logo
NOTICE:  This is the new PunchCAD forum. You should have received an email with your new password around August 27, 2014. If you did not, or would like it reset, simply use the Lost Password feature, and enter Answer as the security answer.
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
Sweep curve along 2 guides - sweep fails to respect curve
Options
Go to last post Go to first unread
Previous Topic Next Topic
Jolyon  
#1 Posted : Friday, November 9, 2018 5:34:26 AM(UTC)
Jolyon

Rank: Guest

Joined: 9/27/2017(UTC)
Posts: 231

Thanks: 1 times
Was thanked: 22 time(s) in 19 post(s)
Sweep curve along 2 guides - sweep fails to respect drive curve

This has been like this forever - in fact, perhaps there's logic to say it shouldn't work anyway

Be great if someone could look at it and say why the driven curve is not respected

... and can anything be done about it

Thank you !

Jol
File Attachment(s):
sweep 2 guide issue.sfx (16kb) downloaded 13 time(s).
Jolyon attached the following image(s):
2 rail sweep fail.jpg (45kb) downloaded 10 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
thanks 1 user thanked Jolyon for this useful post.
Art Smith on 11/9/2018(UTC)
L. Banasky  
#2 Posted : Friday, November 9, 2018 8:30:21 AM(UTC)
L. Banasky

Rank: Senior Member

Joined: 2/16/2007(UTC)
Posts: 601

Thanks: 152 times
Was thanked: 149 time(s) in 102 post(s)
Hi Jol,
Don't know if this is what you want, seems to work on the PC.
Larry
File Attachment(s):
sweep 2 guide issue2.sfx (107kb) downloaded 5 time(s).
L. Banasky attached the following image(s):
sweep 2 guide issue2.jpg (116kb) downloaded 8 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
Jolyon  
#3 Posted : Friday, November 9, 2018 11:56:34 AM(UTC)
Jolyon

Rank: Guest

Joined: 9/27/2017(UTC)
Posts: 231

Thanks: 1 times
Was thanked: 22 time(s) in 19 post(s)
Many thanks Larry !

- Could somebody with a Mac have a look for me

... perhaps this is a Mac / PC thing !?

Or perhaps I'm doing some thing daft ?

Thanks again Larry !

Jol
Back to top
Jolyon  
#4 Posted : Saturday, November 10, 2018 4:37:01 PM(UTC)
Jolyon

Rank: Guest

Joined: 9/27/2017(UTC)
Posts: 231

Thanks: 1 times
Was thanked: 22 time(s) in 19 post(s)
Anyone,

Bueller ?
Back to top
mitchb  
#5 Posted : Saturday, November 10, 2018 9:57:56 PM(UTC)
mitchb

Rank: Senior Member

Joined: 4/29/2015(UTC)
Posts: 73

Thanks: 4 times
Was thanked: 65 time(s) in 33 post(s)
Modify your end slope so it's not so sharp.
mitchb attached the following image(s):
Screen Shot 1.png (113kb) downloaded 1 time(s).
Screen Shot 2.png (115kb) downloaded 2 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
Jolyon  
#6 Posted : Sunday, November 11, 2018 3:18:30 AM(UTC)
Jolyon

Rank: Guest

Joined: 9/27/2017(UTC)
Posts: 231

Thanks: 1 times
Was thanked: 22 time(s) in 19 post(s)
Hi MitchB

I've tried your suggestion - this just lessons the issue, but the issue remains

Perhaps you're on a PC - and this is a Mac issue ?

(I'm not really looking for a workaround. I'm looking to highlight longstanding issues so they can be rectified and not ignored)

I note that your solution looks wavy - I also had this issue in my experimentation

Perhaps if any of the devs go through these forum entries - they can look at that too

Thanks Mitch for your help

Jol
Back to top
Jolyon  
#7 Posted : Tuesday, December 4, 2018 2:57:33 AM(UTC)
Jolyon

Rank: Guest

Joined: 9/27/2017(UTC)
Posts: 231

Thanks: 1 times
Was thanked: 22 time(s) in 19 post(s)
tumbleweed
Back to top
rockyroad_us  
#8 Posted : Tuesday, December 4, 2018 1:05:48 PM(UTC)
rockyroad_us

Rank: Senior Member

Joined: 9/12/2009(UTC)
Posts: 608
Man
United States
Location: In my place

Was thanked: 59 time(s) in 51 post(s)
I'm on a mac. I can confirm the same result but only if I go from left to right when picking the curves to sweep. If you pick from right to left and maintain the height with the OPTION key held down, you get a better result with the 2 guide rail sweep. I know Larry attempted it with the guide sweep surface as a solution, which is not the same command and also gives sort of a kink in the surface when you zoom in.

In my CAD experience, it is better you go with four curves instead of three since you still need maintain tangency with whatever this is patching.
FX 7-FXPro14-1650
MacPro 11.7.4
2x2.8GHz Quad Xeon 32GB
NVIDIA 4 K5000 4GB
Work
Back to top
WWW
UGMENTALCASE  
#9 Posted : Tuesday, December 4, 2018 1:37:50 PM(UTC)
UGMENTALCASE

Rank: Senior Member

Joined: 3/21/2017(UTC)
Posts: 952
Man
United Kingdom

Thanks: 46 times
Was thanked: 319 time(s) in 212 post(s)
I've just tried it in shark on a PC, and if I go right to left on the two curves it's almost on the lower sweeping curve. If I go left to right it's way off like the original image.

Tried it in V11 pro and it had a fit, and eventually gave the same results as shark although moving the model around was very jittery after this.
Guided skin surface works ok, but there is a blip in the top of the longer edge for whatever reason...

Edited by user Tuesday, December 4, 2018 1:46:58 PM(UTC)  | Reason: More detail added

File Attachment(s):
sweep 2 guide issue.slt (74kb) downloaded 0 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
rockyroad_us  
#10 Posted : Tuesday, December 4, 2018 2:06:22 PM(UTC)
rockyroad_us

Rank: Senior Member

Joined: 9/12/2009(UTC)
Posts: 608
Man
United States
Location: In my place

Was thanked: 59 time(s) in 51 post(s)
Better to go with four curves and do a net surface. Who knows what the calculations might be doing. You suspect it will behave correctly intuitively but the math behind it might not allow it thus you get a space or way off.

Maybe if someone has another spatial engine in another CAD and try out the curves to confirm this.. My Rhino is too old to try.
FX 7-FXPro14-1650
MacPro 11.7.4
2x2.8GHz Quad Xeon 32GB
NVIDIA 4 K5000 4GB
Work
Back to top
WWW
UGMENTALCASE  
#11 Posted : Tuesday, December 4, 2018 2:37:18 PM(UTC)
UGMENTALCASE

Rank: Senior Member

Joined: 3/21/2017(UTC)
Posts: 952
Man
United Kingdom

Thanks: 46 times
Was thanked: 319 time(s) in 212 post(s)
I can stick them through Catia tomorrow but I've done something similar, and got different results. Visually I preferred the Shark result, only because I knew what the resulting surface should have looked like. Although the Catia surface appeared to go away from what I wanted.
Back to top
UGMENTALCASE  
#12 Posted : Wednesday, December 5, 2018 12:09:25 AM(UTC)
UGMENTALCASE

Rank: Senior Member

Joined: 3/21/2017(UTC)
Posts: 952
Man
United Kingdom

Thanks: 46 times
Was thanked: 319 time(s) in 212 post(s)
Straight off the commands Catia can't figure it out. NX however produces a nice surface. It's almost the same as what Shark can do, only the one in NX grips the bottom edge better.
File Attachment(s):
NX 9.zip (1,852kb) downloaded 5 time(s).
NX 9.igs (315kb) downloaded 11 time(s).
NX 9.txt (3kb) downloaded 6 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
rockyroad_us  
#13 Posted : Wednesday, December 5, 2018 9:11:26 AM(UTC)
rockyroad_us

Rank: Senior Member

Joined: 9/12/2009(UTC)
Posts: 608
Man
United States
Location: In my place

Was thanked: 59 time(s) in 51 post(s)
Originally Posted by: UGMENTALCASE Go to Quoted Post
Straight off the commands Catia can't figure it out. NX however produces a nice surface. It's almost the same as what Shark can do, only the one in NX grips the bottom edge better.


You would think that it will be identical assuming they both use the same engine. I don't know much about NX but it does sound like a higher end CAD software. I guess you get what you paid for.

Maybe it is time to start looking around since Punch is going in a different direction and our voices are not heard.
FX 7-FXPro14-1650
MacPro 11.7.4
2x2.8GHz Quad Xeon 32GB
NVIDIA 4 K5000 4GB
Work
Back to top
WWW
annabel parker  
#14 Posted : Monday, December 24, 2018 7:08:31 AM(UTC)
annabel parker

Rank: Guest

Joined: 12/24/2018(UTC)
Posts: 1
It was really good to read this post and it Dyson Coupons helped me a lot thank for such a useful post keep posting
Back to top
srafiq  
#15 Posted : Wednesday, December 26, 2018 6:09:26 AM(UTC)
srafiq

Rank: Guest

Joined: 10/16/2018(UTC)
Posts: 7
Man
Pakistan
Originally Posted by: Jolyon Go to Quoted Post
Sweep curve along 2 guides - sweep fails to respect drive curve

This has been like this forever - in fact, perhaps there's logic to say it shouldn't work anyway

Be great if someone could look at it and say why the driven curve is not respected

... and can anything be done about it

Thank you !

Jol


The issue has been reported to the development team for a fix.
I'll let you know once it's fixed.

Shaheryar

Edited by user Wednesday, December 26, 2018 6:10:30 AM(UTC)  | Reason: Not specified

Regards,
Shaheryar Rafiq
QA & Support Engineer
Back to top
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF.NET 2.1.2 | YAF.NET © 2003-2024, Yet Another Forum.NET