logo
NOTICE:  This is the new PunchCAD forum. You should have received an email with your new password around August 27, 2014. If you did not, or would like it reset, simply use the Lost Password feature, and enter Answer as the security answer.
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Options
Go to last post Go to first unread
24c  
#1 Posted : Tuesday, June 11, 2019 3:26:15 PM(UTC)
24c

Rank: Senior Member

Joined: 7/27/2015(UTC)
Posts: 249
United Kingdom

Thanks: 32 times
Was thanked: 37 time(s) in 30 post(s)
Hi,

I've just acquired a CNC mill, aka an old knee mill with some CNC adaptions/conversions.
Yes, it works X & Y motions are fine, but the Z axis aka "knee" lift is not clever, and I fancy I'lll be doing a quill conversion, with a gearbox "knee" lift
I also have a manual version of the same mill, so I have my work cut out, but it's a toe in the water approach for now, and allows me to dabble. :)
I'm curious if anybody has any CAM recommendations.
Obviously lower cost would be a start, and ability to talk to Mach3Mill would be an advantage.
This is a work in progress, as I intend to upgrade the mill, to make it more precise & capable.

Mike
macOS 14.3.1 (Sonoma) - MacBook M1 Max 64GB 2TB SSD & external display - SharkCAD Pro v14.1.0 build 1652
Glicinus  
#2 Posted : Tuesday, July 2, 2019 2:16:10 AM(UTC)
Glicinus

Rank: Guest

Joined: 2/21/2018(UTC)
Posts: 6

Thanks: 1 times
You can try CamBam. It's quite easy to use with Mach3.

Edited by user Tuesday, July 2, 2019 2:21:16 AM(UTC)  | Reason: Not specified

Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.