logo
NOTICE:  This is the new PunchCAD forum. You should have received an email with your new password around August 27, 2014. If you did not, or would like it reset, simply use the Lost Password feature, and enter Answer as the security answer.
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Options
Go to last post Go to first unread
javg  
#1 Posted : Tuesday, October 27, 2015 8:22:10 AM(UTC)
javg

Rank: Guest

Joined: 10/27/2015(UTC)
Posts: 13

Thanks: 1 times
Having put the model in the "Model to Sheet" feature, all circles, lines etc. in the drawviews are represented by samll straight lines.
This makes it very difficult to using snaps like EndPoint, Centre, Midpoint etc.
Although the dimension options recognize a circle (represented bij very much small straight line-pieces.
But the option "Put centre-mark" does not work. Also "Flat-ing" the vie does not help.
Is the an annoying habbit of ViaCAD or is there an option to avoid this?
Javg
jdi000  
#2 Posted : Tuesday, October 27, 2015 11:00:17 AM(UTC)
jdi000

Rank: Administration

Joined: 7/29/2007(UTC)
Posts: 1,862
United States

Thanks: 1 times
Was thanked: 87 time(s) in 81 post(s)
Originally Posted by: javg Go to Quoted Post
Having put the model in the "Model to Sheet" feature, all circles, lines etc. in the drawviews are represented by samll straight lines.
This makes it very difficult to using snaps like EndPoint, Centre, Midpoint etc.
Although the dimension options recognize a circle (represented bij very much small straight line-pieces.
But the option "Put centre-mark" does not work. Also "Flat-ing" the vie does not help.


Hi Javg

ViaCAD creates draw views with polylines not precise curves. If you select the whole circle or curve it will allow the centermark to be placed.

Regards

Jason
Windows 11, 10
javg  
#3 Posted : Thursday, October 29, 2015 9:10:07 AM(UTC)
javg

Rank: Guest

Joined: 10/27/2015(UTC)
Posts: 13

Thanks: 1 times
Still I find it annoying.
It means that the 2D function is hard to be used.
I have tried to do the 2D work in for instance DoubleCAD XT V5.
By converting it to another format. That works up a point where the basic lines and circles etc. are still in the solid part.
But also then a lot dimensioning is akward.
Converting the sheets in flatt'nd does not help.
javg
Tim Olson  
#4 Posted : Thursday, October 29, 2015 11:11:36 AM(UTC)
Tim Olson

Rank: Senior Member

Joined: 2/2/2007(UTC)
Posts: 5,447
United States

Was thanked: 502 time(s) in 353 post(s)
Hi Javg

ViaCAD uses the PolyLine Method to create hidden line views in model to sheet where the results are line segments intersected with facetted bodies. I do some stuff where it trys to find the actual edge that created the line segment in some cases for dimensioning arcs/circles.

Shark LT and Shark FX add the Precise Curves Method to get highly accurate visible curves for 2D drawings. Encore licenses this technology from the CATIA drawing generation component. This trims arcs, circles, splines, lines etc to the NURB bodies providing a very precise hidden 2D drawing. However, the license fees required by Dassault prevents the technology from going into the ViaCAD products.

Tim

Edited by user Thursday, October 29, 2015 11:12:32 AM(UTC)  | Reason: Not specified

Tim Olson
IMSI Design/Encore
Parseval  
#5 Posted : Thursday, November 12, 2015 7:03:40 AM(UTC)
Parseval

Rank: Guest

Joined: 11/12/2015(UTC)
Posts: 2

Yes, you should select the circle/curve..
Users browsing this topic
Guest (3)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.