logo
NOTICE:  This is the new PunchCAD forum. You should have received an email with your new password around August 27, 2014. If you did not, or would like it reset, simply use the Lost Password feature, and enter Answer as the security answer.
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
Do we need a snapping adjustment ? (#1961)
Options
Go to last post Go to first unread
Previous Topic Next Topic
jol  
#1 Posted : Monday, January 19, 2009 5:58:38 AM(UTC)
jol

Rank: Senior Member

Joined: 2/26/2007(UTC)
Posts: 2,156

Was thanked: 1 time(s) in 1 post(s)
If you are measuring between points or drawing a line where geometry already exists ... you will be (by default) snapping to that existing geometry

Can we have an adjustment to snapping - whereby the second point of that line or measure operation .. snaps first (and by default) to a point at the same depth as the first point - if such a point exists

To illustrate the problem : if I draw a cube at 100 x 100 x 100 in top view .. and measure one edge - I consistently get the answer 141.421 (Angle 315 degrees)

I'm sure we can do better than this - particularly for beginners

Can we prioritise snap points ?

Shouldn't those at the same screen depth get priority !?

Thoughts ?
jol attached the following image(s):
snapping.jpg (26kb) downloaded 5 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
L. Banasky  
#2 Posted : Monday, January 19, 2009 8:26:26 AM(UTC)
L. Banasky

Rank: Senior Member

Joined: 2/16/2007(UTC)
Posts: 601

Thanks: 153 times
Was thanked: 149 time(s) in 102 post(s)
That's a snapping good suggestion Jol !!! I'm always rotating this or that to find the correct points to snap to as a workaround. Thanks Jol, and add this to the lengthly list of good suggestions, a real time saver.
Larry
Back to top
unique  
#3 Posted : Monday, January 19, 2009 11:16:24 AM(UTC)
unique

Rank: Senior Member

Joined: 6/24/2008(UTC)
Posts: 591
Originally Posted by: jol Go to Quoted Post
If you are measuring between points or drawing a line where geometry already exists ... you will be (by default) snapping to that existing geometry

Can we have an adjustment to snapping - whereby the second point of that line or measure operation .. snaps first (and by default) to a point at the same depth as the first point - if such a point exists

To illustrate the problem : if I draw a cube at 100 x 100 x 100 in top view .. and measure one edge - I consistently get the answer 141.421 (Angle 315 degrees)

I'm sure we can do better than this - particularly for beginners

Can we prioritise snap points ?

Shouldn't those at the same screen depth get priority !?

Thoughts ?


Jol,

Are you using Verify>Dist Pt - Pt

In top view im not seeing this on PC...try switching off XYZ align and see if that makes a difference. Are you sure you are not snapping to the origin :p
Back to top
jol  
#4 Posted : Monday, January 19, 2009 11:30:42 AM(UTC)
jol

Rank: Senior Member

Joined: 2/26/2007(UTC)
Posts: 2,156

Was thanked: 1 time(s) in 1 post(s)
look at the image Paul

Yes, it is possible it's a Mac only issue - but I think I remember Larry being on the PC
Back to top
unique  
#5 Posted : Thursday, January 22, 2009 3:55:43 AM(UTC)
unique

Rank: Senior Member

Joined: 6/24/2008(UTC)
Posts: 591
Originally Posted by: jol Go to Quoted Post
look at the image Paul


I did. That is why I asked..Jol

On the PC I dont see that feedback window as shown in your image....I haven't used VC as long as you remember, I just wanted to check if I was doing the same as you.
Back to top
jol  
#6 Posted : Thursday, January 22, 2009 4:13:11 AM(UTC)
jol

Rank: Senior Member

Joined: 2/26/2007(UTC)
Posts: 2,156

Was thanked: 1 time(s) in 1 post(s)
Paul

measure tool (in hollow arrow palette)

XYZ on or off - it's the same

no .. the origin is not a factor
Back to top
unique  
#7 Posted : Thursday, January 22, 2009 8:36:26 AM(UTC)
unique

Rank: Senior Member

Joined: 6/24/2008(UTC)
Posts: 591
Originally Posted by: jol Go to Quoted Post
Paul

measure tool (in hollow arrow palette)

XYZ on or off - it's the same

no .. the origin is not a factor


Sorry mate...tape measure:p okay

Works ok here on PC although the mouse needs a wiggle on the 2nd point sometimes for the data box to actually show up..

Why do we have Tape measure & Dist Pt-Pt, would it not be better to merge the two into one more informative dialogue?
Back to top
jol  
#8 Posted : Thursday, January 22, 2009 8:42:53 AM(UTC)
jol

Rank: Senior Member

Joined: 2/26/2007(UTC)
Posts: 2,156

Was thanked: 1 time(s) in 1 post(s)
OK - thanks Paul

So .. can we verify this is a Mac only issue

Should be easy to fix then !?

EDIT : I just tried this again and it was working fine - on the top edge of my 100 cubed block (top view)

then I tried it on the other edges and got 141mm again

Tim .. surely this is just a case of prioritising point snapping dependent on view ?
jol attached the following image(s):
not.png (10kb) downloaded 5 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
Users browsing this topic
Guest (2)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF.NET 2.1.2 | YAF.NET © 2003-2024, Yet Another Forum.NET