logo
NOTICE:  This is the new PunchCAD forum. You should have received an email with your new password around August 27, 2014. If you did not, or would like it reset, simply use the Lost Password feature, and enter Answer as the security answer.
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Options
Go to last post Go to first unread
Filip  
#1 Posted : Monday, September 23, 2013 2:52:31 PM(UTC)
Filip

Rank: Senior Member

Joined: 12/30/2010(UTC)
Posts: 126

Hi,

I have a problem with 2D Model to Sheet. When I have 3D model and create in Shark Precise Curves I cannot get ARCs "lines". Model to Sheet create Splines.
Problem is because I cannot after that find Radial dimension or Angular dimension.

Do you find some solution for this problem?
zumer  
#2 Posted : Tuesday, September 24, 2013 9:39:23 PM(UTC)
zumer

Rank: Senior Member

Joined: 11/4/2007(UTC)
Posts: 515

Was thanked: 1 time(s) in 1 post(s)
Checking 'simplify curves' in viewport properties might do what you want.
Filip  
#3 Posted : Thursday, September 26, 2013 10:23:57 AM(UTC)
Filip

Rank: Senior Member

Joined: 12/30/2010(UTC)
Posts: 126

Thanks, but I will have then get lines.
And I will not be able to check angle.
zumer  
#4 Posted : Thursday, September 26, 2013 4:58:34 PM(UTC)
zumer

Rank: Senior Member

Joined: 11/4/2007(UTC)
Posts: 515

Was thanked: 1 time(s) in 1 post(s)
Try 'flatten view'.
zumer  
#5 Posted : Friday, September 27, 2013 6:24:58 PM(UTC)
zumer

Rank: Senior Member

Joined: 11/4/2007(UTC)
Posts: 515

Was thanked: 1 time(s) in 1 post(s)
Try "flatten view".
Filip  
#6 Posted : Saturday, September 28, 2013 2:18:17 AM(UTC)
Filip

Rank: Senior Member

Joined: 12/30/2010(UTC)
Posts: 126

Thanks for interest.

I have attached IGES file in 3D. And I wish to create Model to Sheet and check Angle Dimension. But I get spliens. Propably there is no way to do this in easy way.

But Do you know if this is tool or somone create macro which able to check angle directly from 3D model?
File Attachment(s):
RT6_250100-5-01.zip (1,060kb) downloaded 7 time(s).
Filip attached the following image(s):
how_to_get_value_radius.png (80kb) downloaded 7 time(s).

You cannot view/download attachments. Try to login or register.
memphisjed  
#7 Posted : Saturday, September 28, 2013 7:42:08 AM(UTC)
memphisjed

Rank: Senior Member

Joined: 12/19/2010(UTC)
Posts: 115

Thanks: 20 times
Was thanked: 9 time(s) in 8 post(s)
Angle is dependent on point of view, guessing angle off a section in model2sheet? covert spline to arc (coolest tool in vc), or model to sheet with lines. vcp lacks precise, so this is default for me. Pull angle dim like normal, for radial dimensions draw 3 point arcs.
in example I pulled 2, one overall, one for upper half.
File Attachment(s):
ViaCAD Pro (filip.pdf (62kb) downloaded 7 time(s).

You cannot view/download attachments. Try to login or register.
Filip  
#8 Posted : Saturday, September 28, 2013 2:03:43 PM(UTC)
Filip

Rank: Senior Member

Joined: 12/30/2010(UTC)
Posts: 126

Thanks,

Yes with added additionals lines, arc, it is possible to measure.

I also saw in one software direclty measurement from 3D model. Sometimes you open file and just want in the fastest way to see demension., angles etc.
Users browsing this topic
Guest (8)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.