logo
NOTICE:  This is the new PunchCAD forum. You should have received an email with your new password around August 27, 2014. If you did not, or would like it reset, simply use the Lost Password feature, and enter Answer as the security answer.
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
Make a hole with a custom shape
Options
Go to last post Go to first unread
Previous Topic Next Topic
PianoTondo  
#1 Posted : Tuesday, January 29, 2019 7:41:15 AM(UTC)
PianoTondo

Rank: Guest

Joined: 1/25/2019(UTC)
Posts: 33

Was thanked: 3 time(s) in 2 post(s)
Hi Everyone,

here I am again :D
This time I have a custom 2d shape made with curves that I want to place on a face of my solid and make a hole with it ( part to part ).

I have the following problem:

1) I don't understand how to move this 2d shape precisely on the face
2) I tried to make the hole with the function "push and pull" and/or "cutout solid" but when I'm in position I'm not able to select the 2d shape and pull: the selection goes always on the below face or on the solid form.

I know it seems to be an easy operation, but I can't achieve it.


Thanks for everything!
Back to top
L. Banasky  
#2 Posted : Tuesday, January 29, 2019 9:22:47 AM(UTC)
L. Banasky

Rank: Senior Member

Joined: 2/16/2007(UTC)
Posts: 601

Thanks: 153 times
Was thanked: 149 time(s) in 102 post(s)
I'm sure there are easier ways, but 'EXTRUDE' your 2d shape.
Place it on the surface, move desired depth, and 'SUBTRACT'
The shape can be longer, and you can 'TRIM SOLID'.
Larry
L. Banasky attached the following image(s):
Custom Hole.jpg (52kb) downloaded 6 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
murray  
#3 Posted : Tuesday, January 29, 2019 6:31:50 PM(UTC)
murray

Rank: Senior Member

Joined: 9/24/2014(UTC)
Posts: 373
Australia

Thanks: 8 times
Was thanked: 104 time(s) in 85 post(s)
The cutout solid and protrusion solid tools make subtractive and additive custom shapes that are associated with a part, like holes and bosses but with any practical shape, not only circular. You can also add features like chamfers, blends and subsequent shelling that respect the profile and part history.
Back to top
PianoTondo  
#4 Posted : Wednesday, January 30, 2019 2:15:41 AM(UTC)
PianoTondo

Rank: Guest

Joined: 1/25/2019(UTC)
Posts: 33

Was thanked: 3 time(s) in 2 post(s)
Thanks! I'm going to try it now and I'll let you know. :D
Back to top
PianoTondo  
#5 Posted : Wednesday, January 30, 2019 4:53:35 AM(UTC)
PianoTondo

Rank: Guest

Joined: 1/25/2019(UTC)
Posts: 33

Was thanked: 3 time(s) in 2 post(s)
Ok perfect. I used the "extrude then substract" solution. And it worked fine. Thanks!

But let's consider a similar topic: I'd like to snap the shape on a face, then precisely intrude the shape in the solid for some millimiters.
I'd like to find a solution to this in order to understand some command.

1)First of all: I really can't snap a 2d shape or other things to a face. They are vertically aligned but I can't "lay" the figure on the face. How can I achieve this?
I thinks it's a really important function
2)Then if I understood well I have to use push/pull function, click on the path of the 2d shape and click in the direction I want to intrude ( without clicking shift or other buttons ).
Then if the solid is on the way, ViaCAD will make the intrusion ? Correct ?


Sorry if I insist but I'd love to understand how it works :D



Thanks as usual, for your precious and appreciated help !
Back to top
rokoko  
#6 Posted : Wednesday, January 30, 2019 6:29:31 AM(UTC)
rokoko

Rank: Senior Member

Joined: 9/28/2013(UTC)
Posts: 345

Thanks: 4 times
Was thanked: 57 time(s) in 45 post(s)
move (translate) your 2d shape with your mouse onto the face. do as follows:

see figure 1: the shape and the solid in front view

see figure 2: the shape and the solid in trimetric view

see figure 3: now fence select the shape. set snap settings as shown. grab the shape at a point on the lines, hold down "z" key to limit the translation to the "z" axis, move with mouse onto the face and it will snap to that face

see figure 4: the result
rokoko attached the following image(s):
figure1.png (7kb) downloaded 2 time(s).
figure2.png (32kb) downloaded 0 time(s).
figure3.png (54kb) downloaded 0 time(s).
figure4.png (53kb) downloaded 1 time(s).

You cannot view/download attachments. Try to login or register.
viacad pro 10 powerpackpro, viacad pro 9 german, mac
Back to top
PianoTondo  
#7 Posted : Wednesday, January 30, 2019 7:38:03 AM(UTC)
PianoTondo

Rank: Guest

Joined: 1/25/2019(UTC)
Posts: 33

Was thanked: 3 time(s) in 2 post(s)
Yeah! Superthanks!
I made it. Very nice.

I used the CutOut Solid function after I set up everything as shown.

Thank you very much again, very useful ^_^
Back to top
Tim Olson  
#8 Posted : Wednesday, February 20, 2019 3:28:07 PM(UTC)
Tim Olson

Rank: Senior Member

Joined: 2/2/2007(UTC)
Posts: 5,447
United States

Was thanked: 502 time(s) in 353 post(s)
>>This time I have a custom 2d shape made with curves that I want to place on a face of my solid and make a hole with it ( part to part ).

The Magnet tool is also a great way to place a 2D shape onto a planar face of a solid.


http://www.csi-concepts.com/Demo/videos/magnet.mp4



Tim
Tim Olson
IMSI Design/Encore
Back to top
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF.NET 2.1.2 | YAF.NET © 2003-2024, Yet Another Forum.NET