logo
NOTICE:  This is the new PunchCAD forum. You should have received an email with your new password around August 27, 2014. If you did not, or would like it reset, simply use the Lost Password feature, and enter Answer as the security answer.
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
Splines .. just a question - (#2427)
Options
Go to last post Go to first unread
Previous Topic Next Topic
jol  
#1 Posted : Sunday, June 28, 2009 9:44:49 AM(UTC)
jol

Rank: Senior Member

Joined: 2/26/2007(UTC)
Posts: 2,156

Was thanked: 1 time(s) in 1 post(s)
Splines .. just a question - for somebody who uses another CAD

When I draw a spline, the end tangent is always zero .. ie: at the absolute end of the spline, the spline is straight (See A in attached image)

Do other CADs draw splines this way ?

.. or .. as I might expect, is there an option for the endpoints of the splines to have "free" tangency .. thus giving you the possibility of a default spline that does not flatten to the end (See B in attached image)
jol attached the following image(s):
ab.png (41kb) downloaded 5 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
jol  
#2 Posted : Sunday, June 28, 2009 9:54:04 AM(UTC)
jol

Rank: Senior Member

Joined: 2/26/2007(UTC)
Posts: 2,156

Was thanked: 1 time(s) in 1 post(s)
.. and whilst on the subject .. I'd still like to have a default spline type that offers me all the benefits of an Interpolate Spline .. but with the ability to change not only the direction of the tangent, but also the length.

Without that tangent length control - you either need to start adding heaps of points you don't want or have to go to another spline type .. which then have other disadvantages

CDRS had wonderful splines this way - I wish we could offer this same ability !
Back to top
jol  
#3 Posted : Sunday, June 28, 2009 10:20:09 AM(UTC)
jol

Rank: Senior Member

Joined: 2/26/2007(UTC)
Posts: 2,156

Was thanked: 1 time(s) in 1 post(s)
in short .. what I want is not 3 spline types which offer different benefits ..

.. but one default spline type which offers all the benefits of current interpolate and bezier splines (with points-on the spline)

Again - other CADs dont offer 3 spline types .. it's just confusing

how is it done in Rhino etc ?

we need one default Superspline !
Back to top
unique  
#4 Posted : Sunday, June 28, 2009 2:57:48 PM(UTC)
unique

Rank: Senior Member

Joined: 6/24/2008(UTC)
Posts: 591
Originally Posted by: jol Go to Quoted Post

Again - other CADs dont offer 3 spline types .. it's just confusing

how is it done in Rhino etc ?


Yep it sure is...to the point where it's out of control even for development !!!

Rhino does a brilliant job with curves....no whistles and bells...:rolleyes:
Back to top
Tim Olson  
#5 Posted : Tuesday, June 30, 2009 1:02:12 AM(UTC)
Tim Olson

Rank: Senior Member

Joined: 2/2/2007(UTC)
Posts: 5,447
United States

Was thanked: 502 time(s) in 353 post(s)
>>When I draw a spline, the end tangent is always zero .. ie: at the absolute >>end of the spline, the spline is straight (See A in attached image)

Hi Jol

For interpolate splines ACIS defaults the curvature at the start/end to zero.

Unfortunately there are no options to control the magnitude of the start/end slope for an interpolate spline in ACIS.

With our available options to control the magnitude at the start/end of a curve you would need to use either a control point or bezier curve.

Tim
Tim Olson
IMSI Design/Encore
Back to top
Users browsing this topic
Guest (5)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF.NET 2.1.2 | YAF.NET © 2003-2024, Yet Another Forum.NET