cone solid model primitive additional functionality - Suggestions

Welcome Guest! To enable all features please Login or Register.

Notification

Error

cone solid model primitive additional functionality - suggest adding "included angle" option

Options

Previous Topic Next Topic

Art Smith		#1 Posted : Wednesday, July 22, 2015 12:32:48 AM(UTC)
Rank: Senior Member Joined: 1/16/2015(UTC) Posts: 351 Thanks: 49 times Was thanked: 43 time(s) in 30 post(s)		the number one thing I use the cone solid model primitive for is countersinks. it would be huge help if an "included angle" option was added to preclude needing to find the calculator every time a countersink for a fastener (bolt or rivet) needed to be drawn; ie: something to put in the "height" box. the "height" of 82 degree, 90 degree, and 120 degree countersinks for all the various sizes used is something that always has to be calculated................... thanks Art Smith [email protected]


User Profile View All Posts by User View Thanks

Tim Olson		#2 Posted : Wednesday, July 22, 2015 11:00:21 AM(UTC)
Rank: Senior Member Joined: 2/2/2007(UTC) Posts: 5,447 Was thanked: 502 time(s) in 353 post(s)		Hi Art Does the Drill Point setting help? Tim Tim Olson attached the following image(s): drillPoint.png (54kb) downloaded 21 time(s). You cannot view/download attachments. Try to login or register.
		Tim Olson IMSI Design/Encore


User Profile View All Posts by User View Thanks

Art Smith		#3 Posted : Wednesday, July 22, 2015 2:44:19 PM(UTC)
Rank: Senior Member Joined: 1/16/2015(UTC) Posts: 351 Thanks: 49 times Was thanked: 43 time(s) in 30 post(s)		Tim- exactly the type of user interface I was imagining!! the cone solid model primitive was my first choice because it's a "one click" operation to get something to subtract. try as I might at the CAD station, still approach most things like an amateur Bridgeport operator....................... ie: drill/bore/ream the hole then change the tool and add the countersink before moving the table to the next location. at least in the CAD domain all the holes can be done at once and the same for the countersinks. Art Smith [email protected]


User Profile View All Posts by User View Thanks

L. Banasky		#4 Posted : Friday, July 24, 2015 6:17:21 AM(UTC)
Rank: Senior Member Joined: 2/16/2007(UTC) Posts: 601 Thanks: 153 times Was thanked: 149 time(s) in 102 post(s)		I posted a question about countersink angles a couple of years ago. http://forum.punchcad.co...sts&t=4254#post10553 I use 82 Deg. Flat Head Socket Head Cap Screws. I have to enter 49 Deg. to have an 82 Deg. included angle in MTS, doesn't really make sense to me. Now that I have seen the example of the drill point in the Inspector, I am really confused. The example shows a 110 Deg. drill point, if you dimension the angle in MTS it is 139.9 Deg. To obtain a 110 Deg. angle in MTS you have to enter 124.938 Deg. in the Inspector. I use 118 Deg. and 135 Deg. drill points, and have to enter 120.938 Deg. for the 118 Deg. drill point in MTS, and 112.438 Deg. for the 135 Deg. drill point in MTS. Please explain this. Thanks, Larry


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest

Forum Jump

You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.