logo
NOTICE:  This is the new PunchCAD forum. You should have received an email with your new password around August 27, 2014. If you did not, or would like it reset, simply use the Lost Password feature, and enter Answer as the security answer.
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
Bending help please
Options
Go to last post Go to first unread
Previous Topic Next Topic
UGMENTALCASE  
#1 Posted : Wednesday, September 5, 2018 5:15:50 AM(UTC)
UGMENTALCASE

Rank: Senior Member

Joined: 3/21/2017(UTC)
Posts: 952
Man
United Kingdom

Thanks: 46 times
Was thanked: 319 time(s) in 212 post(s)
Hi All,

I'm trying to bend this wire rope model around an arc. I've tried numerous different ways but can't seem to bottom it. It's as you would expect the end of a wire rope to look as it bends back on itself to be secured. Any help would be great!
I've only put one spiral in as the file size was quite big, so if you just polar duplicate say 3 of them, you should get a pattern of a few which is ready to bend

Cheers

Edited by user Wednesday, September 5, 2018 5:29:00 AM(UTC)  | Reason: Not specified

File Attachment(s):
wire ropes.vcp (1,847kb) downloaded 8 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
L. Banasky  
#2 Posted : Wednesday, September 5, 2018 6:11:59 AM(UTC)
L. Banasky

Rank: Senior Member

Joined: 2/16/2007(UTC)
Posts: 602

Thanks: 156 times
Was thanked: 150 time(s) in 103 post(s)
I rotated and copied about the Z axis, if you increase the diameter of the cable slightly 4 rotations
should do it. I did more than was needed and trimmed them.
Just an idea, hope it helps.
Larry

Edited by user Wednesday, September 5, 2018 6:15:35 AM(UTC)  | Reason: Not specified

L. Banasky attached the following image(s):
Cable.jpg (49kb) downloaded 0 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
UGMENTALCASE  
#3 Posted : Wednesday, September 5, 2018 6:15:01 AM(UTC)
UGMENTALCASE

Rank: Senior Member

Joined: 3/21/2017(UTC)
Posts: 952
Man
United Kingdom

Thanks: 46 times
Was thanked: 319 time(s) in 212 post(s)
Hi,

Cheers, I can do that one, it's bending the other way. Check this link. it's the loop bit I'm trying to make.

Sorry wasn't very clear in my waffle

https://uk.rs-online.com...yvD_BwE&gclsrc=aw.ds
Back to top
L. Banasky  
#4 Posted : Wednesday, September 5, 2018 9:43:32 AM(UTC)
L. Banasky

Rank: Senior Member

Joined: 2/16/2007(UTC)
Posts: 602

Thanks: 156 times
Was thanked: 150 time(s) in 103 post(s)
Curve Bend Tool should get you on the right track. Will probably
take some experimenting.
Larry
L. Banasky attached the following image(s):
Curve Bend.jpg (58kb) downloaded 4 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
UGMENTALCASE  
#5 Posted : Wednesday, September 5, 2018 9:53:00 AM(UTC)
UGMENTALCASE

Rank: Senior Member

Joined: 3/21/2017(UTC)
Posts: 952
Man
United Kingdom

Thanks: 46 times
Was thanked: 319 time(s) in 212 post(s)
Looking good, it's the height axis and all this I couldn't get my head around
Back to top
UGMENTALCASE  
#6 Posted : Wednesday, September 5, 2018 3:32:49 PM(UTC)
UGMENTALCASE

Rank: Senior Member

Joined: 3/21/2017(UTC)
Posts: 952
Man
United Kingdom

Thanks: 46 times
Was thanked: 319 time(s) in 212 post(s)
Got it, bending everything to everything now!

Cheers for the help
Back to top
Jolyon  
#7 Posted : Thursday, September 6, 2018 12:33:14 AM(UTC)
Jolyon

Rank: Guest

Joined: 9/27/2017(UTC)
Posts: 231

Thanks: 1 times
Was thanked: 22 time(s) in 19 post(s)
... bending like beckham !
Back to top
UGMENTALCASE  
#8 Posted : Thursday, September 6, 2018 4:20:00 AM(UTC)
UGMENTALCASE

Rank: Senior Member

Joined: 3/21/2017(UTC)
Posts: 952
Man
United Kingdom

Thanks: 46 times
Was thanked: 319 time(s) in 212 post(s)
Better bending than him!!! :-)

It's just confusing when it asks for heights and stuff. So I did a little practice piece. A long round bar, and a curve/arc. Pick the solid, then pick the curve you want to bend it to the shape of.

The pick end points on long round bar (start centre point, end centre point), then pick end points of arc (start point of arc, end point of arc), and hey presto! I was thinking the heights where, in my case, the diameter of the bar or something, but after some fiddling I figured it out.
Back to top
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF.NET 2.1.2 | YAF.NET © 2003-2024, Yet Another Forum.NET