logo
NOTICE:  This is the new PunchCAD forum. You should have received an email with your new password around August 27, 2014. If you did not, or would like it reset, simply use the Lost Password feature, and enter Answer as the security answer.
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
Planar Tape Measure (#1141)
Options
Go to last post Go to first unread
Previous Topic Next Topic
Art  
#1 Posted : Tuesday, June 10, 2008 8:22:47 PM(UTC)
Art

Rank: Senior Member

Joined: 3/15/2007(UTC)
Posts: 284

Was thanked: 3 time(s) in 3 post(s)
I would like to see the tape measure tool become planar with the "option" or "control" key modifier.

Too many times I am getting measurements that are useless because they are measuring diagonals in space away from the viewer. So I can't really trust the numbers.

As a matter of fact perhaps the modifier should be used when the measurement is not planar!

Art

Macintel Shark FX 747

[COLOR="Red"]HEY! I 'm a senior member![/COLOR]
Back to top
jol  
#2 Posted : Wednesday, June 11, 2008 2:04:56 AM(UTC)
jol

Rank: Senior Member

Joined: 2/26/2007(UTC)
Posts: 2,156

Was thanked: 1 time(s) in 1 post(s)
Hi Art (Senior Member)

Yep - Good thinking .. this would be a great addition

Of course you can get this (non-depth) data from the verify distance box .. but it WOULD be a great option key for the fast measure tool !!
Back to top
ttrw  
#3 Posted : Wednesday, June 11, 2008 4:49:47 AM(UTC)
ttrw

Rank: Senior Member

Joined: 4/1/2007(UTC)
Posts: 1,583

Was thanked: 2 time(s) in 2 post(s)
Art wrote:

[COLOR="Red"]HEY! I 'm a senior member![/COLOR]


Yes this happened to myself as well. I'm not sure how- but it is there :cool:

Perhaps it is because of the tutorials I provided? Tim?
Back to top
Art  
#4 Posted : Wednesday, June 11, 2008 6:33:33 AM(UTC)
Art

Rank: Senior Member

Joined: 3/15/2007(UTC)
Posts: 284

Was thanked: 3 time(s) in 3 post(s)
100 posts, although the tutorials are greatly appeciated!

Art
Back to top
ttrw  
#5 Posted : Wednesday, June 11, 2008 7:35:47 AM(UTC)
ttrw

Rank: Senior Member

Joined: 4/1/2007(UTC)
Posts: 1,583

Was thanked: 2 time(s) in 2 post(s)
100 posts? Are you sure? Because there are others here with near 100 posts who are still only 'members'- not even junior members. :confused:
Back to top
Art  
#6 Posted : Wednesday, June 11, 2008 10:10:13 AM(UTC)
Art

Rank: Senior Member

Joined: 3/15/2007(UTC)
Posts: 284

Was thanked: 3 time(s) in 3 post(s)
jol wrote:
Hi Art (Senior Member)

Yep - Good thinking .. this would be a great addition

Of course you can get this (non-depth) data from the verify distance box .. but it WOULD be a great option key for the fast measure tool !!



But "verify distance" does not tell you where those measurements are from.

In a couple of years I hope to be asking for an extension of the "interference tool" that would should me everything closer than a specified distance.

Before the tape measure was invented I wanted a readout of dimensions measured (THEY are planar); so often I have to zoom out to read the numbers. Right now what we get is "#" what I need is a number.

Thanks,

Art

Macintel Shark f 747
Back to top
Art  
#7 Posted : Wednesday, July 16, 2008 6:06:20 PM(UTC)
Art

Rank: Senior Member

Joined: 3/15/2007(UTC)
Posts: 284

Was thanked: 3 time(s) in 3 post(s)
Tim,

Could this be put on the "long list" . I do not find this tool that useful now and I could use it daily. The alternative would be to have a readout of what a dimension (which IS planar) reads so I don't have to zoom out.

Art

Macintel Shark FX
Back to top
Tim Olson  
#8 Posted : Wednesday, July 16, 2008 7:07:05 PM(UTC)
Tim Olson

Rank: Senior Member

Joined: 2/2/2007(UTC)
Posts: 5,447
United States

Was thanked: 502 time(s) in 353 post(s)
Art wrote:
Tim,

Could this be put on the "long list" . I do not find this tool that useful now and I could use it daily. The alternative would be to have a readout of what a dimension (which IS planar) reads so I don't have to zoom out.

Art

Macintel Shark FX



Art,

I could put in an option key to modify the behavior. When you mean planar do you mean in the work plane or viewing plane?


Tim
Tim Olson
IMSI Design/Encore
Back to top
Art  
#9 Posted : Wednesday, July 16, 2008 7:21:12 PM(UTC)
Art

Rank: Senior Member

Joined: 3/15/2007(UTC)
Posts: 284

Was thanked: 3 time(s) in 3 post(s)
Great,

I never thought of the work plane, that would be a great option. But, to me, that is second to the view plane. Both would be great.

Thanks!

Art
Back to top
Users browsing this topic
Guest (2)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF.NET 2.1.2 | YAF.NET © 2003-2024, Yet Another Forum.NET