logo
NOTICE:  This is the new PunchCAD forum. You should have received an email with your new password around August 27, 2014. If you did not, or would like it reset, simply use the Lost Password feature, and enter Answer as the security answer.
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
"Tools" staying selected while making other actions... (#930)
Options
Go to last post Go to first unread
Previous Topic Next Topic
ianjkirby  
#1 Posted : Wednesday, April 9, 2008 8:28:05 AM(UTC)
ianjkirby

Rank: Senior Member

Joined: 6/20/2007(UTC)
Posts: 107
Recently I have had a lot of difficulty trying to select edges for filleting two adjacent solids. The difficulty arises because partway through the selection process I need to rotate or translate the model to be able to "see" the next edge to select. When I choose the rotate or translate tools, the fillet tool and those selections already made disappear. Is there something I am missing here, or is it meant to work like that? A package I used in another life allowed me to zip off to the toolbar to select a translation or zoom tool, and when finished with it, the previous modelling tool was still current, as were any selections already made. Anyone care to comment?
Regards, Ian Kirby.
Wollongong NSW Australia
Ian Kirby
Wollongong Australia
Back to top
nick  
#2 Posted : Wednesday, April 9, 2008 9:58:53 AM(UTC)
nick

Rank: Senior Member

Joined: 2/2/2007(UTC)
Posts: 245
Hello Ian

Just use the scroll wheel of your mouse to rotate / zoom as required. This shouldn't effect your selections.

All the best
Nick
Back to top
WWW
ianjkirby  
#3 Posted : Thursday, April 10, 2008 3:19:42 PM(UTC)
ianjkirby

Rank: Senior Member

Joined: 6/20/2007(UTC)
Posts: 107
Thanks, Nick. What about if one NEEDS to translate/rotate an object in order to be able to make the next selection? Is there a way to do this without losing one's previously selected data?
Regards, Ian Kirby.
Wollongong NSW Australia
Ian Kirby
Wollongong Australia
Back to top
nick  
#4 Posted : Thursday, April 10, 2008 3:27:45 PM(UTC)
nick

Rank: Senior Member

Joined: 2/2/2007(UTC)
Posts: 245
Hello Ian

Sorry but I must be missing your point, if you use the middle mouse button you can translate, rotate and zoom view whilst maintaining existing selections.

All the best
Nick
Back to top
WWW
ianjkirby  
#5 Posted : Sunday, April 13, 2008 7:02:11 AM(UTC)
ianjkirby

Rank: Senior Member

Joined: 6/20/2007(UTC)
Posts: 107
Thankyou Nick,
My fault! I don't have a mouse, and use the trackpad on my Macbook, which I have just learned how to drive (in Viacad). One needs to be a bit like a pianist, using several fingers, and several sides of one's brain, but I have made it work. Thanks for your patience.
Regards, Ian Kirby.
Wollongong NSW Australia
Ian Kirby
Wollongong Australia
Back to top
nick  
#6 Posted : Sunday, April 13, 2008 10:24:58 AM(UTC)
nick

Rank: Senior Member

Joined: 2/2/2007(UTC)
Posts: 245
Hello Ian

No problem. I can't recommend a mouse with a wheel enough, they improve your productivity immensely.

All the best
Nick
Back to top
WWW
Todd Quinlan  
#7 Posted : Thursday, April 17, 2008 2:58:10 PM(UTC)
Todd Quinlan

Rank: Administration

Joined: 4/20/2007(UTC)
Posts: 97

Was thanked: 7 time(s) in 7 post(s)
Hello Ian

When you are using the fillet tool and you want to rotate or move the object to get a better view of your object, you do not want to use the rotate or translate tools. These tools will actually rotate or move the part. What you want to do is use the dynamic rotate tool to rotate your view of the part or the dynamic pan tool to move your view of the part. however, regardless of the tool you change to you will lose the existing tool you are currently using.

Nick is correct in recommending a wheel mouse. The wheel mouse allows you to use the dynamic rotate, dynamic pan and zoom in and out with out switching tools. Without one, you will need to take care in setting your view of the object in the proper angle before selecting the fillet tool, so that you can have access to the edges you need without moving the view after you select the fillet tool.
Todd Q
CAD Support Specialist
Encore Software/ IMSI Design
Back to top
nick  
#8 Posted : Friday, April 18, 2008 12:00:43 PM(UTC)
nick

Rank: Senior Member

Joined: 2/2/2007(UTC)
Posts: 245
Hello All

You can also change your display mode to wireframe to allow you to select an edge on the reverse side of an object, just make sure you keep the shift key held down if you do this whilst attempting to select multiple edges.

All the best
Nick
Back to top
WWW
ianjkirby  
#9 Posted : Friday, April 18, 2008 4:23:15 PM(UTC)
ianjkirby

Rank: Senior Member

Joined: 6/20/2007(UTC)
Posts: 107
Thanks Todd and Nick,
I understand the need to use dynamic views rather than model moves. It just took me a while to work out then remember to hold down the shift key through the dynamic viewing process!!
Regards, Ian Kirby.
Wollongong NSW Australia
Ian Kirby
Wollongong Australia
Back to top
jlm  
#10 Posted : Saturday, April 19, 2008 2:27:33 PM(UTC)
jlm

Rank: Senior Member

Joined: 2/18/2007(UTC)
Posts: 1,260
Man
France
Location: Paris & Frankfurt

Thanks: 224 times
Was thanked: 173 time(s) in 105 post(s)
nick wrote:

You can also change your display mode to wireframe
Nick

You can also set the object display info to transparent.
I find it easier...
JL
Back to top
WWW
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF.NET 2.1.2 | YAF.NET © 2003-2025, Yet Another Forum.NET