logo
NOTICE:  This is the new PunchCAD forum. You should have received an email with your new password around August 27, 2014. If you did not, or would like it reset, simply use the Lost Password feature, and enter Answer as the security answer.
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
Error - Not enough space for wall feature - Trying to insert a sliding door
Options
Go to last post Go to first unread
Previous Topic Next Topic
Pobble  
#1 Posted : Wednesday, July 15, 2015 4:18:35 AM(UTC)
Pobble

Rank: Guest

Joined: 7/14/2015(UTC)
Posts: 16

Thanks: 2 times
Hi

New to Viacad 9 and I am starting to plan a new layout for our shop.

I have the outside walls set up and I am not trying to insert sliding doors.

Seen the tutorial and tried it, but keep getting the error message 'Not enough space for wall feature'

I cannot work out what I am doing wrong. The wall is 45 metres long and the dorr is 8 metres along.

I have tried changing the thickness of the walls, but no joy.

What am I doing wrong?

Thanks

Brian
Back to top
jdi000  
#2 Posted : Wednesday, July 15, 2015 6:01:52 AM(UTC)
jdi000

Rank: Administration

Joined: 7/29/2007(UTC)
Posts: 1,862
United States

Thanks: 1 times
Was thanked: 87 time(s) in 81 post(s)
Originally Posted by: Pobble Go to Quoted Post
Hi

but keep getting the error message 'Not enough space for wall feature'

I cannot work out what I am doing wrong. The wall is 45 metres long and the dorr is 8 metres along.


Brian


Brian

Could you possibly have extra walls drawn on top of one another. That message is when the wall you picked to add the door is less than the door length. Or are you adding the door near another wall say in a corner and the swing 8m of the door would interfere with the wall?

Try drawing somewhere off to the side of your current drawing a new single wall 45 m and then try to add the door.

Regards
Jason
Windows 11, 10
Back to top
Pobble  
#3 Posted : Wednesday, July 15, 2015 8:10:52 AM(UTC)
Pobble

Rank: Guest

Joined: 7/14/2015(UTC)
Posts: 16

Thanks: 2 times
Thanks Jason.

I checked and do not have a wall on top of another.

Also made a new 45 metre wall and tried to insert all types of door, but still get the same error.

Regards
Brian
Back to top
jdi000  
#4 Posted : Wednesday, July 15, 2015 8:26:24 AM(UTC)
jdi000

Rank: Administration

Joined: 7/29/2007(UTC)
Posts: 1,862
United States

Thanks: 1 times
Was thanked: 87 time(s) in 81 post(s)

Brian

What build of the program are you running its in the help about (build #)? Which version of ViaCAD are you using? Can you post a screenshot of the wall setting you are using. Can you place a door if its smaller in size like 1 m?

Thanks

Jason
Windows 11, 10
Back to top
Pobble  
#5 Posted : Wednesday, July 15, 2015 9:01:51 AM(UTC)
Pobble

Rank: Guest

Joined: 7/14/2015(UTC)
Posts: 16

Thanks: 2 times
Thanks Jason

Build 1109 Viacad 3D 2D 9.

I tried a 1m door and the same error.

I have attached 2 screenshots of the wall and door settings.

What does the offset do when putting in a window?

Thanks
Brian
Pobble attached the following image(s):
Door.JPG (42kb) downloaded 9 time(s).
Wall.JPG (22kb) downloaded 6 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
jdi000  
#6 Posted : Wednesday, July 15, 2015 9:33:19 AM(UTC)
jdi000

Rank: Administration

Joined: 7/29/2007(UTC)
Posts: 1,862
United States

Thanks: 1 times
Was thanked: 87 time(s) in 81 post(s)
Brian

The offset is the distance the feature is placed from ref wall. See pics. When you are clicking on the wall location to add the door are you too close to the corner?

Regards
Jason

jdi000 attached the following image(s):
d1.PNG (17kb) downloaded 7 time(s).
d2.PNG (17kb) downloaded 7 time(s).

You cannot view/download attachments. Try to login or register.
Windows 11, 10
Back to top
Pobble  
#7 Posted : Wednesday, July 15, 2015 9:51:36 AM(UTC)
Pobble

Rank: Guest

Joined: 7/14/2015(UTC)
Posts: 16

Thanks: 2 times
Thanks Jason

I am in the middle of the wall and have also tried various places.

When I click on the position i want the door nothing happens. I then move further along and click aghain and the error comes up.

Looking at the tutorial video you set the width and click where you want it. A door is then put in and you can adjust it.

I cannot get this to happen.

Thanks
Brian
File Attachment(s):
Shop Layout1.vc3 (13kb) downloaded 10 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
jdi000  
#8 Posted : Wednesday, July 15, 2015 11:25:20 AM(UTC)
jdi000

Rank: Administration

Joined: 7/29/2007(UTC)
Posts: 1,862
United States

Thanks: 1 times
Was thanked: 87 time(s) in 81 post(s)
Brian

I added the door and reattached the file. I believe that this was fixed in a newer version, as I could not get it to work in version 1109 either. I export the file as V8 so try that

Regards
Jason

Edited by user Wednesday, July 15, 2015 11:28:43 AM(UTC)  | Reason: Not specified

File Attachment(s):
Shop%20Layout1_dooraddedV8.vcp (13kb) downloaded 7 time(s).

You cannot view/download attachments. Try to login or register.
Windows 11, 10
Back to top
Pobble  
#9 Posted : Wednesday, July 15, 2015 11:38:09 AM(UTC)
Pobble

Rank: Guest

Joined: 7/14/2015(UTC)
Posts: 16

Thanks: 2 times
Thanks Jason

As I still have the latest version and not V8 I still cannot get it to work on your file.

Regards
Brian
Back to top
Pobble  
#10 Posted : Wednesday, July 15, 2015 12:05:41 PM(UTC)
Pobble

Rank: Guest

Joined: 7/14/2015(UTC)
Posts: 16

Thanks: 2 times
Hi Jason

In your last post you mention that you thought this was fixed in a newer version, but when I check I am told I have the latest version.

How can I get a version that works?.

Thanks
Brian
Back to top
jdi000  
#11 Posted : Wednesday, July 15, 2015 12:17:42 PM(UTC)
jdi000

Rank: Administration

Joined: 7/29/2007(UTC)
Posts: 1,862
United States

Thanks: 1 times
Was thanked: 87 time(s) in 81 post(s)
Brian

Sorry I meant to say it works on the newer build of V9 (newer than 1109) see this post

http://forum.punchcad.co...sts&t=7270#post27118

You can contact support.

http://support.encore.co...frm.aspx?product_id=2820



Regards

Jason
Windows 11, 10
Back to top
thanks 1 user thanked jdi000 for this useful post.
Pobble on 7/15/2015(UTC)
Tim Olson  
#12 Posted : Wednesday, July 15, 2015 1:30:39 PM(UTC)
Tim Olson

Rank: Senior Member

Joined: 2/2/2007(UTC)
Posts: 5,447
United States

Was thanked: 502 time(s) in 353 post(s)
Hi Brian

I would suggest using the link Jason provided and ask Encore Technical Support for the "ViaCAD 2D3D 9 SP1 pre release" to solve some issues with inserting wall features.

Regards

Tim
Tim Olson
IMSI Design/Encore
Back to top
thanks 1 user thanked Tim Olson for this useful post.
Pobble on 7/15/2015(UTC)
Pobble  
#13 Posted : Wednesday, July 15, 2015 3:16:50 PM(UTC)
Pobble

Rank: Guest

Joined: 7/14/2015(UTC)
Posts: 16

Thanks: 2 times
Thanks Tim

I have already followed Jason's link to support and await their reply.

Regards
Brian
Back to top
Users browsing this topic
Guest (6)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF.NET 2.1.2 | YAF.NET © 2003-2024, Yet Another Forum.NET