logo
NOTICE:  This is the new PunchCAD forum. You should have received an email with your new password around August 27, 2014. If you did not, or would like it reset, simply use the Lost Password feature, and enter Answer as the security answer.
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
Remove chamfers and fillets on Dumb Solids, with 'Thicken Solids'
Options
Go to last post Go to first unread
Previous Topic Next Topic
L. Banasky  
#1 Posted : Monday, May 28, 2018 5:30:09 AM(UTC)
L. Banasky

Rank: Senior Member

Joined: 2/16/2007(UTC)
Posts: 606

Thanks: 160 times
Was thanked: 156 time(s) in 106 post(s)
After working on this bracket, I was left with a dumb solid. Wanted to remove the fillets
and chamfers. In earlier versions I would ‘Thicken Solid’ plus or minus and have to ‘Trim
Solid’ to square up the corners.
Now just enter any greater value, plus for chamfers and inside fillets, or minus for an
outside radius, and the corners are automatically squared.
Apologies if this has been mentioned before, but this is an improvement for me.
Larry

http://www.screencast.com/t/H6rCTHB8Qb

Works on holes also.

http://www.screencast.com/t/77YbChIy

Edited by user Monday, May 28, 2018 7:26:50 AM(UTC)  | Reason: Not specified
Back to top
thanks 1 user thanked L. Banasky for this useful post.
GARLIC on 5/28/2018(UTC)
rockyroad_us  
#2 Posted : Monday, May 28, 2018 3:36:15 PM(UTC)
rockyroad_us

Rank: Senior Member

Joined: 9/12/2009(UTC)
Posts: 608
Man
United States
Location: In my place

Was thanked: 59 time(s) in 51 post(s)
Interested way of using that tool on chamfered holes on a solid. I don't know about you but I seek productivity. Wouldn't be easy to delete the hole along with the chamfer in one step using the remove face tool?

I would not have guessed to use that tool on a solid. It appears to have been made to thicken a surface instead. I suppose it works on a surface of a solid as you have shown.

FX 7-FXPro14-1650
MacPro 11.7.4
2x2.8GHz Quad Xeon 32GB
NVIDIA 4 K5000 4GB
Work
Back to top
WWW
thanks 1 user thanked rockyroad_us for this useful post.
L. Banasky on 5/29/2018(UTC)
Antoine  
#3 Posted : Tuesday, May 29, 2018 3:06:46 AM(UTC)
Antoine

Rank: Senior Member

Joined: 10/14/2014(UTC)
Posts: 219
Man
Switzerland

Thanks: 2 times
Was thanked: 32 time(s) in 26 post(s)
good idea!
Thank you!

Antoine
dayer-design.ch
mrconcepts.ch
SharkFX 12
Back to top
WWW BLOG
L. Banasky  
#4 Posted : Tuesday, May 29, 2018 9:43:28 AM(UTC)
L. Banasky

Rank: Senior Member

Joined: 2/16/2007(UTC)
Posts: 606

Thanks: 160 times
Was thanked: 156 time(s) in 106 post(s)
Thanks rockyroad_us,
The 'Remove Face' tool works even better. I use very little of the tools available,
I tried the 'Gripper', never use it, never use 'Push and Pull' and rarely use
any surfacing tools.
The tools I need the most 'Model-to-Sheet' seem to get the least attention from
the developers, and yes, drawings are still needed and required.

Larry
Back to top
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF.NET 2.1.2 | YAF.NET © 2003-2025, Yet Another Forum.NET