logo
NOTICE:  This is the new PunchCAD forum. You should have received an email with your new password around August 27, 2014. If you did not, or would like it reset, simply use the Lost Password feature, and enter Answer as the security answer.
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
Beginner q on moving and aligning 2 objects
Options
Go to last post Go to first unread
Previous Topic Next Topic
shorton  
#1 Posted : Wednesday, May 8, 2019 11:22:25 AM(UTC)
shorton

Rank: Guest

Joined: 5/3/2019(UTC)
Posts: 11

Thanks: 4 times
Was thanked: 5 time(s) in 5 post(s)
I am trying to get a handle (no pun intended) on how to move a solid and align with another one in VC

In my example I have (2) cubes. #1 is a 3x3x3. #2 is a 1x1x1

I want to move the smaller cube #2 to where it's top face is on the same plane as the top of Cube #1, with #2 centered inside #2 in the X-Y directions.

I don't see how to snap to a face. In my old software I could snap to the face to be moved, then pick a move tool and snap to the face of the other cube.

What is the correct way to do this? Preferably without any construction lines.
Back to top
thanks 1 user thanked shorton for this useful post.
specktech on 2/14/2022(UTC)
UGMENTALCASE  
#2 Posted : Wednesday, May 8, 2019 11:45:09 AM(UTC)
UGMENTALCASE

Rank: Senior Member

Joined: 3/21/2017(UTC)
Posts: 952
Man
United Kingdom

Thanks: 46 times
Was thanked: 319 time(s) in 212 post(s)
There is a magnet tool (symbol is literally a magnet :-)) And within that toolbar is a number of alignment tools. You click one and get I think 4 extras that pop out. Face to face, hole alignment thing and a few others.
Back to top
thanks 1 user thanked UGMENTALCASE for this useful post.
specktech on 2/14/2022(UTC)
rockyroad_us  
#3 Posted : Wednesday, May 8, 2019 11:45:17 AM(UTC)
rockyroad_us

Rank: Senior Member

Joined: 9/12/2009(UTC)
Posts: 608
Man
United States
Location: In my place

Was thanked: 59 time(s) in 51 post(s)
You can use the magnet tool. I recall there being a video as far as using the alignment tools such as mating. Can't find it anymore.
FX 7-FXPro14-1650
MacPro 11.7.4
2x2.8GHz Quad Xeon 32GB
NVIDIA 4 K5000 4GB
Work
Back to top
WWW
thanks 1 user thanked rockyroad_us for this useful post.
specktech on 2/14/2022(UTC)
shorton  
#4 Posted : Wednesday, May 8, 2019 4:06:34 PM(UTC)
shorton

Rank: Guest

Joined: 5/3/2019(UTC)
Posts: 11

Thanks: 4 times
Was thanked: 5 time(s) in 5 post(s)
Watched the video for the Magnet tool, tried it. I select the top face of box #2, identify that plane. Select the top face of box#1, select that top plane/face. It moved the box but puts box2 on top of box 1. I want it inside it.

I tried the move (translate) tool but it seems to move in one plane only. The box does not get positioned anywhere near the middle top edge. :/
File Attachment(s):
moveBox.vc3 (44kb) downloaded 5 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
thanks 1 user thanked shorton for this useful post.
specktech on 2/14/2022(UTC)
shorton  
#5 Posted : Wednesday, May 8, 2019 4:15:53 PM(UTC)
shorton

Rank: Guest

Joined: 5/3/2019(UTC)
Posts: 11

Thanks: 4 times
Was thanked: 5 time(s) in 5 post(s)
Part of my problem is I can't snap to the midpoint of the face. I thought I was, but it only worked in pure iso view (from menu). Well that just makes it look like its snapping to the face's center, I believe it is snapping to the rear vertical edges center not the face. So, I see no way to snap to the face. And it's the 2 faces I want to move. I do this kind of alignment move all the time in my other software (Microstation), their accudraw system, intelligent snaps and 3D movement tools are quite painless and intuitive. Not trying to criticize this one, I want to learn the workarounds so I can migrate. Microstation is jut too expensive for my needs.
Back to top
thanks 1 user thanked shorton for this useful post.
specktech on 2/14/2022(UTC)
rockyroad_us  
#6 Posted : Wednesday, May 8, 2019 4:46:28 PM(UTC)
rockyroad_us

Rank: Senior Member

Joined: 9/12/2009(UTC)
Posts: 608
Man
United States
Location: In my place

Was thanked: 59 time(s) in 51 post(s)
Looks like it only snaps to the normal of the surface since it is a solid cube and thus it puts it on the outside. Maybe not with surfaces.

Alternatively, just create another cube in the center of the cube, you can use the gripper using the option key and drag the yellow square of the gripper assuming you have uniform scaling on. when you drag it creates another cube dead center and you can shift it to any side while keeping workplane on. of course you would have to switch view depending on how you work with views.

FX 7-FXPro14-1650
MacPro 11.7.4
2x2.8GHz Quad Xeon 32GB
NVIDIA 4 K5000 4GB
Work
Back to top
WWW
thanks 1 user thanked rockyroad_us for this useful post.
specktech on 2/14/2022(UTC)
Art Smith  
#7 Posted : Wednesday, May 8, 2019 7:13:48 PM(UTC)
Art Smith

Rank: Senior Member

Joined: 1/16/2015(UTC)
Posts: 351

Thanks: 49 times
Was thanked: 43 time(s) in 30 post(s)
you might find "translate" and "rotate" a little more intuitive. I frequently add a "point" to the object being moved and then "group" the object and the point. the "point" makes "translate" and "rotate" a snap since you're in charge of where the "point" is added!! see collage below

Art
[email protected]
Art Smith attached the following image(s):
punch cad forum align boxes.jpg (28kb) downloaded 2 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
thanks 2 users thanked Art Smith for this useful post.
shorton on 5/9/2019(UTC), specktech on 2/14/2022(UTC)
billb2  
#8 Posted : Thursday, May 9, 2019 1:58:46 AM(UTC)
billb2

Rank: Guest

Joined: 1/4/2019(UTC)
Posts: 8

Was thanked: 1 time(s) in 1 post(s)
Originally Posted by: shorton Go to Quoted Post
Watched the video for the Magnet tool, tried it. I select the top face of box #2, identify that plane. Select the top face of box#1, select that top plane/face. It moved the box but puts box2 on top of box 1. I want it inside it.


The magnet tool is just a simple aligning operation. You can move the aligned cube afterwards, I would suggest using the align tool ->tops or whichever face you choose.

However, if you are trying to produce a hollow cube the shell tool is the way to go.
Bill Bedford

OSX 10.14.5

ViaCAD Pro 11 (1429)
Back to top
thanks 1 user thanked billb2 for this useful post.
specktech on 2/14/2022(UTC)
jdi000  
#9 Posted : Thursday, May 9, 2019 7:43:37 AM(UTC)
jdi000

Rank: Administration

Joined: 7/29/2007(UTC)
Posts: 1,862
United States

Thanks: 1 times
Was thanked: 87 time(s) in 81 post(s)
Originally Posted by: shorton Go to Quoted Post
I am trying to get a handle (no pun intended) on how to move a solid and align with another one in VC

In my example I have (2) cubes. #1 is a 3x3x3. #2 is a 1x1x1

I want to move the smaller cube #2 to where it's top face is on the same plane as the top of Cube #1, with #2 centered inside #2 in the X-Y directions.

I don't see how to snap to a face. In my old software I could snap to the face to be moved, then pick a move tool and snap to the face of the other cube.

What is the correct way to do this? Preferably without any construction lines.





Hello


You can use the translate tool and the logi cursor snaps.

Activate translate tool
Hover mouse over the (midpoint) of one edge top side of the #2 cube, then hover over another side (midpoint) and slide to the center of the cube and click when you have snaps showing intersection.
Go to cube 1 and repeat.

Regards

Jason

Edited by user Thursday, May 9, 2019 7:45:46 AM(UTC)  | Reason: Not specified

File Attachment(s):
pic1.png (624kb) downloaded 6 time(s).
pic2.png (626kb) downloaded 4 time(s).

You cannot view/download attachments. Try to login or register.
Windows 11, 10
Back to top
thanks 2 users thanked jdi000 for this useful post.
shorton on 5/9/2019(UTC), specktech on 2/14/2022(UTC)
shorton  
#10 Posted : Thursday, May 9, 2019 9:37:20 AM(UTC)
shorton

Rank: Guest

Joined: 5/3/2019(UTC)
Posts: 11

Thanks: 4 times
Was thanked: 5 time(s) in 5 post(s)
Originally Posted by: jdi000 Go to Quoted Post

Activate translate tool
Hover mouse over the (midpoint) of one edge top side of the #2 cube, then hover over another side (midpoint) and slide to the center of the cube and click when you have snaps showing intersection.
Go to cube 1 and repeat.


Jason: Perfect, THAT is what I was looking for. Thank you.
Back to top
thanks 1 user thanked shorton for this useful post.
specktech on 2/14/2022(UTC)
shorton  
#11 Posted : Thursday, May 9, 2019 9:42:59 AM(UTC)
shorton

Rank: Guest

Joined: 5/3/2019(UTC)
Posts: 11

Thanks: 4 times
Was thanked: 5 time(s) in 5 post(s)
Originally Posted by: billb2 Go to Quoted Post
The magnet tool is just a simple aligning operation. You can move the aligned cube afterwards, I would suggest using the align tool ->tops or whichever face you choose.


re "move cube afterwards" Option: In my old software I could constrain an axis. So for example if I used the magnet tool to locate my small box on top, then I wanted to move it down, I could activate a front view, then constrain X and Y and use a move(translate) tool to move in the Z direction only.

In ViaCAD, how/what is the best way to do such a move where I want to move an object on one axis only, z for example, and prevent movement in the other 2 directions (X-Y)?

Edited by user Thursday, May 9, 2019 9:48:00 AM(UTC)  | Reason: Clarity
Back to top
thanks 1 user thanked shorton for this useful post.
specktech on 2/14/2022(UTC)
horst.w  
#12 Posted : Thursday, May 9, 2019 12:32:04 PM(UTC)
horst.w

Rank: Senior Member

Joined: 12/21/2014(UTC)
Posts: 209
Germany

Thanks: 4 times
Was thanked: 26 time(s) in 22 post(s)
Therefore ViaCAD has a gipper. Only select the object and pull the z-axis-gripper-flash.


horst.w
GER
ViaCAD 9 Pro german + ViaCAD 10 Pro & PowerPack + ViaCAD 11, Win7Prof 64 Bit upgraded to Win 10 64 Bit
Back to top
thanks 2 users thanked horst.w for this useful post.
shorton on 5/9/2019(UTC), specktech on 2/14/2022(UTC)
Users browsing this topic
Guest (3)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF.NET 2.1.2 | YAF.NET © 2003-2024, Yet Another Forum.NET