logo
NOTICE:  This is the new PunchCAD forum. You should have received an email with your new password around August 27, 2014. If you did not, or would like it reset, simply use the Lost Password feature, and enter Answer as the security answer.
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
Modeling a groove. (#1538)
Options
Go to last post Go to first unread
Previous Topic Next Topic
tarmer  
#1 Posted : Friday, August 22, 2008 7:18:16 PM(UTC)
tarmer

Rank: Member

Joined: 7/22/2008(UTC)
Posts: 55
First off I'm using ViaCAD 2D/3D v6. I was wonder what the best way to model a groove in a part. An example might be that which is used to house an o-ring on a shaft. A similar operation would be a channel or groove around an oddly shaped part such as a rectangler block. Specifically how can a feature such as this be added after a number of operation have been don to the part. Anyway I was just wondering.

Thanks,
Toby
Back to top
unique  
#2 Posted : Saturday, August 23, 2008 6:14:35 AM(UTC)
unique

Rank: Senior Member

Joined: 6/24/2008(UTC)
Posts: 591
Hi Toby,

There are many ways again to go about this, I may have taken a long approach given im very new to VC. In your example you could try the following:-

Create the shaft
Create a single curve in position on the OD of the shaft
Extrude a surface to the correct width
Thicken the surface to the correct depth and make a ring solid
Boolean the part from the shaft

OR

Instead of creating a surface to thicken you can create two circles, then extrude them solid to the width you need and then boolean ??

I hope we can have an area on the forum for this type of process at least that way the program gets properly tested and everyone learns !!...just a thought:cool:
unique attached the following image(s):
Oring.png (91kb) downloaded 5 time(s).
Oring2.png (96kb) downloaded 5 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
jdi000  
#3 Posted : Saturday, August 23, 2008 7:21:56 AM(UTC)
jdi000

Rank: Administration

Joined: 7/29/2007(UTC)
Posts: 1,862
United States

Thanks: 1 times
Was thanked: 87 time(s) in 81 post(s)
Hi, Toby

If you are using specific o-ring or groove shapes over and over. You could also draw the grooves 2d profile and use the lathe tool on cylinders the subtract. Solids like blocks you can offset edges to create a path and drag your 2d in and rotate align as needed, then sweep the groove profile with one rail sweep ---> use sweep perpendicular curve ext. , then subtract. You can save the profiles as a symbols and drag in and snap where you need it if you use the same one a lot. Just another way to try.


Jason
ViaCAD b801
Vista
jdi000 attached the following image(s):
grooveprofile2d.JPG (45kb) downloaded 5 time(s).
grooveinsolid.JPG (41kb) downloaded 5 time(s).

You cannot view/download attachments. Try to login or register.
Windows 11, 10
Back to top
tarmer  
#4 Posted : Sunday, August 24, 2008 7:59:58 AM(UTC)
tarmer

Rank: Member

Joined: 7/22/2008(UTC)
Posts: 55
Thanks to both of you, Jason and Paul. I tried it and made it work. I was glad to see that it could also be used to create the groove on a flat surface as well.

As a thought a possible tool suggestion would be one where you select the path then profile and the program then adds or subtracts the profile from the object without you having to go through the extrude, and boolean steps manually. It may save some steps. ;)

Thanks!
Toby
Back to top
Steve.M  
#5 Posted : Sunday, August 24, 2008 9:06:51 PM(UTC)
Steve.M

Rank: Senior Member

Joined: 6/18/2008(UTC)
Posts: 978

Was thanked: 1 time(s) in 1 post(s)
Originally Posted by: tarmer Go to Quoted Post
A similar operation would be a channel or groove around an oddly shaped part such as a rectangler block.
Creating a grove on a surface as you mention can be done by projecting the path of a grove onto the surface. The path on the surface can then be used to sweep the groove shape, or if it is just a rounded groove (as for a ball nose cutter path cutout) then you can use Pipe on the projected path then boolean out.
Steve.M attached the following image(s):
shape01.jpg (36kb) downloaded 5 time(s).
shape02.jpg (20kb) downloaded 5 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
tarmer  
#6 Posted : Wednesday, September 3, 2008 10:32:56 PM(UTC)
tarmer

Rank: Member

Joined: 7/22/2008(UTC)
Posts: 55
Stev.M Your wavy surface example looks neat but begs a dumb question: How do you project the path along the surface?

Thanks
Toby
Back to top
unique  
#7 Posted : Thursday, September 4, 2008 5:41:58 AM(UTC)
unique

Rank: Senior Member

Joined: 6/24/2008(UTC)
Posts: 591
Originally Posted by: tarmer Go to Quoted Post
Stev.M Your wavy surface example looks neat but begs a dumb question: How do you project the path along the surface?

Thanks
Toby


Toby,

As Steve said the curve is projected onto the surface, then a pipe is made using the curve, and finally a boolean ??

HTH
Back to top
tarmer  
#8 Posted : Thursday, September 4, 2008 7:18:45 AM(UTC)
tarmer

Rank: Member

Joined: 7/22/2008(UTC)
Posts: 55
Paul

The part I don't get is how to project the curve onto the surface.

Toby
Back to top
unique  
#9 Posted : Thursday, September 4, 2008 9:22:01 AM(UTC)
unique

Rank: Senior Member

Joined: 6/24/2008(UTC)
Posts: 591
Originally Posted by: tarmer Go to Quoted Post
Paul

The part I don't get is how to project the curve onto the surface.

Toby


Hi Toby,

Project to surface is your friend here. It's in the toolset to the right of infinite plane......then just follow the prompts ;)

Once you have the curve 'on' the surface create a pipe with groove diam OD and zero ID (solid) then boolean last...youre done.

HTH
Back to top
Users browsing this topic
Guest (5)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF.NET 2.1.2 | YAF.NET © 2003-2024, Yet Another Forum.NET