logo
NOTICE:  This is the new PunchCAD forum. You should have received an email with your new password around August 27, 2014. If you did not, or would like it reset, simply use the Lost Password feature, and enter Answer as the security answer.
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
FX support for 3Dconnexion SpaceNavigator? (#1629)
Options
Go to last post Go to first unread
Previous Topic Next Topic
RAMA  
#1 Posted : Monday, September 15, 2008 5:29:01 PM(UTC)
RAMA

Rank: Junior Member

Joined: 2/14/2008(UTC)
Posts: 7
Hello Forum,

I've followed the forum for years without directly contributing and am a heavy Shark user. I've just purchased a new Mac Pro which should be a significant upgrade from my MacBook Pro. I also ordered a 3Dconnexion SpaceNavigator. Is this supported in FX? I can return it if not. Have others had experience with it? Some of my friends have said it's great. Curious if it'll work.

Thanks, Rama
Back to top
tmay  
#2 Posted : Monday, September 15, 2008 5:56:47 PM(UTC)
tmay

Rank: Senior Member

Joined: 2/21/2007(UTC)
Posts: 278
and it's worth it.

tom
Back to top
Tim Olson  
#3 Posted : Monday, September 15, 2008 6:45:29 PM(UTC)
Tim Olson

Rank: Senior Member

Joined: 2/2/2007(UTC)
Posts: 5,447
United States

Was thanked: 502 time(s) in 353 post(s)
Originally Posted by: RAMA Go to Quoted Post
Hello Forum,

I've followed the forum for years without directly contributing and am a heavy Shark user. I've just purchased a new Mac Pro which should be a significant upgrade from my MacBook Pro. I also ordered a 3Dconnexion SpaceNavigator. Is this supported in FX? I can return it if not. Have others had experience with it? Some of my friends have said it's great. Curious if it'll work.

Thanks, Rama


Hi Rama,

You will need Shark FX 5.5. We went through certification with 3dconnexion on two devices for mac (Spacenavigator and Spaceexplorer).

Tim
Tim Olson
IMSI Design/Encore
Back to top
RAMA  
#4 Posted : Monday, September 15, 2008 9:17:20 PM(UTC)
RAMA

Rank: Junior Member

Joined: 2/14/2008(UTC)
Posts: 7
Oh, that's great news! I've downloaded 5.5 beta so will be up and running soon...
Rama
Back to top
awieneke  
#5 Posted : Wednesday, September 17, 2008 1:11:11 AM(UTC)
awieneke

Rank: Member

Joined: 2/22/2008(UTC)
Posts: 70
Originally Posted by: RAMA Go to Quoted Post
3Dconnexion SpaceNavigator.

Thanks, Rama


Hallo,
does the 3Dconnexion SpaceNavigator works with ViaCad.
I would like to buy it also.
i could not find anything about viaCad support on the site of 3d connextion. But i think that i have read ( don't no where ) that it will work.
Back to top
WWW
Tim Olson  
#6 Posted : Wednesday, September 17, 2008 9:17:29 AM(UTC)
Tim Olson

Rank: Senior Member

Joined: 2/2/2007(UTC)
Posts: 5,447
United States

Was thanked: 502 time(s) in 353 post(s)
Originally Posted by: awieneke Go to Quoted Post
Hallo,
does the 3Dconnexion SpaceNavigator works with ViaCad.
I would like to buy it also.
i could not find anything about viaCad support on the site of 3d connextion. But i think that i have read ( don't no where ) that it will work.



ViaCAD 2D/3D V6 supports SpaceNavigator. V5 does not.


Tim
Tim Olson
IMSI Design/Encore
Back to top
awieneke  
#7 Posted : Wednesday, September 17, 2008 10:49:10 AM(UTC)
awieneke

Rank: Member

Joined: 2/22/2008(UTC)
Posts: 70
Originally Posted by: Tim Olson Go to Quoted Post
ViaCAD 2D/3D V6 supports SpaceNavigator. V5 does not.


Tim


Great, i start to love ViaCad more and more,
particularly the bendigtool i used today very successfully:-)
Back to top
WWW
Tim Olson  
#8 Posted : Wednesday, September 17, 2008 12:56:50 PM(UTC)
Tim Olson

Rank: Senior Member

Joined: 2/2/2007(UTC)
Posts: 5,447
United States

Was thanked: 502 time(s) in 353 post(s)
Originally Posted by: awieneke Go to Quoted Post
Great, i start to love ViaCad more and more,
particularly the bendigtool i used today very successfully:-)


Thanks for the feedback. Bending is fun to explore. Bending along a curve also produces some very interesting shapes.


Tim
Tim Olson
IMSI Design/Encore
Back to top
awieneke  
#9 Posted : Wednesday, September 17, 2008 2:42:16 PM(UTC)
awieneke

Rank: Member

Joined: 2/22/2008(UTC)
Posts: 70
Originally Posted by: Tim Olson Go to Quoted Post
Bending is fun to explore. Bending along a curve


Tim


Hallo Tim,
could you tell me moe ?
This sounds very interresting to me.
I used bending around axises and the 'middlebending'. wher can i found the function ' bendig along a curve' ?

hope my english is not to bad.
awieneke attached the following image(s):
bendring.jpg (75kb) downloaded 4 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
WWW
Tim Olson  
#10 Posted : Wednesday, September 17, 2008 3:43:52 PM(UTC)
Tim Olson

Rank: Senior Member

Joined: 2/2/2007(UTC)
Posts: 5,447
United States

Was thanked: 502 time(s) in 353 post(s)
Originally Posted by: awieneke Go to Quoted Post
Hallo Tim,
could you tell me moe ?
This sounds very interresting to me.
I used bending around axises and the 'middlebending'. wher can i found the function ' bendig along a curve' ?

hope my english is not to bad.


I made a quicktime movie in CU showing it applied to making a ring.

http://www.csi-concepts.com/Demo/RingBend.mov

This feature is in Shark LT, Shark, Shark FX and ViaCAD Pro.

Your bend ring is very nice! Feel free to post in the gallery, I'm sure others will find it interesting!



Regards

Tim
Tim Olson
IMSI Design/Encore
Back to top
awieneke  
#11 Posted : Thursday, September 18, 2008 1:21:18 AM(UTC)
awieneke

Rank: Member

Joined: 2/22/2008(UTC)
Posts: 70
Originally Posted by: Tim Olson Go to Quoted Post

This feature is in Shark LT, Shark, Shark FX and ViaCAD Pro.
Your bend ring is very nice!



Thanks Tim, your film over bending is very good. It shows exactly, what up I looked in ViaCad
Can one select the bending path also inside?. My idea is that the ring size does not change, if I change material thickness

Anyway, i should upgrade.
What would you suggest? ViaCad Pro (i can not find an upgrade version from ViaCad ) or one of the Sharks ( better later, too expensively in the moment for me)

[SIZE="1"]'a result of my translation widget ' i hope one can read it[/SIZE]
Back to top
WWW
Tim Olson  
#12 Posted : Monday, September 22, 2008 12:58:01 PM(UTC)
Tim Olson

Rank: Senior Member

Joined: 2/2/2007(UTC)
Posts: 5,447
United States

Was thanked: 502 time(s) in 353 post(s)
>>Can one select the bending path also inside?.

The path can be inside/outside wrt to body.

>>What would you suggest? ViaCad Pro (i can not find an upgrade version >>from ViaCad ) or one of the Sharks ( better later, too expensively in the >>moment for me)

The current version of ViaCAD Pro is V5 where V6 is scheduled for Feb. If you wanted to get on the current code stream (8xx) sooner, you may want to look into Shark LT.


Tim
Tim Olson
IMSI Design/Encore
Back to top
awieneke  
#13 Posted : Tuesday, September 23, 2008 2:10:44 AM(UTC)
awieneke

Rank: Member

Joined: 2/22/2008(UTC)
Posts: 70
Thank you Tim,

Originally Posted by: Tim Olson Go to Quoted Post


The path can be inside/outside wrt to body.
Tim

thank you, this sounds great ! I will download a demoversion to try it.


Originally Posted by: Tim Olson Go to Quoted Post

The current version of ViaCAD Pro is V5 where V6 is scheduled for Feb. If you wanted to get on the current code stream (8xx) sooner, you may want to look into Shark LT.
Tim

MMMh,
where is the tool 'curve bend' in Shark LT ?
i placed a question in the store. What they can offer to me.

back to the thread: I bought the 3dconnexion spacenavigator. It works fine.
But i could not find an easy way to navigate with the spacenavigator and select multible ( severel ) objects. as it is necessery to use the keyboard/an mouse, so i did before.


Is it possible in ViaCad to make own keyboard shortcuts ? in the special one : Group/ungroup and show workplane/change workplanes.

maybe someone is interested in my bendingring see the file.
Another thing i discovered in this file: how easy it is to change the sequence in the features ( history ).
File Attachment(s):
bendring.vc3 (802kb) downloaded 4 time(s).
awieneke attached the following image(s):
where_is_the_tool.jpg (14kb) downloaded 4 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
WWW
Users browsing this topic
Guest (4)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF.NET 2.1.2 | YAF.NET © 2003-2024, Yet Another Forum.NET