logo
NOTICE:  This is the new PunchCAD forum. You should have received an email with your new password around August 27, 2014. If you did not, or would like it reset, simply use the Lost Password feature, and enter Answer as the security answer.
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
Transferring ViaCAD to another machine (#69)
Options
Go to last post Go to first unread
Previous Topic Next Topic
dissector  
#1 Posted : Friday, March 30, 2007 7:01:26 PM(UTC)
dissector

Rank: Junior Member

Joined: 3/30/2007(UTC)
Posts: 2
Just purchased ViaCad (download), installed on my desktop PC without
any problems.

I figured it would run better on my laptop (PC too old and slow) so I uninstalled it on the PC and re-installed on the laptop.

The problem now is that I can't activate it.
I put in the authorization code but it won't accept it.

Also, it appears the serial number has changed.

Do I need to get another auth. code everytime I transfer the program from
one machine to another?

(the laptop is not connected to the internet, BTW).

Thanks.
Back to top
Tim Olson  
#2 Posted : Friday, March 30, 2007 10:26:40 PM(UTC)
Tim Olson

Rank: Senior Member

Joined: 2/2/2007(UTC)
Posts: 5,447
United States

Was thanked: 502 time(s) in 353 post(s)
>>Do I need to get another auth. code everytime
>>I transfer the program from one machine to another?


Yes. You will need to register each machine you install ViaCAD on.
Tim Olson
IMSI Design/Encore
Back to top
dissector  
#3 Posted : Friday, March 30, 2007 10:44:01 PM(UTC)
dissector

Rank: Junior Member

Joined: 3/30/2007(UTC)
Posts: 2
So I take it's $99 for each time I register?
Back to top
Pauls03  
#4 Posted : Saturday, March 31, 2007 8:12:16 AM(UTC)
Pauls03

Rank: Junior Member

Joined: 3/30/2007(UTC)
Posts: 19
Tim - I'm considering getting ViaCad to run on my OSX machine but that machine is not connected to the internet. I use it for production and have left it off.

Are you saying I need to have the machine connected to the internet just to register ViaCad so I can run it?
Back to top
Tim Olson  
#5 Posted : Saturday, March 31, 2007 12:26:14 PM(UTC)
Tim Olson

Rank: Senior Member

Joined: 2/2/2007(UTC)
Posts: 5,447
United States

Was thanked: 502 time(s) in 353 post(s)
>>So I take it's $99 for each time I register?

No.
Tim Olson
IMSI Design/Encore
Back to top
Tim Olson  
#6 Posted : Saturday, March 31, 2007 12:29:26 PM(UTC)
Tim Olson

Rank: Senior Member

Joined: 2/2/2007(UTC)
Posts: 5,447
United States

Was thanked: 502 time(s) in 353 post(s)
Pauls03 wrote:
Tim - I'm considering getting ViaCad to run on my OSX machine but that machine is not connected to the internet. I use it for production and have left it off.

Are you saying I need to have the machine connected to the internet just to register ViaCad so I can run it?


You need internet access to register. Once is registered, ViaCAD does not require internet access.

You have seven days to register the program, so you can register later, when you have Internet access. During those seven days the program is fully functional.

If you never have Internet access, please call technical support to manually register the product at

Telephone - 1-800-856-9601
Mon. - Fri. (8AM - 5PM CST)
Tim Olson
IMSI Design/Encore
Back to top
Pauls03  
#7 Posted : Saturday, March 31, 2007 1:18:27 PM(UTC)
Pauls03

Rank: Junior Member

Joined: 3/30/2007(UTC)
Posts: 19
Thanks Tim....good to know I can call it in.

Lastly....how about the fillets and bevels? First class as in Concepts 3D or a stripped down version?
Back to top
Tim Olson  
#8 Posted : Saturday, March 31, 2007 2:50:04 PM(UTC)
Tim Olson

Rank: Senior Member

Joined: 2/2/2007(UTC)
Posts: 5,447
United States

Was thanked: 502 time(s) in 353 post(s)
>>Lastly....how about the fillets and bevels? First class as in Concepts 3D or a stripped down version?


Fillet and chamfering are the same in ViaCAD as in Concepts 3D and Concepts Unlimited.

ViaCAD Filleting includes:
Constant Blending (radial, elliptical, vertex)
Variable Blending (linear, by position, radius curve, fixed width, hold lines)

ViaCAD Chamfering/Bevels include:
Constant Chamfers (length,two lengths, length angle, vertex)
Variable Chamfers (lengths, four lengths, lengths angle, by position, fixed width)
Tim Olson
IMSI Design/Encore
Back to top
digby dart  
#9 Posted : Sunday, April 1, 2007 12:38:47 AM(UTC)
digby dart

Rank: Junior Member

Joined: 3/31/2007(UTC)
Posts: 3
I am considering Viacad as a companion product to Sketchup. Your very prompt and direct responses to questions fielded is very impressive. This thread cleared up a few issues for me. Thank you.

The value for money aspect of Viacad is very impressive.
Back to top
Pauls03  
#10 Posted : Sunday, April 1, 2007 6:14:27 AM(UTC)
Pauls03

Rank: Junior Member

Joined: 3/30/2007(UTC)
Posts: 19
Tim Olson wrote:
>>Lastly....how about the fillets and bevels? First class as in Concepts 3D or a stripped down version?


Fillet and chamfering are the same in ViaCAD as in Concepts 3D and Concepts Unlimited.

ViaCAD Filleting includes:
Constant Blending (radial, elliptical, vertex)
Variable Blending (linear, by position, radius curve, fixed width, hold lines)

ViaCAD Chamfering/Bevels include:
Constant Chamfers (length,two lengths, length angle, vertex)
Variable Chamfers (lengths, four lengths, lengths angle, by position, fixed width)


Yep, the program is the real deal - bought and downloaded it yesterday - I was hoping it wasn't going to be a toy or a heavily stripped-down version.

For $99 it's easily the best deal in 3D land and I have no hesitation on recommending it to anyone irregardless of what they do in 3D or which program they use.

Great job with it and much success!!
Back to top
Tim Olson  
#11 Posted : Sunday, April 1, 2007 3:02:52 PM(UTC)
Tim Olson

Rank: Senior Member

Joined: 2/2/2007(UTC)
Posts: 5,447
United States

Was thanked: 502 time(s) in 353 post(s)
>>as a companion product to Sketchup.

Be sure to get the 711 patch available from the Help:Current Version page. It provides support for importing SketchUp v6. 710 was sketchup v5. We do have future plans to support export and the 3D Ware House. (SketchUp is not supported on Vista because of SDK limits)
Tim Olson
IMSI Design/Encore
Back to top
Users browsing this topic
Guest (3)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF.NET 2.1.2 | YAF.NET © 2003-2024, Yet Another Forum.NET