logo
NOTICE:  This is the new PunchCAD forum. You should have received an email with your new password around August 27, 2014. If you did not, or would like it reset, simply use the Lost Password feature, and enter Answer as the security answer.
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
Line Segment woes - SharkCAD 10
Options
Go to last post Go to first unread
Previous Topic Next Topic
flatpack  
#1 Posted : Monday, August 27, 2018 2:43:43 PM(UTC)
flatpack

Rank: Senior Member

Joined: 9/29/2014(UTC)
Posts: 269

Thanks: 103 times
Was thanked: 18 time(s) in 14 post(s)
Hello there.. could someone pls take a quick look at the attached Sharkcad 10 file.

All it is is an extruded rectangle with a rectangle hole punched out of it. The rectangle cutout has a blended edge on all four corners.

I tried using Constant Blend Radial and Constant Blend Elliptical.

BUT.. when I make a draw view out of it, AND use PRECISE CURVES, the radiused edges are shown not as one smooth curve, but TWO.

How can i make the draw view show one smooth curve as it ought to be.

Additional Comments:
Circles are a full measurable circle.

Radius is made up from two arcs.

Ideally the radius rectangle box should be selectable as one polyline.


Please help.
File Attachment(s):
radiused corners are split.slt (89kb) downloaded 4 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
L. Banasky  
#2 Posted : Monday, August 27, 2018 5:04:03 PM(UTC)
L. Banasky

Rank: Senior Member

Joined: 2/16/2007(UTC)
Posts: 602

Thanks: 153 times
Was thanked: 150 time(s) in 103 post(s)
Just try using the Fillet Two Lines tool.
Seems to work on the rectangle that I copied.
Larry
File Attachment(s):
radiused corners are split2.sfx (65kb) downloaded 0 time(s).
L. Banasky attached the following image(s):
Fillet Two Lines.jpg (67kb) downloaded 1 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
thanks 1 user thanked L. Banasky for this useful post.
flatpack on 8/27/2018(UTC)
flatpack  
#3 Posted : Monday, August 27, 2018 6:46:31 PM(UTC)
flatpack

Rank: Senior Member

Joined: 9/29/2014(UTC)
Posts: 269

Thanks: 103 times
Was thanked: 18 time(s) in 14 post(s)
Originally Posted by: L. Banasky Go to Quoted Post
Just try using the Fillet Two Lines tool.
Seems to work on the rectangle that I copied.
Larry



Thanks Larry I tried this and it works; couple questions... are you suggesting its better that I fillet the rectangle corners BEFORE I cut-out the profile from my solid?

As in, is it more "correct modeling" to do so?



Furthermore, do you know if there is a way to edit the fillet radius afterward? It won't allow me to change the radius. Seems to only work with a Blend operation.

Edited by user Monday, August 27, 2018 6:55:05 PM(UTC)  | Reason: Not specified
Back to top
L. Banasky  
#4 Posted : Tuesday, August 28, 2018 6:26:31 AM(UTC)
L. Banasky

Rank: Senior Member

Joined: 2/16/2007(UTC)
Posts: 602

Thanks: 153 times
Was thanked: 150 time(s) in 103 post(s)
The file you provided was 2D. If creating 3D use the Blend Tool after Extruding,
and I think you can edit the Blend.
If using the outline to cut out part of a solid, someone else might be able to
help, I haven't tried to do that yet.
Larry
Back to top
flatpack  
#5 Posted : Tuesday, August 28, 2018 7:39:17 AM(UTC)
flatpack

Rank: Senior Member

Joined: 9/29/2014(UTC)
Posts: 269

Thanks: 103 times
Was thanked: 18 time(s) in 14 post(s)
Originally Posted by: L. Banasky Go to Quoted Post
The file you provided was 2D. If creating 3D use the Blend Tool after Extruding,
and I think you can edit the Blend.
If using the outline to cut out part of a solid, someone else might be able to
help, I haven't tried to do that yet.
Larry




Sorry I think I turned off the layers that had 3d. They should be on there still.

The only way I can modify with the 2d profile is to just delete the radiused corners and re-fillet. So there is indeed a workaround! Easy enough.

Edited by user Tuesday, August 28, 2018 7:40:01 AM(UTC)  | Reason: Not specified
Back to top
L. Banasky  
#6 Posted : Tuesday, August 28, 2018 9:17:44 AM(UTC)
L. Banasky

Rank: Senior Member

Joined: 2/16/2007(UTC)
Posts: 602

Thanks: 153 times
Was thanked: 150 time(s) in 103 post(s)
The Deep Select Tool will allow you to select each radius and edit it.
Larry
File Attachment(s):
radiused corners are split3.sfx (71kb) downloaded 1 time(s).
L. Banasky attached the following image(s):
Select Deep.jpg (50kb) downloaded 1 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
Users browsing this topic
Guest (2)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF.NET 2.1.2 | YAF.NET © 2003-2024, Yet Another Forum.NET