logo
NOTICE:  This is the new PunchCAD forum. You should have received an email with your new password around August 27, 2014. If you did not, or would like it reset, simply use the Lost Password feature, and enter Answer as the security answer.
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
Can't export to DWG (#630)
Options
Go to last post Go to first unread
Previous Topic Next Topic
maglev  
#1 Posted : Friday, November 9, 2007 9:30:56 PM(UTC)
maglev

Rank: Junior Member

Joined: 10/5/2007(UTC)
Posts: 7
Hi folks,
Can anyone help me out with exporting DWG from C2D? I've imported a DWG into it, but can't export it out again. I work on SketchUp on a Mac and I'm trying to use C2D for dimensioning and annotations. I am also trying with a trial version of CU, but it doesn't work either. The resulting DWG is 0 kb.
BTW, do you know where the symbols are? All I found were some readme.c2d files.
Back to top
jol  
#2 Posted : Saturday, November 10, 2007 3:31:09 AM(UTC)
jol

Rank: Senior Member

Joined: 2/26/2007(UTC)
Posts: 2,156

Was thanked: 1 time(s) in 1 post(s)
agree, I've been getting these 0 kb dwg files for about a year now
Back to top
nick  
#3 Posted : Saturday, November 10, 2007 4:10:26 AM(UTC)
nick

Rank: Senior Member

Joined: 2/2/2007(UTC)
Posts: 245
Can you post file or email it to me so I can take a look for you? Are you using SP4 or SP3? You can download the latest build of the software and the symbol library from the following URL:

http://www.cadsoftsolutions.co....2d/download/download.php

All the best
Nick
Back to top
WWW
maglev  
#4 Posted : Saturday, November 10, 2007 2:51:50 PM(UTC)
maglev

Rank: Junior Member

Joined: 10/5/2007(UTC)
Posts: 7
Thanks for your help, I'd really like to keep this software, but I ghave to get it working for me.
Website says you don't want to be emailed.
I'm uploading the file. It shows as 4.5 MB on disk, however it is 297 kb on the upload. Why is that?
Thanks for the link to the symbols library. Why isn't that mentioned when one buys the software?
Thanks again.
Marcel
File Attachment(s):
349 Allison Drive_1_i_plan.c2d (298kb) downloaded 5 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
maglev  
#5 Posted : Saturday, November 10, 2007 2:57:20 PM(UTC)
maglev

Rank: Junior Member

Joined: 10/5/2007(UTC)
Posts: 7
For about a year??? What gives? This software is advertised as compatible with DWG/DXF, have you gotten any answers?
Thanks,
Marcel
Back to top
nick  
#6 Posted : Saturday, November 10, 2007 3:49:30 PM(UTC)
nick

Rank: Senior Member

Joined: 2/2/2007(UTC)
Posts: 245
Hello Marcel

Can you try compressing the file as .zip and re-upload? I think it's either been damaged by upload or was damaged in the first place as I am unable to select large portions of the drawing although I can see them and they appear as objects in object count.

All the best
Nick
Back to top
WWW
maglev  
#7 Posted : Saturday, November 10, 2007 6:17:58 PM(UTC)
maglev

Rank: Junior Member

Joined: 10/5/2007(UTC)
Posts: 7
Thank you Nick, here it goes. I think there might be a "selection mask" activated on the previous one.
File Attachment(s):
349 Allison Drive_1_i_plan.c2d.zip (64kb) downloaded 5 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
nick  
#8 Posted : Sunday, November 11, 2007 5:31:22 PM(UTC)
nick

Rank: Senior Member

Joined: 2/2/2007(UTC)
Posts: 245
Hello Marcel

Looks as though there is a compatibility issue between file and dxf/dwg translator. I have forwarded to development team to take a look as this is an issue that also effects the current shark beta.

Best regards
Nick
Back to top
WWW
Tim Olson  
#9 Posted : Sunday, November 11, 2007 8:02:59 PM(UTC)
Tim Olson

Rank: Senior Member

Joined: 2/2/2007(UTC)
Posts: 5,447
United States

Was thanked: 502 time(s) in 353 post(s)
The SDK we license does not like a layer named "0". It aborts export when it sees this layer name. Change this layer name and it should export. In the next uploaded, we look for this layername and adjust to avoid the sdk limit.
Tim Olson
IMSI Design/Encore
Back to top
maglev  
#10 Posted : Sunday, November 11, 2007 8:23:52 PM(UTC)
maglev

Rank: Junior Member

Joined: 10/5/2007(UTC)
Posts: 7
nick wrote:
Hello Marcel

Looks as though there is a compatibility issue between file and dxf/dwg translator. I have forwarded to development team to take a look as this is an issue that also effects the current shark beta.

Best regards
Nick


Thank you Nick for your help!
Back to top
maglev  
#11 Posted : Sunday, November 11, 2007 8:27:04 PM(UTC)
maglev

Rank: Junior Member

Joined: 10/5/2007(UTC)
Posts: 7
Tim Olson wrote:
The SDK we license does not like a layer named "0". It aborts export when it sees this layer name. Change this layer name and it should export. In the next uploaded, we look for this layername and adjust to avoid the sdk limit.


Thank you Tim, that does solve the problem, oddly enough ;-)
Back to top
maglev  
#12 Posted : Sunday, November 11, 2007 8:29:15 PM(UTC)
maglev

Rank: Junior Member

Joined: 10/5/2007(UTC)
Posts: 7
Thanks Tim, oddly enough that does solve the problem ;-)
Back to top
Tim Olson  
#13 Posted : Sunday, November 11, 2007 8:48:07 PM(UTC)
Tim Olson

Rank: Senior Member

Joined: 2/2/2007(UTC)
Posts: 5,447
United States

Was thanked: 502 time(s) in 353 post(s)
The DXF/DWG format has some limits to the layernames. When we find a limit, we internally adjust it to meet the format.
Tim Olson
IMSI Design/Encore
Back to top
Users browsing this topic
Guest (2)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF.NET 2.1.2 | YAF.NET © 2003-2024, Yet Another Forum.NET