logo
NOTICE:  This is the new PunchCAD forum. You should have received an email with your new password around August 27, 2014. If you did not, or would like it reset, simply use the Lost Password feature, and enter Answer as the security answer.
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
Bend tool oddness (#2332)
Options
Go to last post Go to first unread
Previous Topic Next Topic
ttrw  
#1 Posted : Friday, May 22, 2009 8:03:51 AM(UTC)
ttrw

Rank: Senior Member

Joined: 4/1/2007(UTC)
Posts: 1,583

Was thanked: 2 time(s) in 2 post(s)
Punch Cad'ders,

I'm attempting to do some simple bends using the bend tool (as if it were sheet metal), but the piece I'm trying to bend goes all wrong! Any idea about why, or what I can do to fix it?

The first picture shows the direction I want the bend to go- which seems fine,

BUT then,

The second image then shows the part of the sheet behind also bending- and adding futher material- in an arc! is this right, or is it a bug of some sort?

Tom
ttrw attached the following image(s):
screenshot 19.png (21kb) downloaded 5 time(s).
screenshot 20.png (71kb) downloaded 5 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
blowlamp  
#2 Posted : Friday, May 22, 2009 8:23:37 AM(UTC)
blowlamp

Rank: Senior Member

Joined: 6/28/2008(UTC)
Posts: 648
Tom.
Because it's all the same part?

Martin.
Back to top
ttrw  
#3 Posted : Friday, May 22, 2009 8:55:46 AM(UTC)
ttrw

Rank: Senior Member

Joined: 4/1/2007(UTC)
Posts: 1,583

Was thanked: 2 time(s) in 2 post(s)
Err.... Illogical captain!

If it started life as a flat piece of sheet metal, why on earth would it do that? The first two bends worked as expected. Perhaps the model should have had constraints, to stop it from warping? But then would I get an error message?
Back to top
blowlamp  
#4 Posted : Friday, May 22, 2009 9:07:47 AM(UTC)
blowlamp

Rank: Senior Member

Joined: 6/28/2008(UTC)
Posts: 648
Not illogical at all Spock. If it is 1 piece of material, (as it seems to be) then how could it possible do anything other than it has done. It's bent the whole item, (in its current shape) in the plane you've selected, around the axis you've selected. Not what you wanted, I know, but quite logical nevertheless. :D

Martin.
Back to top
ttrw  
#5 Posted : Friday, May 22, 2009 10:34:21 AM(UTC)
ttrw

Rank: Senior Member

Joined: 4/1/2007(UTC)
Posts: 1,583

Was thanked: 2 time(s) in 2 post(s)
But Scotty, that makes absolutely no sense at all! :eek:

You can't just grow new material can you? If I were to set out a piece of paper, draw an outline to it then fold it, this wouldn't happen right? It's the bend tool! NOT the revolve extrude tool right?

Look- here's the profile it was 'bent' from; (see pic)

(the pink, vertical construction line was where the bend should have been. And, bending that part to the right, around this line, shouldn't affect the adjacent surface right? (the adjacent surface I need to bend the other way- towards the camera)

Essentially I am making a piece of sheet metal that holds a 2" x 2" table leg. Nick from SanFran reckons that Shark will do sheet metal-so I'm putting this to the test, and failing! :(
ttrw attached the following image(s):
screenshot 21.png (48kb) downloaded 5 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
ttrw  
#6 Posted : Friday, May 22, 2009 10:55:02 AM(UTC)
ttrw

Rank: Senior Member

Joined: 4/1/2007(UTC)
Posts: 1,583

Was thanked: 2 time(s) in 2 post(s)
Martin,

This is what I am trying to do.....

(this screenshot done in Solidworks!)
ttrw attached the following image(s):
screenshot 22.png (20kb) downloaded 5 time(s).
flattened!.png (10kb) downloaded 5 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
blowlamp  
#7 Posted : Friday, May 22, 2009 11:14:28 AM(UTC)
blowlamp

Rank: Senior Member

Joined: 6/28/2008(UTC)
Posts: 648
Tom.
I've done this, in ViaCAD.

Martin.
blowlamp attached the following image(s):
bend.JPG (103kb) downloaded 6 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
ZeroLengthCurve  
#8 Posted : Friday, May 22, 2009 11:24:30 AM(UTC)
ZeroLengthCurve

Rank: Senior Member

Joined: 5/15/2008(UTC)
Posts: 1,001

Thanks: 33 times
Was thanked: 47 time(s) in 30 post(s)
My first thought might be to draw two bend axes through where the folds are to be, like in the yellow drawing. But, i'm curious. Now, i'm going to try that in VC Pro 6 and see what happens....
Back to top
blowlamp  
#9 Posted : Friday, May 22, 2009 11:37:05 AM(UTC)
blowlamp

Rank: Senior Member

Joined: 6/28/2008(UTC)
Posts: 648
Much seems to depend on which end of the axis line you click first, and also if you press Ctrl to flip the bend, as to where the radius is placed on the item.

Martin.
Back to top
ttrw  
#10 Posted : Friday, May 22, 2009 5:24:15 PM(UTC)
ttrw

Rank: Senior Member

Joined: 4/1/2007(UTC)
Posts: 1,583

Was thanked: 2 time(s) in 2 post(s)
I'm away from my computer at the moment, so I can't verify this, but from what I remember, there is no ctrl key flip option on the Mac version. The flip depends on what side of the solid the construction line is placed. I haven't experimented with which end of the line comes first, but this gives me something to look forward to when I return home (typing on iPhone here!).

What I would give just to have those tools for sheet metal in Shark, that are in Solidworks- but thanks Martin (and Nick too, via various PM's). It's nice to know that something is doable- if a little complicated!
Back to top
zumer  
#11 Posted : Saturday, May 23, 2009 3:13:10 AM(UTC)
zumer

Rank: Senior Member

Joined: 11/4/2007(UTC)
Posts: 515

Was thanked: 1 time(s) in 1 post(s)
I thought varying the order of creation might improve things, but it's way too inconsistent. VC wouldn't even bend both ears of the same part for me, and there's no sane way to bend up the other using the same axis. I tried the same things in the Shark demo, and things were marginally better, ie at least both ears bent! In my view, it's a waste of time trying to lay it out first and work it from the layout with either VC or Shark. Because there's no way to dictate which side of the part will lift off the workplane, I spent way too much time projecting the crease layout onto new workplanes. Any "sheet metal tools" suite is going to need much better ways to define workplanes and which part of the sheet layout is going to bend and end up on them, in addition to material allowance calculation and bend relief cutouts.
zumer attached the following image(s):
VCbend.PNG (10kb) downloaded 5 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
ianjkirby  
#12 Posted : Saturday, May 23, 2009 7:04:37 AM(UTC)
ianjkirby

Rank: Senior Member

Joined: 6/20/2007(UTC)
Posts: 107
Hi ttrw,
By all means carry on pressing to get the tool to wok correctly, as it should. However, in the meantime, may I suggest bending the bent bit whole first, THEN subtracting the bit you don't want (ie between the 'ears').
Regards, Ian.
;)
Ian Kirby
Wollongong Australia
Back to top
ttrw  
#13 Posted : Saturday, May 23, 2009 11:46:28 AM(UTC)
ttrw

Rank: Senior Member

Joined: 4/1/2007(UTC)
Posts: 1,583

Was thanked: 2 time(s) in 2 post(s)
Originally Posted by: blowlamp Go to Quoted Post
Tom.
I've done this, in ViaCAD.


That's good Martin. Thanks! :D

How did you extrude from the vertices? Or did you just draw at one end and extrude along the vertex from the back?

I would really like a flatten tool here- so the sheet could be laid flat- making a 2D drawing easy to do. Murray- I feel your pain mate! :D:D

Perhaps I'm asking for too much? :confused:
Back to top
blowlamp  
#14 Posted : Saturday, May 23, 2009 5:05:23 PM(UTC)
blowlamp

Rank: Senior Member

Joined: 6/28/2008(UTC)
Posts: 648
Tom.
I drew the outline and extruded to about 3mm thickness. Then bent both tabs up, one at a time, and bearing in mind the effect of first/second point axis placement, along with use of the Ctrl key flip, and in conjunction with the possible addition of a minus sign in the Degrees data entry box. :confused::D:eek: Rotate the view in 3D, and do all the above to achieve the 'U' shape of the finished article. Note that on one of these bends it may be necessay for the start point to be on the lowest edge of the outline to realise a good bend, and the LogiCursor is your friend here. One other thing to remember is that it is possible to snap to the wrong point on the materials thickness, so care is needed when clicking the axis points.

Cheers.
Martin.
Back to top
Steve.M  
#15 Posted : Friday, June 12, 2009 8:10:41 AM(UTC)
Steve.M

Rank: Senior Member

Joined: 6/18/2008(UTC)
Posts: 978

Was thanked: 1 time(s) in 1 post(s)
Tom,

As I am now into the movie business :D

http://rapidshare.com/files/243741858/bend.avi


- Steve
Back to top
jol  
#16 Posted : Friday, June 12, 2009 8:16:15 AM(UTC)
jol

Rank: Senior Member

Joined: 2/26/2007(UTC)
Posts: 2,156

Was thanked: 1 time(s) in 1 post(s)
not sure if it help at all .. but some of the solids tools (like deform and bend for example) work very well on surfaces too - this may give your building strategy more flexibility .. if you feel you're at the limits
Back to top
ttrw  
#17 Posted : Friday, June 12, 2009 8:53:14 AM(UTC)
ttrw

Rank: Senior Member

Joined: 4/1/2007(UTC)
Posts: 1,583

Was thanked: 2 time(s) in 2 post(s)
Originally Posted by: Steve.M Go to Quoted Post
Tom,

As I am now into the movie business


A bit corny I know, but here's an award for your efforts!! :D:D

You gotta have a laugh right? Especially on a Friday afternoon! :D

Cheers Steve! :)
ttrw attached the following image(s):
BAFTA_Statue.jpg (6kb) downloaded 5 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
Steve.M  
#18 Posted : Friday, June 12, 2009 8:58:48 AM(UTC)
Steve.M

Rank: Senior Member

Joined: 6/18/2008(UTC)
Posts: 978

Was thanked: 1 time(s) in 1 post(s)
Originally Posted by: ttrw Go to Quoted Post
A bit corny I know, but here's an award for your efforts!!
Well thank you. I will celebrate this with a couple of Newcastle brown ales :D
Originally Posted by: ttrw Go to Quoted Post

You gotta have a laugh right? Especially on a Friday afternoon!
Any day of the week.


- Steve
Back to top
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF.NET 2.1.2 | YAF.NET © 2003-2024, Yet Another Forum.NET