logo
NOTICE:  This is the new PunchCAD forum. You should have received an email with your new password around August 27, 2014. If you did not, or would like it reset, simply use the Lost Password feature, and enter Answer as the security answer.
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
along curve text
Options
Go to last post Go to first unread
Previous Topic Next Topic
a.wieneke  
#1 Posted : Tuesday, October 27, 2020 11:21:07 AM(UTC)
a.wieneke

Rank: Member

Joined: 10/10/2014(UTC)
Posts: 50
Man
Germany
Location: Köln ( Cologne )

Thanks: 16 times
Was thanked: 4 time(s) in 4 post(s)
Hello,

i like to draw a ring with text around.
The problem is, to find the right size for the text.
I cannot see how the text looks, when i use 'along curve text'
I want the text horizontel to the ring, see picture.not vertikal, what is a little easier to use.

So, first i need to change objekt type, to see what Text along curve did.
After this i have to do all the steps again.
And it is very difficult and/or not possible to change the textsize.
Is there any hint or a walkaround ?

Thank you very much for every help!

Sorry, i forgot; i tried it with ViaCad 10 pro and with SharkCad 12

Edited by user Tuesday, October 27, 2020 11:52:04 AM(UTC)  | Reason: Not specified

a.wieneke attached the following image(s):
Bildschirmfoto 2020-10-27 um 18.00.07.png (111kb) downloaded 1 time(s).

You cannot view/download attachments. Try to login or register.
viele Grüße
Andreas

http://www.wieneke.biz
SharkCad pro 14
OS X 14.0
Back to top
WWW
GARLIC  
#2 Posted : Tuesday, October 27, 2020 12:10:40 PM(UTC)
GARLIC

Rank: Guest

Joined: 5/8/2015(UTC)
Posts: 165
Man
Germany

Thanks: 506 times
Was thanked: 84 time(s) in 53 post(s)
Hi Andeas: in this particular case I can recommend to make use of MoI3d + flow command, it is very easy, search the forum, there are very many examples of this specific task which might help you in your special workflow.
regards
G.
Back to top
rockyroad_us  
#3 Posted : Wednesday, October 28, 2020 9:20:09 AM(UTC)
rockyroad_us

Rank: Senior Member

Joined: 9/12/2009(UTC)
Posts: 608
Man
United States
Location: In my place

Was thanked: 59 time(s) in 51 post(s)
You can try to use the curve bend tool for solids. Keep in mind that you will need to do trial and error figuring out the alignment orientation but you can accomplish that by drawing a bounding box around the text so you can pick orientation and the two points required. Hope that helps.
FX 7-FXPro14-1650
MacPro 11.7.4
2x2.8GHz Quad Xeon 32GB
NVIDIA 4 K5000 4GB
Work
Back to top
WWW
thanks 1 user thanked rockyroad_us for this useful post.
GARLIC on 10/28/2020(UTC)
a.wieneke  
#4 Posted : Wednesday, October 28, 2020 11:58:38 AM(UTC)
a.wieneke

Rank: Member

Joined: 10/10/2014(UTC)
Posts: 50
Man
Germany
Location: Köln ( Cologne )

Thanks: 16 times
Was thanked: 4 time(s) in 4 post(s)
hello Garlic,

the version of MoI3d is not working with MacOsx, they wrote, i have to wait for Version 4


hello rockyroad_us

the ring on the picture is made with the bend tool. But it streches the letters to much.

Maybe i have to make every letter by hand an move i to the place i want, not very comfortable.
viele Grüße
Andreas

http://www.wieneke.biz
SharkCad pro 14
OS X 14.0
Back to top
WWW
rockyroad_us  
#5 Posted : Wednesday, October 28, 2020 12:10:28 PM(UTC)
rockyroad_us

Rank: Senior Member

Joined: 9/12/2009(UTC)
Posts: 608
Man
United States
Location: In my place

Was thanked: 59 time(s) in 51 post(s)
You might need to figure out the outside perimeter of the ring and draw a line corresponding to the perimeter so that you can position the letters along the line. I don't know how the back of the letters behave. Maybe you can post a file to help.
FX 7-FXPro14-1650
MacPro 11.7.4
2x2.8GHz Quad Xeon 32GB
NVIDIA 4 K5000 4GB
Work
Back to top
WWW
a.wieneke  
#6 Posted : Wednesday, October 28, 2020 12:19:23 PM(UTC)
a.wieneke

Rank: Member

Joined: 10/10/2014(UTC)
Posts: 50
Man
Germany
Location: Köln ( Cologne )

Thanks: 16 times
Was thanked: 4 time(s) in 4 post(s)
here it is:
sorry, i forgot , in this file/version, i made already "change objecttype", with the letters, so you can see the them

Edited by user Wednesday, October 28, 2020 12:24:04 PM(UTC)  | Reason: Not specified

File Attachment(s):
testtext.srk.zip (616kb) downloaded 4 time(s).

You cannot view/download attachments. Try to login or register.
viele Grüße
Andreas

http://www.wieneke.biz
SharkCad pro 14
OS X 14.0
Back to top
WWW
rockyroad_us  
#7 Posted : Wednesday, October 28, 2020 12:58:03 PM(UTC)
rockyroad_us

Rank: Senior Member

Joined: 9/12/2009(UTC)
Posts: 608
Man
United States
Location: In my place

Was thanked: 59 time(s) in 51 post(s)
Here's my attempt. Note that I added a bounding box corresponding to the perimeter of the ring. So when you pick your 2 poins in the curve bend it will correspond to the perimeter. Note that I spaced the letters the way you would want to space them. There's a line I drew which I got from your text spacing to set it off from the end of the box so it will be spaced from the first word since it will bend.

The key is that if I bend the bounding box, you will get that ring which you have extruded. You can suppress the bend feature to see how I arranged the letters in the bounding box.

File Attachment(s):
testtextV2.sfx (994kb) downloaded 6 time(s).

You cannot view/download attachments. Try to login or register.
FX 7-FXPro14-1650
MacPro 11.7.4
2x2.8GHz Quad Xeon 32GB
NVIDIA 4 K5000 4GB
Work
Back to top
WWW
thanks 1 user thanked rockyroad_us for this useful post.
a.wieneke on 10/29/2020(UTC)
murray  
#8 Posted : Wednesday, October 28, 2020 10:47:23 PM(UTC)
murray

Rank: Senior Member

Joined: 9/24/2014(UTC)
Posts: 373
Australia

Thanks: 8 times
Was thanked: 104 time(s) in 85 post(s)
Does your version of SharkCAD 12 or VCP 11 have wrap? It's under solid utilities in SharkCAD Pro, it wraps your text around a solid cylinder, I think that'd make it really easy to visualise spacing and style, it's associative so you can jigger the spacing and everything else. I've used wrap here with your text. To produce the text, I put a solid block under the text curves and extruded the text from it as a single protrusion feature. The text is completely associative and editable, and the height and draft of the protruded letters is editable in concept explorer. I bent the block with text at the face that the text's extruded from around the diameter of the ring, and intersected it with a thickened cylindrical sweep to produce the letters.

Edited by user Wednesday, October 28, 2020 11:11:25 PM(UTC)  | Reason: Not specified

File Attachment(s):
testtextvisualise.sfx (1,616kb) downloaded 2 time(s).
murray attached the following image(s):
ring letters and wrap.PNG (193kb) downloaded 2 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
thanks 2 users thanked murray for this useful post.
GARLIC on 10/29/2020(UTC), a.wieneke on 10/29/2020(UTC)
Keith2019  
#9 Posted : Thursday, October 29, 2020 5:25:42 AM(UTC)
Keith2019

Rank: Guest

Joined: 9/18/2019(UTC)
Posts: 20
Australia

Thanks: 18 times
Was thanked: 8 time(s) in 6 post(s)
Hello Andreas,

I found a YouTube video called "Punch!Cad v12 Tutorials - Wrap (Imprint, Emboss, Engrave). It is very good and informative. Maybe it can help you.

I will try to copy the link here: [url=https://www.youtube.com/watch?v=5GAk5UzVscs]. https://www.youtube.com/watch?v=5GAk5UzVscs

Regards,

Keith
Back to top
thanks 1 user thanked Keith2019 for this useful post.
a.wieneke on 10/29/2020(UTC)
a.wieneke  
#10 Posted : Thursday, October 29, 2020 5:39:28 AM(UTC)
a.wieneke

Rank: Member

Joined: 10/10/2014(UTC)
Posts: 50
Man
Germany
Location: Köln ( Cologne )

Thanks: 16 times
Was thanked: 4 time(s) in 4 post(s)
Thank you rockyroad_us,

I have the impression that some letters are mirrored.8see picture)
but i will play araound with this solution

---

Thank you murry,
yes sharkCad has wrap. I will try this and think it is my solution.

---

Yes, thank you Keith2019

for the youTube link.
i have seen this, monthe ago and forgot it, shame on me :-)
a.wieneke attached the following image(s):
Bildschirmfoto 2020-10-29 um 12.32.16.png (192kb) downloaded 1 time(s).

You cannot view/download attachments. Try to login or register.
viele Grüße
Andreas

http://www.wieneke.biz
SharkCad pro 14
OS X 14.0
Back to top
WWW
Users browsing this topic
Guest (5)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF.NET 2.1.2 | YAF.NET © 2003-2024, Yet Another Forum.NET