logo
NOTICE:  This is the new PunchCAD forum. You should have received an email with your new password around August 27, 2014. If you did not, or would like it reset, simply use the Lost Password feature, and enter Answer as the security answer.
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
Drawing large radius in short distance
Options
Go to last post Go to first unread
Previous Topic Next Topic
armerrell  
#1 Posted : Saturday, June 3, 2017 10:41:46 AM(UTC)
armerrell

Rank: Guest

Joined: 6/3/2017(UTC)
Posts: 3

Thanks: 3 times
I am new here, I have Viacad 10 Pro and learning to use it. I am trying to draw a 20 foot radius between two points which are 12 inches apart. I am not having any luck at doing this, can someone give me some pointers? I am making a jig that will be used to cut this radius into a piece of mdf board to be used in building radiused tops and backs for Guitars and Ukuleles. Any help in drawing this radius would be appreciated.
allen
Back to top
L. Banasky  
#2 Posted : Saturday, June 3, 2017 11:57:10 AM(UTC)
L. Banasky

Rank: Senior Member

Joined: 2/16/2007(UTC)
Posts: 602

Thanks: 156 times
Was thanked: 150 time(s) in 103 post(s)
Probably other ways to do it, but draw a 480" circle, draw a line from the center to
the quadrant, offset the line 6" on each side and trim.
Larry
L. Banasky attached the following image(s):
Radius.jpg (19kb) downloaded 15 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
thanks 1 user thanked L. Banasky for this useful post.
armerrell on 6/4/2017(UTC)
rokoko  
#3 Posted : Saturday, June 3, 2017 1:03:56 PM(UTC)
rokoko

Rank: Senior Member

Joined: 9/28/2013(UTC)
Posts: 345

Thanks: 4 times
Was thanked: 57 time(s) in 45 post(s)
you can do it with the "2-point arc" tool.

specify arc start point and endpoint, then set the arc center far away and try to match 240 in the radius field (zoom in)

Edited by user Saturday, June 3, 2017 1:12:02 PM(UTC)  | Reason: Not specified

rokoko attached the following image(s):
twopointarc.png (45kb) downloaded 8 time(s).

You cannot view/download attachments. Try to login or register.
viacad pro 10 powerpackpro, viacad pro 9 german, mac
Back to top
thanks 1 user thanked rokoko for this useful post.
armerrell on 6/4/2017(UTC)
armerrell  
#4 Posted : Sunday, June 4, 2017 7:08:19 AM(UTC)
armerrell

Rank: Guest

Joined: 6/3/2017(UTC)
Posts: 3

Thanks: 3 times
Thanks guys, both of these methods worked very well for me.I was thinking their was a possible way of just setting two points at a given distance and putting the radius between them. This would be a neat feature to have. I had to go into preferences and do a custom resolution to get a smooth usable radius, at first it was too segmented to be useful.
Thanks for the help, Larry & rokoko.
Back to top
murray  
#5 Posted : Monday, June 5, 2017 7:31:23 PM(UTC)
murray

Rank: Senior Member

Joined: 9/24/2014(UTC)
Posts: 373
Australia

Thanks: 8 times
Was thanked: 104 time(s) in 85 post(s)
Draw two 20" diameter circles centred on the two points, draw a two-point arc between the two points (the circles' centres), its centre at the intersection of the circles' circumference. Segmentation isn't relevant to snap features.

Edited by user Monday, June 5, 2017 7:33:42 PM(UTC)  | Reason: Not specified
Back to top
thanks 1 user thanked murray for this useful post.
armerrell on 6/6/2017(UTC)
armerrell  
#6 Posted : Tuesday, June 6, 2017 12:37:55 PM(UTC)
armerrell

Rank: Guest

Joined: 6/3/2017(UTC)
Posts: 3

Thanks: 3 times
Yes murray 20 inch circle causes no real segmentation problem but I am drawing a 20 foot circle and also 25 & 30 feet circles which did cause segmentation problems until I changed the curve angle to 1.0 and facet angle to 2.0 , now I have a very smooth curve with these large radii. With the factory settings in 10 Pro in the 24 inch cord of this large diameter the line had too much segmentation to be usable as a guide for the router to form a 20 foot diameter dish in a 14 inch square piece of 3/4 inch MDF board. All the information I have received from you guys has been helpful and appreciated.

allen
Back to top
Users browsing this topic
Guest (2)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF.NET 2.1.2 | YAF.NET © 2003-2024, Yet Another Forum.NET