logo
NOTICE:  This is the new PunchCAD forum. You should have received an email with your new password around August 27, 2014. If you did not, or would like it reset, simply use the Lost Password feature, and enter Answer as the security answer.
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
How to create a cutout of a shape from a solid? - Need Help! Having trouble
Options
Go to last post Go to first unread
Previous Topic Next Topic
mpix00  
#1 Posted : Saturday, March 14, 2015 7:11:15 AM(UTC)
mpix00

Rank: Junior Member

Joined: 1/21/2015(UTC)
Posts: 28

Thanks: 1 times
I am having trouble trying to cut out a shape from my material in VIACAD 2d/3d V9. I have a 4" long by 3" wide by .313" thick plate. I want to cut out 1/16" thick "S-type Wavey" patterns that run across the top of my material. They will cut down into the material 1/16" as well. I start off by making an extruded 4" x 1/16" x 1/16" extruded rectangle, but I do not know how to bend the extruded rectangle into "Wavy Patterns". Is there a way to bend the extruded rectangle, or is this something I have to do by drawing the "Wavy patterns" in 2d and than extrude into 3d?
Back to top
jdi000  
#2 Posted : Saturday, March 14, 2015 7:33:49 AM(UTC)
jdi000

Rank: Administration

Joined: 7/29/2007(UTC)
Posts: 1,862
United States

Thanks: 1 times
Was thanked: 87 time(s) in 81 post(s)
Hello

Draw the shape in 2d first then you can use cutout tool or extrude and subtract shape from the plate.

Regards
Jason
Windows 11, 10
Back to top
mpix00  
#3 Posted : Saturday, March 14, 2015 7:45:59 AM(UTC)
mpix00

Rank: Junior Member

Joined: 1/21/2015(UTC)
Posts: 28

Thanks: 1 times
Originally Posted by: jdi000 Go to Quoted Post
Hello

Draw the shape in 2d first then you can use cutout tool or extrude and subtract shape from the plate.

Regards
Jason


How do I draw the S-type wavy pattern in 2d?
Back to top
jdi000  
#4 Posted : Saturday, March 14, 2015 7:58:52 AM(UTC)
jdi000

Rank: Administration

Joined: 7/29/2007(UTC)
Posts: 1,862
United States

Thanks: 1 times
Was thanked: 87 time(s) in 81 post(s)
Do you have specific dimensions or is this completely free form shape?

Regards

Jason
Windows 11, 10
Back to top
mpix00  
#5 Posted : Saturday, March 14, 2015 8:41:30 AM(UTC)
mpix00

Rank: Junior Member

Joined: 1/21/2015(UTC)
Posts: 28

Thanks: 1 times
Originally Posted by: jdi000 Go to Quoted Post
Do you have specific dimensions or is this completely free form shape?

Regards

Jason


4" long rectangle that is 1/16" thick and 5/16" high
Back to top
Guest  
#6 Posted : Saturday, March 14, 2015 9:28:52 AM(UTC)
Guest

Rank: Guest

Joined: 8/27/2014(UTC)
Posts: 394

Was thanked: 13 time(s) in 12 post(s)
You can use the spline tool for the "S" shape, offset, linear duplicate, extrude, and then subtract.
Guest attached the following image(s):
Plate.JPG (56kb) downloaded 12 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
mpix00  
#7 Posted : Sunday, March 15, 2015 8:29:55 AM(UTC)
mpix00

Rank: Junior Member

Joined: 1/21/2015(UTC)
Posts: 28

Thanks: 1 times
Originally Posted by: Guest Go to Quoted Post
You can use the spline tool for the "S" shape, offset, linear duplicate, extrude, and then subtract.


Oh Wow,
That is exactly what I'm trying to do. when I create using the spline tool, How do I create the "S"Shape like that? Also how do I use the offset? I know how to linear duplicate,extrude and the subtract, but I don't know how to use the spline tool to create "S"Shape and I do not know how to use the Offset. Thank you for your time and can't wait for your reply!!
Back to top
L. Banasky  
#8 Posted : Sunday, March 15, 2015 10:00:12 AM(UTC)
L. Banasky

Rank: Senior Member

Joined: 2/16/2007(UTC)
Posts: 602

Thanks: 153 times
Was thanked: 149 time(s) in 102 post(s)
Offset by distance, type in .063, an then select which side of the line you want to offset.
L. Banasky attached the following image(s):
Plate2.JPG (115kb) downloaded 11 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
mpix00  
#9 Posted : Monday, March 16, 2015 11:34:22 AM(UTC)
mpix00

Rank: Junior Member

Joined: 1/21/2015(UTC)
Posts: 28

Thanks: 1 times
Originally Posted by: L. Banasky Go to Quoted Post
Offset by distance, type in .063, an then select which side of the line you want to offset.


How did you get the grid pattern to follow the dots and where do i go to enter the offset?
Back to top
mpix00  
#10 Posted : Monday, March 16, 2015 11:43:33 AM(UTC)
mpix00

Rank: Junior Member

Joined: 1/21/2015(UTC)
Posts: 28

Thanks: 1 times
Originally Posted by: mpix00 Go to Quoted Post
Originally Posted by: L. Banasky Go to Quoted Post
Offset by distance, type in .063, an then select which side of the line you want to offset.


How did you get the grid pattern to follow the dots and where do i go to enter the offset?

For some reason, I am not getting this. Where is points along a curve located? I try to use the spline tool by control point spline and my S pattern looks nothing like that? How do i get that grid with the dots like you have and how do I make it in that S pattern?
Back to top
rokoko  
#11 Posted : Monday, March 16, 2015 11:59:54 AM(UTC)
rokoko

Rank: Senior Member

Joined: 9/28/2013(UTC)
Posts: 345

Thanks: 4 times
Was thanked: 57 time(s) in 45 post(s)
hi,

the tool ist located in the points-tool, see picture. first draw a simple line, next choose points-along-line with settings as needed and select your line
rokoko attached the following image(s):
pointalongcurve.png (36kb) downloaded 5 time(s).

You cannot view/download attachments. Try to login or register.
viacad pro 10 powerpackpro, viacad pro 9 german, mac
Back to top
mpix00  
#12 Posted : Monday, March 16, 2015 1:03:12 PM(UTC)
mpix00

Rank: Junior Member

Joined: 1/21/2015(UTC)
Posts: 28

Thanks: 1 times
Originally Posted by: rokoko Go to Quoted Post
hi,

the tool ist located in the points-tool, see picture. first draw a simple line, next choose points-along-line with settings as needed and select your line


perfect, got that thanks, Now when i try to offset by distance, how do i pick which direction? I try to click on below the curve or above it and nothing happens except the S curves turn red as if i selected them, and than when i click a direction it just unselects the S curves? How do i pick the direction?
Back to top
mpix00  
#13 Posted : Monday, March 16, 2015 5:30:01 PM(UTC)
mpix00

Rank: Junior Member

Joined: 1/21/2015(UTC)
Posts: 28

Thanks: 1 times
Originally Posted by: L. Banasky Go to Quoted Post
Offset by distance, type in .063, an then select which side of the line you want to offset.


Originally Posted by: L. Banasky Go to Quoted Post
Offset by distance, type in .063, an then select which side of the line you want to offset.


How do I select the side of the line I want. I made the S wave form but when I offset by distance and it tells me to pick which side, I click the mouse on whatever side, but it just deselects the wave form and asks me again to pick the wave form and pick which side again? Is there an option where to pick which side or do I just click my mouse on that side?
Back to top
mpix00  
#14 Posted : Tuesday, March 17, 2015 2:14:26 AM(UTC)
mpix00

Rank: Junior Member

Joined: 1/21/2015(UTC)
Posts: 28

Thanks: 1 times
Originally Posted by: rokoko Go to Quoted Post
hi,

the tool ist located in the points-tool, see picture. first draw a simple line, next choose points-along-line with settings as needed and select your line


Do I have to use the points-tool for the offset to work properly? Because I made the "S"Pattern with just using the spline tool without the points-tool. The only problem is when I try to copy the "S" pattern and use the offset tool, it asks me to select the Curve I want to offset so I select my one "S" Pattern I just made and my "S"Patter turns red. Then it asks me to select which side of the spline curve I want to place the offset and when I mouse click above or below my Red Selected "S"Pattern, it de-selects my "S" pattern and then asks me to again to select the spline curve I want to offset. So I have no idea how to select which side to place the offset? I would have thought that you would select with just the click of the mouse either below or above the selected spline curver I just made. Please help!
Back to top
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF.NET 2.1.2 | YAF.NET © 2003-2024, Yet Another Forum.NET