logo
NOTICE:  This is the new PunchCAD forum. You should have received an email with your new password around August 27, 2014. If you did not, or would like it reset, simply use the Lost Password feature, and enter Answer as the security answer.
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Options
Go to last post Go to first unread
Jimbl  
#1 Posted : Wednesday, February 25, 2015 6:24:22 PM(UTC)
Jimbl

Rank: Member

Joined: 11/23/2014(UTC)
Posts: 40

Thanks: 7 times
Was thanked: 2 time(s) in 2 post(s)
I don't know whether i am missing something or not. I am using shark lt 2d drawing does not show up on model to sheet. The page is just blank

Thanks Jim
Tim Olson  
#2 Posted : Thursday, February 26, 2015 9:53:49 AM(UTC)
Tim Olson

Rank: Senior Member

Joined: 2/2/2007(UTC)
Posts: 5,447
United States

Was thanked: 502 time(s) in 353 post(s)

Hi Jim
If you have an example file that would be great.
Tim
Tim Olson
IMSI Design/Encore
Jimbl  
#3 Posted : Friday, February 27, 2015 7:37:39 AM(UTC)
Jimbl

Rank: Member

Joined: 11/23/2014(UTC)
Posts: 40

Thanks: 7 times
Was thanked: 2 time(s) in 2 post(s)
Tim Problem solved in the MtS box i unchecked ignore curves and the drawing appeared.

Thanks Jim
TCGliderguy  
#4 Posted : Monday, April 6, 2015 8:17:42 PM(UTC)
TCGliderguy

Rank: Junior Member

Joined: 12/25/2014(UTC)
Posts: 8

I'm trying to print a 2D drawing of some simple, curved parts (that we've already cut out of sheet aluminum, using the .DXF file export from Shark LT).

How do I transfer the drawing into the "Model to Sheet" interface... and get the dimensions to transfer over? All I am able to get is a small 2D drawing, with just a couple of the reference lines.... and a strange, distorted 3D view of the part, cocked at an angle.

And once in the "Model to Sheet" mode, how do you get back to the main drawing view?

Thanks for the help!

-Taylor
jdi000  
#5 Posted : Tuesday, April 7, 2015 5:14:42 AM(UTC)
jdi000

Rank: Administration

Joined: 7/29/2007(UTC)
Posts: 1,862
United States

Thanks: 1 times
Was thanked: 87 time(s) in 81 post(s)
Taylor

The model to sheet view just turns layers on and off. Goto concept explorer and turn the layers off for draw views and turn the ones on that have your geometry drawn.

Regards
Jason

Edited by user Tuesday, April 7, 2015 5:16:20 AM(UTC)  | Reason: Not specified

Windows 11, 10
jdi000  
#6 Posted : Tuesday, April 7, 2015 5:47:15 AM(UTC)
jdi000

Rank: Administration

Joined: 7/29/2007(UTC)
Posts: 1,862
United States

Thanks: 1 times
Was thanked: 87 time(s) in 81 post(s)
Originally Posted by: TCGliderguy Go to Quoted Post
I'm trying to print a 2D drawing of some simple, curved parts (that we've already cut out of sheet aluminum, using the .DXF file export from Shark LT).

How do I transfer the drawing into the "Model to Sheet" interface... and get the dimensions to transfer over? All I am able to get is a small 2D drawing, with just a couple of the reference lines.... and a strange, distorted 3D view of the part, cocked at an angle.

And once in the "Model to Sheet" mode, how do you get back to the main drawing view?

Thanks for the help!

-Taylor


Taylor

The draw views in model to sheet are using certain planes to view maybe your geometry is not on the planes corresponding to the draw views. In each model to sheet view you can select a view and then rt click on the little red box and change the view.

Regards
Jason
Windows 11, 10
TCGliderguy  
#7 Posted : Tuesday, April 7, 2015 10:38:25 AM(UTC)
TCGliderguy

Rank: Junior Member

Joined: 12/25/2014(UTC)
Posts: 8

Jason,

Thanks for the help. In the main (drawing) view.... using the Concept Explorer... I can turn the visibility of my drawing on and off, by clicking the "Layer 1" eyeball icon. I can turn the visibility of the dimensions on and off, by clicking the "Dimensions" eyeball icon. With both turned on (visible), I can draw a marquee around everything with the arrow tool, and all items turn red. Then I go to Draw > 3D to 2D Drawing > Model to Sheet. A 2D top view (which is what I want) appears on the left, and a 3D representation at an angle appear on the right. A message appears telling me to activate the views, using the Concept Explorer.... but no matter what I do, the dimensions will not show up. ?????????????????

Thanks!

-Taylor
jdi000  
#8 Posted : Tuesday, April 7, 2015 10:52:56 AM(UTC)
jdi000

Rank: Administration

Joined: 7/29/2007(UTC)
Posts: 1,862
United States

Thanks: 1 times
Was thanked: 87 time(s) in 81 post(s)
Taylor

When you first do model to sheet the dialog box that opens ignore curves must be unchecked.

Regards
Jason
Windows 11, 10
TCGliderguy  
#9 Posted : Tuesday, April 7, 2015 1:04:30 PM(UTC)
TCGliderguy

Rank: Junior Member

Joined: 12/25/2014(UTC)
Posts: 8

It is unchecked... the only one of those three check boxes that IS checked is "Use Draw Lines".....

jdi000  
#10 Posted : Tuesday, April 7, 2015 2:07:42 PM(UTC)
jdi000

Rank: Administration

Joined: 7/29/2007(UTC)
Posts: 1,862
United States

Thanks: 1 times
Was thanked: 87 time(s) in 81 post(s)
Taylor

Where were the dimensions added in the program or imported? Can you click on a dimension and post a screenshot of the attribute and data tabs in inspector? Are the dimensions drawn on the xy plane, can you click the 2d in the top of the toolbar and still see the dimensions in the view?

If you just need a title block you can load one from the symbols menu in the concept explorer under mechanical -drawing title bars. I would create a new layer and make active before importing the symbol.

Regards
Jason
Windows 11, 10
TCGliderguy  
#11 Posted : Tuesday, April 7, 2015 5:12:26 PM(UTC)
TCGliderguy

Rank: Junior Member

Joined: 12/25/2014(UTC)
Posts: 8

The dimensions were all added to the drawing... with the "Smart Dimension" tool. Clicking on the 2D or 3D interface button makes no difference. (All dimensions are visible either way).

I'm attaching a screen shot, with the data tab info, etc.....

Thanks!

-Taylor
TCGliderguy attached the following image(s):
Screen Shot 2015-04-07 at 5.08.44 PM.png (90kb) downloaded 9 time(s).

You cannot view/download attachments. Try to login or register.
jdi000  
#12 Posted : Wednesday, April 8, 2015 12:45:20 PM(UTC)
jdi000

Rank: Administration

Joined: 7/29/2007(UTC)
Posts: 1,862
United States

Thanks: 1 times
Was thanked: 87 time(s) in 81 post(s)
Taylor

Have you tried a different model to sheet layout in the drop down? Can you post a screen shot after the model to sheet is done ?

Regards
Jason
Windows 11, 10
Guest  
#13 Posted : Wednesday, April 8, 2015 3:23:35 PM(UTC)
Guest

Rank: Guest

Joined: 8/27/2014(UTC)
Posts: 394

Was thanked: 13 time(s) in 12 post(s)
Here's another attempt... this time to a Portrait (Vertical) A4 layout....

Same result... 2 drawings, but no dimensions....

-Taylor
Guest attached the following image(s):
Screen Shot 2015-04-08 at 3.21.54 PM.png (65kb) downloaded 7 time(s).

You cannot view/download attachments. Try to login or register.
Users browsing this topic
Guest (2)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.