logo
NOTICE:  This is the new PunchCAD forum. You should have received an email with your new password around August 27, 2014. If you did not, or would like it reset, simply use the Lost Password feature, and enter Answer as the security answer.
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
Project curved surface - project onto only one surface
Options
Go to last post Go to first unread
Previous Topic Next Topic
thefro  
#1 Posted : Monday, October 26, 2015 6:50:21 AM(UTC)
thefro

Rank: Senior Member

Joined: 10/28/2014(UTC)
Posts: 92
Man
United Kingdom

Thanks: 7 times
Was thanked: 12 time(s) in 11 post(s)
Hi

I am wondering if there is a way of using the Project curved surface tool so it only projects onto one side of a solid

i have something different to project onto the opposing side when i use this tool it ends up on both sides.

i have watched the video on using this tool and it looks to be the best for what i want to do,

do i have to split the solid then project the line work onto the solid then join the two halve back together to achieve what i want to do.

i am creating a railway carriage where the windows doors etc differ on opposite sides and ends.

i have drawn the sides and ends and was going to then create the cutouts etc.

or would there be a better way of performing this

regards

Brian
Back to top
jdi000  
#2 Posted : Monday, October 26, 2015 7:57:39 AM(UTC)
jdi000

Rank: Administration

Joined: 7/29/2007(UTC)
Posts: 1,862
United States

Thanks: 1 times
Was thanked: 87 time(s) in 81 post(s)
Originally Posted by: thefro Go to Quoted Post
Hi

I am wondering if there is a way of using the Project curved surface tool so it only projects onto one side of a solid

i have something different to project onto the opposing side when i use this tool it ends up on both sides.

i have watched the video on using this tool and it looks to be the best for what i want to do,

do i have to split the solid then project the line work onto the solid then join the two halve back together to achieve what i want to do.

i am creating a railway carriage where the windows doors etc differ on opposite sides and ends.

i have drawn the sides and ends and was going to then create the cutouts etc.

or would there be a better way of performing this

regards

Brian




Brian

When the tool asks for 2 points to define the projection vector, pick the same point twice.

Regards

Jason
Windows 11, 10
Back to top
thefro  
#3 Posted : Monday, October 26, 2015 9:58:58 AM(UTC)
thefro

Rank: Senior Member

Joined: 10/28/2014(UTC)
Posts: 92
Man
United Kingdom

Thanks: 7 times
Was thanked: 12 time(s) in 11 post(s)
Hi jason

i tried that and the program fell over (quit unexpectedly) i have got the crash report. I am investigating this as it appeared to work using small amounts of objects so perhaps there is a problem object.

regards

Brian

Edited by user Monday, October 26, 2015 11:17:16 AM(UTC)  | Reason: Not specified
Back to top
mitchb  
#4 Posted : Monday, October 26, 2015 11:41:05 PM(UTC)
mitchb

Rank: Senior Member

Joined: 4/29/2015(UTC)
Posts: 73

Thanks: 4 times
Was thanked: 65 time(s) in 33 post(s)
Another way to do this is use the wireframe mode to see what you are doing and move the curves into the solid and project from inside the solid out to the surface.

Mitch
Back to top
Tim Olson  
#5 Posted : Tuesday, October 27, 2015 12:02:35 AM(UTC)
Tim Olson

Rank: Senior Member

Joined: 2/2/2007(UTC)
Posts: 5,447
United States

Was thanked: 502 time(s) in 353 post(s)
>> and project from inside the solid out to the surface.

Good one Mitch, I'm adding that one into the Tips book!!

ACIS by default projects into all faces of the body along the projection direction.

Tim
Tim Olson
IMSI Design/Encore
Back to top
thefro  
#6 Posted : Tuesday, October 27, 2015 2:19:37 AM(UTC)
thefro

Rank: Senior Member

Joined: 10/28/2014(UTC)
Posts: 92
Man
United Kingdom

Thanks: 7 times
Was thanked: 12 time(s) in 11 post(s)
Hi

Thank you Mitch and Tim i will give this a go today.

i thought their may have been a projection distance control setting i was missing

looking forward to the update to the tips book Tim

Regards

Brian
Back to top
thefro  
#7 Posted : Tuesday, October 27, 2015 4:43:05 PM(UTC)
thefro

Rank: Senior Member

Joined: 10/28/2014(UTC)
Posts: 92
Man
United Kingdom

Thanks: 7 times
Was thanked: 12 time(s) in 11 post(s)
Tim

thank you this worked for me but i only found it possible to do bits at a time and not the whole amount Would it be possible to add the shift to add or remove/selections to this tool maybe? at some time

many thanks

Brian

Edited by user Tuesday, October 27, 2015 4:45:28 PM(UTC)  | Reason: Not specified

thefro attached the following image(s):
Test 1.png (364kb) downloaded 12 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
jdi000  
#8 Posted : Tuesday, October 27, 2015 7:41:42 PM(UTC)
jdi000

Rank: Administration

Joined: 7/29/2007(UTC)
Posts: 1,862
United States

Thanks: 1 times
Was thanked: 87 time(s) in 81 post(s)
Originally Posted by: thefro Go to Quoted Post
Tim

thank you this worked for me but i only found it possible to do bits at a time and not the whole amount Would it be possible to add the shift to add or remove/selections to this tool maybe? at some time

many thanks

Brian


Brian

Did you try grouping all the lines together before using the project tool?

Regards

Jason
Windows 11, 10
Back to top
thefro  
#9 Posted : Wednesday, October 28, 2015 5:28:39 AM(UTC)
thefro

Rank: Senior Member

Joined: 10/28/2014(UTC)
Posts: 92
Man
United Kingdom

Thanks: 7 times
Was thanked: 12 time(s) in 11 post(s)
Jason

I had grouped them together in smaller groups of individual windows. now I have grouped them together as a single group and projected onto the surface and all this worked ok

only thing i wish for is having Group and ungroups as options when selecting and right clicking this would save time like the colour and layer options

Many thanks to you all for your help with my step learning curve (straight up) :-)

Regards

Brian
Back to top
jdi000  
#10 Posted : Wednesday, October 28, 2015 5:55:40 AM(UTC)
jdi000

Rank: Administration

Joined: 7/29/2007(UTC)
Posts: 1,862
United States

Thanks: 1 times
Was thanked: 87 time(s) in 81 post(s)
Originally Posted by: thefro Go to Quoted Post
is having Group and ungroups as options when selecting and right clicking this would save time like the colour and layer options



Brian

You could try to speed up by setting a shortcut key to group or ungroup commands. Rt click on the top of the main tool pallet and assign a shortcut key.
Once the group is created the rt click menu has the add or remove from group which saves alot of time.
Regards

Jason
Windows 11, 10
Back to top
thefro  
#11 Posted : Wednesday, October 28, 2015 10:41:54 AM(UTC)
thefro

Rank: Senior Member

Joined: 10/28/2014(UTC)
Posts: 92
Man
United Kingdom

Thanks: 7 times
Was thanked: 12 time(s) in 11 post(s)
Thank you Jason

done that.

think a useful thing in the future would be the ability to assign things like this to the right click menu perhaps in a future Version

Best Regards

Brian
Back to top
Users browsing this topic
Guest (3)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF.NET 2.1.2 | YAF.NET © 2003-2024, Yet Another Forum.NET