logo
NOTICE:  This is the new PunchCAD forum. You should have received an email with your new password around August 27, 2014. If you did not, or would like it reset, simply use the Lost Password feature, and enter Answer as the security answer.
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
Two Simple Questions, I hope. (#3682)
Options
Go to last post Go to first unread
Previous Topic Next Topic
XL5  
#1 Posted : Saturday, March 5, 2011 12:36:42 AM(UTC)
XL5

Rank: Member

Joined: 2/4/2011(UTC)
Posts: 43
1)

I have a simple object that I have created. I am trying to position it precisely. I have turned ALL the snaps OFF. Yet, when I move the object, ViaCAD acts like I have the "Snap to Grid" check box set.

The object "clunks" from one grid space to the next (even though ALL snaps are OFF).

2)

If I draw a rectangle, with "grid" in the snaps menu turned on, I notice that my lines are sometimes a little to the left or to the right of the grid. Further, as I copy the rectangle, the copies will sometimes end up in the middle of a grid line.

I thought that if the grid snaps were on, lines "HAD" to be right on top of the grid lines.
Back to top
jdi000  
#2 Posted : Saturday, March 5, 2011 1:32:06 PM(UTC)
jdi000

Rank: Administration

Joined: 7/29/2007(UTC)
Posts: 1,862
United States

Thanks: 1 times
Was thanked: 87 time(s) in 81 post(s)
Originally Posted by: XL5 Go to Quoted Post
1)

I have a simple object that I have created. I am trying to position it precisely. I have turned ALL the snaps OFF. Yet, when I move the object, ViaCAD acts like I have the "Snap to Grid" check box set.

The object "clunks" from one grid space to the next (even though ALL snaps are OFF).


It looks like a bug if you enable snaps and just turn off grid its stops snapping to grid if you disable all snaps the grid snap stays active.



Originally Posted by: XL5 Go to Quoted Post
1)
2)

If I draw a rectangle, with "grid" in the snaps menu turned on, I notice that my lines are sometimes a little to the left or to the right of the grid. Further, as I copy the rectangle, the copies will sometimes end up in the middle of a grid line.

I thought that if the grid snaps were on, lines "HAD" to be right on top of the grid lines.



This might just be visually anomalies the lines are located at precise point but the display on screen might look slightly different based on thickness of grid lines vs line drawn thickness.

How are you copying the rectangles ctrl drag or translate tool? Whta size grid and how many subdivisions are you using?

Regards

Jason
jdi000 attached the following image(s):
snaps2.PNG (7kb) downloaded 0 time(s).

You cannot view/download attachments. Try to login or register.
Windows 11, 10
Back to top
XL5  
#3 Posted : Saturday, March 5, 2011 1:59:12 PM(UTC)
XL5

Rank: Member

Joined: 2/4/2011(UTC)
Posts: 43
[COLOR="Blue"]It looks like a bug if you enable snaps and just turn off grid its stops snapping to grid if you disable all snaps the grid snap stays active.[/COLOR]

I think it is a bug also. As a work-around I am forced to make the grid sub-spacing very small (64 x 64). Snap to grid is OFF.

[COLOR="Blue"]How are you copying the rectangles ctrl drag or translate tool? Whta size grid and how many subdivisions are you using?[/COLOR]

I copy by dragging. Grid is 1 x 1, the subdivisions I started with are 4 x 4, and 8 x 8. But I am now FORCED to constantly change the subdivisions in the preferences to 64 x 64. This really slows up my drawing.
Back to top
jdi000  
#4 Posted : Saturday, March 5, 2011 7:26:13 PM(UTC)
jdi000

Rank: Administration

Joined: 7/29/2007(UTC)
Posts: 1,862
United States

Thanks: 1 times
Was thanked: 87 time(s) in 81 post(s)
Hi


You could try setting a keyboard shortcut to toggle grid snap on /off, as needed rather than trying to change grid subdivisions.


If you disable only grid snap then you can precisely snap to other points.


Regards

Jason
Windows 11, 10
Back to top
XL5  
#5 Posted : Sunday, March 6, 2011 6:16:56 PM(UTC)
XL5

Rank: Member

Joined: 2/4/2011(UTC)
Posts: 43
Well, I'm extremely frustrated. I am drawing at about 1/10 the speed I could achieve with ViaCAD V5 3D. Almost EVERY line, and EVERY edit is a battle.

I am now using ViaCAD V6 2D (6.0.0). Sometimes I think this version of ViaCAD (V6 2D) maybe more buggy than the 3-D version.

Look how confusing it is to purchase.

http://www.amazon.com/s/ref=nb_...words=ViaCAD+mac&x=0&y=0

I actually purchased two copies, one for my Mac Pro, one for my MacBook.

With the version of my software ending with ".0.0" it's GOT to have bugs.

Should I buy something “more popular” hoping it's better tested, and just flush the money I have already spent?
Back to top
jdi000  
#6 Posted : Sunday, March 6, 2011 7:06:11 PM(UTC)
jdi000

Rank: Administration

Joined: 7/29/2007(UTC)
Posts: 1,862
United States

Thanks: 1 times
Was thanked: 87 time(s) in 81 post(s)
Hi


I would email tech support and review with them what is going maybe they can help some.

Email at: [email protected] or [email protected]

Telephone - (800) 365-4832
Mon. - Fri. (8AM - 5PM CST)


2nd if you have a v5 code maybe you could consider a upgrade to v7 ViaCAD 2d/3d
https://www.punchcad.com/p-6-viacad-2d3d.aspx#

Regards

Jason
Windows 11, 10
Back to top
XL5  
#7 Posted : Monday, March 7, 2011 12:42:22 AM(UTC)
XL5

Rank: Member

Joined: 2/4/2011(UTC)
Posts: 43
Thanks Jason,

I seem to be making some progress on some issues.

My number one annoyance is that when I turn snaps OFF objects still increment on the grid.

I will e-mail support. Thank you for helping me also!
Back to top
billbedford  
#8 Posted : Monday, March 7, 2011 2:48:55 AM(UTC)
billbedford

Rank: Senior Member

Joined: 2/19/2007(UTC)
Posts: 186
Why do you need to turn off all the snaps?
Back to top
XL5  
#9 Posted : Wednesday, March 9, 2011 5:13:38 PM(UTC)
XL5

Rank: Member

Joined: 2/4/2011(UTC)
Posts: 43
[COLOR="Blue"]It looks like a bug if you enable snaps and just turn off grid its stops snapping to grid if you disable all snaps the grid snap stays active.[/COLOR]


Punch software has confirmed that ViaCAD can sometimes NOT "unlock" from Snap to Grid. Apparently this bug exists in all versions of ViaCAD and Shark.

As a work-around, they showed me how to use "Nudge" to move objects small distances.
Back to top
Tim Olson  
#10 Posted : Thursday, March 10, 2011 10:19:53 AM(UTC)
Tim Olson

Rank: Senior Member

Joined: 2/2/2007(UTC)
Posts: 5,447
United States

Was thanked: 502 time(s) in 353 post(s)
>>It looks like a bug if you enable snaps and just turn off grid its stops >>snapping to grid if you disable all snaps the grid snap stays active.

This should be Fixed in 964.

Tim
Tim Olson
IMSI Design/Encore
Back to top
Users browsing this topic
Guest (6)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF.NET 2.1.2 | YAF.NET © 2003-2024, Yet Another Forum.NET