logo
NOTICE:  This is the new PunchCAD forum. You should have received an email with your new password around August 27, 2014. If you did not, or would like it reset, simply use the Lost Password feature, and enter Answer as the security answer.
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
Conic Tool issue - Rho Value seems completely wrong
Options
Go to last post Go to first unread
Previous Topic Next Topic
sweboss  
#1 Posted : Wednesday, February 8, 2023 4:58:54 AM(UTC)
sweboss

Rank: Member

Joined: 5/11/2022(UTC)
Posts: 8

Thanks: 2 times
Was thanked: 4 time(s) in 4 post(s)
When using the Conic Tool, whether it's the Two Point, Three Point or Four Point Tool, the Rho Value is not giving the expected result. As I understood the Rho Value is defined as A divided by B, whereas A is the top of the curve and B is the vertex.

When I change the Rho Value to 0.75 I got the curve I expected for Rho 0.5 and with Rho 0.5 as set value the curve is almost flat.

TurboCAD 14
Mac OS Ventura 13.2
MacBook Pro 15'' 2018
sweboss attached the following image(s):
Rho Factor 3.png (206kb) downloaded 4 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
thanks 1 user thanked sweboss for this useful post.
specktech on 4/10/2023(UTC)
Tim Olson  
#2 Posted : Wednesday, February 8, 2023 9:53:20 AM(UTC)
Tim Olson

Rank: Senior Member

Joined: 2/2/2007(UTC)
Posts: 5,447
United States

Was thanked: 502 time(s) in 353 post(s)
It looks good here.

This is how we checked/calculated Rho at Lockheed, which is also the same method used by Dassault for ACIS.

Rho of 0.707 with straight and equal distances to control point should yield an exact arc.
Rho of 0.5 with straight and equal distances to control point should yield a line.
Rho is ratio to shoulder point and control point.
Shoulder is intersection of diagonal and conic.

Where rho > 0.5 and < 1.0.

Tim

Edited by user Wednesday, February 8, 2023 7:17:45 PM(UTC)  | Reason: Not specified

File Attachment(s):
rhoCheck.png (654kb) downloaded 17 time(s).

You cannot view/download attachments. Try to login or register.
Tim Olson
IMSI Design/Encore
Back to top
thanks 2 users thanked Tim Olson for this useful post.
GARLIC on 2/8/2023(UTC), specktech on 4/10/2023(UTC)
sweboss  
#3 Posted : Wednesday, February 8, 2023 10:32:39 AM(UTC)
sweboss

Rank: Member

Joined: 5/11/2022(UTC)
Posts: 8

Thanks: 2 times
Was thanked: 4 time(s) in 4 post(s)
Thanks, Tim.

It seems though that you are referring to another definition than what I once learned, which is as enclosed graph.
Anyway, now I know how it's calculated in TurboCAD.

Edited by user Wednesday, February 8, 2023 10:35:13 AM(UTC)  | Reason: Not specified

File Attachment(s):
Skärmavbild 2023-02-08 kl. 17.23.03.png (720kb) downloaded 10 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
thanks 1 user thanked sweboss for this useful post.
specktech on 4/10/2023(UTC)
Tim Olson  
#4 Posted : Wednesday, February 8, 2023 11:29:11 AM(UTC)
Tim Olson

Rank: Senior Member

Joined: 2/2/2007(UTC)
Posts: 5,447
United States

Was thanked: 502 time(s) in 353 post(s)
I am a fan of conics:) Conic and polyconic surfaces was the preferred surface of choice for exterior configuration design of the F-16, F-22, and F-35.

No inflections and they stayed tangent at edges as you changed the rho to increase/decrease cross sectional area distributions during advanced design phases.

For the F-16, most surfaces are polyconic with the remainder ruled. Even the most difficult surface being the lip of the smiley duct was created using polyconic surfaces and a spine:)

For F-22 & F-35 production we moved over to CATIA where conic surfaces were elevated to higher order to get certain curvature distributions, but were still based on the same core definitions.

Tim

Edited by user Thursday, February 9, 2023 3:33:01 PM(UTC)  | Reason: Not specified

Tim Olson
IMSI Design/Encore
Back to top
thanks 3 users thanked Tim Olson for this useful post.
GARLIC on 2/8/2023(UTC), sweboss on 2/8/2023(UTC), specktech on 4/10/2023(UTC)
jlm  
#5 Posted : Thursday, February 9, 2023 8:17:59 AM(UTC)
jlm

Rank: Senior Member

Joined: 2/18/2007(UTC)
Posts: 1,252
Man
France
Location: Paris & Frankfurt

Thanks: 217 times
Was thanked: 164 time(s) in 101 post(s)
Originally Posted by: Tim Olson Go to Quoted Post
I am a fan of conics:)

Tim


I'm a fan of conics too.
My projects can't fly like F16, but sometimes they sell like hot cakes...

jlm attached the following image(s):
Adidas_3_W_001.JPG.jpg (12kb) downloaded 1 time(s).
Red Compacts 04-top2.jpg (195kb) downloaded 1 time(s).
Red-Lipstick-07-2.jpg (119kb) downloaded 1 time(s).
IMG_5751.jpg (65kb) downloaded 2 time(s).
lov.png (90kb) downloaded 3 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
WWW
thanks 1 user thanked jlm for this useful post.
specktech on 4/10/2023(UTC)
jlm  
#6 Posted : Thursday, February 9, 2023 8:35:30 AM(UTC)
jlm

Rank: Senior Member

Joined: 2/18/2007(UTC)
Posts: 1,252
Man
France
Location: Paris & Frankfurt

Thanks: 217 times
Was thanked: 164 time(s) in 101 post(s)
Originally Posted by: jlm Go to Quoted Post
Originally Posted by: Tim Olson Go to Quoted Post
I am a fan of conics:)

Tim


I'm a fan of conics too.
My projects can't fly like F16, but sometimes they sell like hot cakes...



jlm attached the following image(s):
Adidas_3_W_001.JPG (37kb) downloaded 2 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
WWW
thanks 2 users thanked jlm for this useful post.
damhave on 2/9/2023(UTC), specktech on 4/10/2023(UTC)
Jean-Francois Jacques  
#7 Posted : Thursday, February 9, 2023 1:35:06 PM(UTC)
Jean-Francois Jacques

Rank: Senior Member

Joined: 11/25/2009(UTC)
Posts: 833
Canada

Thanks: 2 times
Was thanked: 29 time(s) in 21 post(s)
Good to know! I did an upper part with conics, and now I want to do the lower part with an other conics (like an airplane wing). How can I do a continuity with the right part of my geometry. (tangent with an other conics) ??
Jean-Francois Jacques attached the following image(s):
Screenshot 2023-02-09 at 14.34.54.png (61kb) downloaded 0 time(s).

You cannot view/download attachments. Try to login or register.
METEORE DESIGN / KEKO Stand
Jean-Francois Jacques, Industrial Designer
SharkCad Pro V14 B1653
Platform macOS 14 Sonoma
Back to top
WWW
Tim Olson  
#8 Posted : Thursday, February 9, 2023 2:48:24 PM(UTC)
Tim Olson

Rank: Senior Member

Joined: 2/2/2007(UTC)
Posts: 5,447
United States

Was thanked: 502 time(s) in 353 post(s)
You might try using TWO four point conics where the control points go through a shared line at the leading edge.

That will get you tangent continuity.

If you want rough curvature continuity, manually elevate the conic to order 5 and moved some of neighboring control points around. Use the verify : curvature circle at the leading edge for guidance.

I wish we had a curvature match tool available for curves. Our 2D DCM solver offers a curvature constraint, maybe I should explore hooking that up

Normally airfoils have curvature/camber distributions as part of their definition. Something else you can do is visit this site...

http://airfoiltools.com/airfoil/naca4digit

Create your airfoil and then copy the Dat file into a text file. Remove everything but the x,y points and then import this as a Spline file into Shark.


Tim

Edited by user Thursday, February 9, 2023 11:53:14 PM(UTC)  | Reason: Not specified

File Attachment(s):
fourPoint.png (1,240kb) downloaded 11 time(s).

You cannot view/download attachments. Try to login or register.
Tim Olson
IMSI Design/Encore
Back to top
thanks 2 users thanked Tim Olson for this useful post.
GARLIC on 2/10/2023(UTC), specktech on 4/10/2023(UTC)
Tim Olson  
#9 Posted : Thursday, February 9, 2023 2:55:45 PM(UTC)
Tim Olson

Rank: Senior Member

Joined: 2/2/2007(UTC)
Posts: 5,447
United States

Was thanked: 502 time(s) in 353 post(s)
>>>My projects can't fly like F16, but sometimes they sell like hot cakes...

I love that! Thanks for sharing those images.

Tim


Tim Olson
IMSI Design/Encore
Back to top
thanks 1 user thanked Tim Olson for this useful post.
specktech on 4/10/2023(UTC)
Jean-Francois Jacques  
#10 Posted : Thursday, February 9, 2023 4:39:50 PM(UTC)
Jean-Francois Jacques

Rank: Senior Member

Joined: 11/25/2009(UTC)
Posts: 833
Canada

Thanks: 2 times
Was thanked: 29 time(s) in 21 post(s)
Originally Posted by: Tim Olson Go to Quoted Post
You might try using TWO four point conics where the control points go through a shared line at the leading edge.

That will get you tangent continuity.

If you want rough curvature continuity, manually elevate the conic to order 5 and moved some of neighboring control points around. Use the verify : curvature circle at the leading edge for guidance.

I wish we had a curvature match tool available for curves. Our 2D DCM solver offers a curvature constraint, maybe I should explore hooking that up

Normally airfoils have curvature/camber distributions as part of their definition. Something else you can do is visit this site...

http://airfoiltools.com/airfoil/naca4digit

Create your airfoil and then copy the Dat file into a text file. Remove everything but the x,y points and then import this as a Spline file into Shark.


Tim


Thanks TIM !

Edited by moderator Thursday, February 9, 2023 11:19:16 PM(UTC)  | Reason: Not specified

METEORE DESIGN / KEKO Stand
Jean-Francois Jacques, Industrial Designer
SharkCad Pro V14 B1653
Platform macOS 14 Sonoma
Back to top
WWW
Users browsing this topic
Guest (3)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF.NET 2.1.2 | YAF.NET © 2003-2024, Yet Another Forum.NET