logo
NOTICE:  This is the new PunchCAD forum. You should have received an email with your new password around August 27, 2014. If you did not, or would like it reset, simply use the Lost Password feature, and enter Answer as the security answer.
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
2 Pages<12
My fisrt bolt (#2746)
Options
Go to last post Go to first unread
Previous Topic Next Topic
mikeschn  
#21 Posted : Thursday, December 24, 2009 11:30:56 AM(UTC)
mikeschn

Rank: Senior Member

Joined: 8/21/2007(UTC)
Posts: 284

Thanks: 5 times
Was thanked: 2 time(s) in 2 post(s)
Steve,

I'll have to try that too!

Mike...

Originally Posted by: Steve.M Go to Quoted Post
Hi Mike.

Ah, right.
At one time I did post movies in divx format, but I dont think some like to have to install another player or the divx codec to play them.
I was having a look at camtasia, but for $300 it is too expensive as I would not use it enough. I will now be using Camstudio(free/open source) and then convert to Mov using quicktime pro ($30) and the result are just as good.

- Steve

Luc, sorry for the off topic.
ViaCAD Pro 12 on Windows; Viacad Pro 14 on Mac
Back to top
Steve.M  
#22 Posted : Thursday, December 24, 2009 12:21:37 PM(UTC)
Steve.M

Rank: Senior Member

Joined: 6/18/2008(UTC)
Posts: 978

Was thanked: 1 time(s) in 1 post(s)
Originally Posted by: Luc Go to Quoted Post
The way you draw your bolt inspire me a little idea on how to draw a nut now.
The lead out on the bolt I made is not actually correct, but is ok for quick model. The lead out should be made using an Helix with a draft angle.
Originally Posted by: Luc Go to Quoted Post

I think I will have to inverse the thread to do it.
For a nut, you can actually use a copy of the bolt to boolean out the internal thread.

- Steve
Back to top
mikeschn  
#23 Posted : Thursday, December 24, 2009 3:22:19 PM(UTC)
mikeschn

Rank: Senior Member

Joined: 8/21/2007(UTC)
Posts: 284

Thanks: 5 times
Was thanked: 2 time(s) in 2 post(s)
Originally Posted by: Steve.M Go to Quoted Post
The lead out should be made using an Helix with a draft angle.


Steve,

Could you expand on that "helix with a draft angle" comment. I can't picture that at the moment.

Mike...
ViaCAD Pro 12 on Windows; Viacad Pro 14 on Mac
Back to top
Steve.M  
#24 Posted : Thursday, December 24, 2009 3:47:20 PM(UTC)
Steve.M

Rank: Senior Member

Joined: 6/18/2008(UTC)
Posts: 978

Was thanked: 1 time(s) in 1 post(s)
Originally Posted by: mikeschn Go to Quoted Post
Could you expand on that "helix with a draft angle" comment. I can't picture that at the moment.


Hi Mike,

Of course.

Rather than just using one helix for the thread, you add a second helix with a draft angle for the thread lead out. Then sweep both helix.

Mov attached (this mov is an experiment as I Have changed my screen resolutiuon/ using camstudio for the capture. The mov resolution is also @1024X768. Let me know if any problems viewing..)


Movie direct download


- Steve
Back to top
mikeschn  
#25 Posted : Thursday, December 24, 2009 4:39:48 PM(UTC)
mikeschn

Rank: Senior Member

Joined: 8/21/2007(UTC)
Posts: 284

Thanks: 5 times
Was thanked: 2 time(s) in 2 post(s)
Good job Steve on that movie.

And thanks for explaining the draft. I understand it now.

Mike...
ViaCAD Pro 12 on Windows; Viacad Pro 14 on Mac
Back to top
Luc  
#26 Posted : Sunday, December 27, 2009 11:25:21 PM(UTC)
Luc

Rank: Junior Member

Joined: 4/29/2009(UTC)
Posts: 12
Hi all,

I did the nut threads following Steve advice, using the Subtract Solid tool.

(And Steve, off topics are bonus to me so they are welcomed.)

I am now trying to learn more about my ViaCad. It is fun but not easy for my poor brain. Most of the time I got unexpected results. :-)

What I like most is when I finally understand a new thing and discover new possibilities. Then, I go to bed happy (sometimes too late!)

Luc
Luc attached the following image(s):
Bolt & nuts.jpg (23kb) downloaded 6 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
mikeschn  
#27 Posted : Monday, December 28, 2009 7:58:23 AM(UTC)
mikeschn

Rank: Senior Member

Joined: 8/21/2007(UTC)
Posts: 284

Thanks: 5 times
Was thanked: 2 time(s) in 2 post(s)
Hi Luc,

Since you currently like to learn new stuff, here's an easy way to chamfer your nut...

I used a 30 triangle, revolved around the centerline of the nut...

:D

Mike...
mikeschn attached the following image(s):
nut_cham_02.gif (17kb) downloaded 7 time(s).

You cannot view/download attachments. Try to login or register.
ViaCAD Pro 12 on Windows; Viacad Pro 14 on Mac
Back to top
mikeschn  
#28 Posted : Monday, December 28, 2009 8:03:31 AM(UTC)
mikeschn

Rank: Senior Member

Joined: 8/21/2007(UTC)
Posts: 284

Thanks: 5 times
Was thanked: 2 time(s) in 2 post(s)
BTW Luc,

There are many places where you can get dimensions for standard hardware on the internet if you don't want to buy the machinery handbook.

Here for example...

http://www.portlandbolt.com/products/nuts/

Pick your nut style, and then click on the dimensions tab.

Mike...
ViaCAD Pro 12 on Windows; Viacad Pro 14 on Mac
Back to top
mikeschn  
#29 Posted : Monday, December 28, 2009 9:33:35 AM(UTC)
mikeschn

Rank: Senior Member

Joined: 8/21/2007(UTC)
Posts: 284

Thanks: 5 times
Was thanked: 2 time(s) in 2 post(s)
Originally Posted by: Steve.M Go to Quoted Post
Hi Mike.

Ah, right.
At one time I did post movies in divx format, but I dont think some like to have to install another player or the divx codec to play them.
I was having a look at camtasia, but for $300 it is too expensive as I would not use it enough. I will now be using Camstudio(free/open source) and then convert to Mov using quicktime pro ($30) and the result are just as good.

- Steve

Luc, sorry for the off topic.


Steve,

I've created my first movie, and converted it to quicktime's .mov format, same way as you do. But my file is huge... 18 megs for this nut for example. Any suggestions to make it smaller?

http://www.mikenchell.com/images2/nut.mov

Mike...
ViaCAD Pro 12 on Windows; Viacad Pro 14 on Mac
Back to top
Steve.M  
#30 Posted : Monday, December 28, 2009 3:24:55 PM(UTC)
Steve.M

Rank: Senior Member

Joined: 6/18/2008(UTC)
Posts: 978

Was thanked: 1 time(s) in 1 post(s)
Originally Posted by: mikeschn Go to Quoted Post
Any suggestions to make it smaller?
I have not checked the mov file as my gateway is currently blocking the site:- mikenchell.com. What is that site? I will need to check logs

What you should try:-
For screen capture, cut the color depth to max 8bit per channel(24 bit color depth max). Keep the frame rate to 15 frames or less.
When encoding(converting to mov) drop the quality but have multi-pass encoding.


- Steve
Back to top
Luc  
#31 Posted : Monday, December 28, 2009 4:54:08 PM(UTC)
Luc

Rank: Junior Member

Joined: 4/29/2009(UTC)
Posts: 12
Hi all,

With the help of these wonderful movies and great advices of yours I think I made a better draw of my nut.

Not yet the industry standard but better than my first try.

Sometimes I had to post my message twice to see it on the forum. Hope you don't receive it twice.

Luc
Luc attached the following image(s):
Nut 3.jpg (19kb) downloaded 6 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
Steve.M  
#32 Posted : Monday, December 28, 2009 5:27:33 PM(UTC)
Steve.M

Rank: Senior Member

Joined: 6/18/2008(UTC)
Posts: 978

Was thanked: 1 time(s) in 1 post(s)
Hi Luc,

Another way to create the chamfer on the nut:-


Mov direct download


- Steve
Back to top
mikeschn  
#33 Posted : Monday, December 28, 2009 5:47:46 PM(UTC)
mikeschn

Rank: Senior Member

Joined: 8/21/2007(UTC)
Posts: 284

Thanks: 5 times
Was thanked: 2 time(s) in 2 post(s)
Originally Posted by: Steve.M Go to Quoted Post
Hi Luc,

Another way to create the chamfer on the nut:-


Mov direct download


- Steve


Steve,

The file size on this movie is nice too! Can you send me the avi file that you created so I can see how you did it? Or tell me which codec you use, and the settings you used...

Thanks,

Mike...

P.S. I don't come across many applications for the use of intersect. The last part I recall doing an intersect on was a diff carrier...

UserPostedImage
ViaCAD Pro 12 on Windows; Viacad Pro 14 on Mac
Back to top
Steve.M  
#34 Posted : Monday, December 28, 2009 6:12:02 PM(UTC)
Steve.M

Rank: Senior Member

Joined: 6/18/2008(UTC)
Posts: 978

Was thanked: 1 time(s) in 1 post(s)
Originally Posted by: mikeschn Go to Quoted Post
tell me which codec you use, and the settings you used...


Hi Mike,

I am using Camstudio with the "Techsmith capture codec". fps set to 15.(pic01)

Conversion to Mov in quicktime set as shown:-(pic02)
Steve.M attached the following image(s):
01.png (58kb) downloaded 6 time(s).
02.png (10kb) downloaded 6 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
mikeschn  
#35 Posted : Monday, December 28, 2009 6:37:42 PM(UTC)
mikeschn

Rank: Senior Member

Joined: 8/21/2007(UTC)
Posts: 284

Thanks: 5 times
Was thanked: 2 time(s) in 2 post(s)
this doesn't look good...
mikeschn attached the following image(s):
techsmith.gif (8kb) downloaded 6 time(s).

You cannot view/download attachments. Try to login or register.
ViaCAD Pro 12 on Windows; Viacad Pro 14 on Mac
Back to top
mikeschn  
#36 Posted : Tuesday, December 29, 2009 6:02:46 AM(UTC)
mikeschn

Rank: Senior Member

Joined: 8/21/2007(UTC)
Posts: 284

Thanks: 5 times
Was thanked: 2 time(s) in 2 post(s)
Steve,

I reviewed another program, Jing, which is put out by the same people as Camtasia. For $15 one can produce really compact, really high quality mp4 file that you can play in quicktime.

So I tried it. Here's an example...
http://www.mikenchell.com/images2/complete_nut.mp4

and here it is, saved as a movie... (via Quicktime Pro)
http://www.mikenchell.com/images2/complete_nut.mov

It's 3 minutes and 23 seconds long, and it's only 8 megs. :)

Mike...
ViaCAD Pro 12 on Windows; Viacad Pro 14 on Mac
Back to top
Steve.M  
#37 Posted : Tuesday, December 29, 2009 4:01:08 PM(UTC)
Steve.M

Rank: Senior Member

Joined: 6/18/2008(UTC)
Posts: 978

Was thanked: 1 time(s) in 1 post(s)
Originally Posted by: mikeschn Go to Quoted Post
I reviewed another program, Jing,


I have looked at that before, but only the free version, and I only got as far as the program insisting I create an account with Screencast.com to continue, so I removed the program.
Does the paid-for program make you create an account with screencast.com for it to work? I also dont really like the fact that it only captures 5 minutes.


- Steve
Back to top
mikeschn  
#38 Posted : Tuesday, December 29, 2009 4:45:31 PM(UTC)
mikeschn

Rank: Senior Member

Joined: 8/21/2007(UTC)
Posts: 284

Thanks: 5 times
Was thanked: 2 time(s) in 2 post(s)
Originally Posted by: Steve.M Go to Quoted Post
I have looked at that before, but only the free version, and I only got as far as the program insisting I create an account with Screencast.com to continue, so I removed the program.
Does the paid-for program make you create an account with screencast.com for it to work? I also dont really like the fact that it only captures 5 minutes.
- Steve


Yes, it forces you to create an account. But you don't have to use that account. I save my files to my desktop, and then host them on my own server.

Yes, I was a little concerned about the 5 minute limit, but then I decided that I would probably only do short movies anyways.

For the high quality, and the small file size, it was worth spending $14.95. :rolleyes:

Mike...

P.S. Can't you combine movies in Quicktime Pro?

edit... yep!!!

Combining Two QuickTime Movies into One

With QuickTime Pro, you can easily add one movie to another to make one longer movie.
To combine two movies:

1. In QuickTime Player, choose Edit > Select All to select the entire contents of the first movie.
2. Choose Edit > Copy, then open the second movie.
3. Move the playhead to the point at which you want to insert the movie (usually the very beginning or end of the original movie), and choose Edit > Paste.
4. Choose File > Save As to name and save the new movie.
ViaCAD Pro 12 on Windows; Viacad Pro 14 on Mac
Back to top
Steve.M  
#39 Posted : Tuesday, December 29, 2009 5:20:34 PM(UTC)
Steve.M

Rank: Senior Member

Joined: 6/18/2008(UTC)
Posts: 978

Was thanked: 1 time(s) in 1 post(s)
Originally Posted by: mikeschn Go to Quoted Post
For the high quality, and the small file size, it was worth spending $14.95.


I am not really concerned with the small cost, just with the program wanting to connect out (which is probably every time you run it). Call me paranoid, but I am very security conscious and control all internet connections for my own use, I do not allow programs to connect out whenever they want to

I can workaround, using the camstudio lossless capture-> expand to RGB, convert to MOV. I will use that or go back to xvid, or stop making movies.
Back to top
Jean-Francois Jacques  
#40 Posted : Thursday, September 18, 2014 1:32:39 PM(UTC)
Jean-Francois Jacques

Rank: Senior Member

Joined: 11/25/2009(UTC)
Posts: 833
Canada

Thanks: 2 times
Was thanked: 29 time(s) in 21 post(s)
ACIS SAT is also a good format. Yes, I use McMaster for a long time. Is very useful.
METEORE DESIGN / KEKO Stand
Jean-Francois Jacques, Industrial Designer
SharkCad Pro V14 B1653
Platform macOS 14 Sonoma
Back to top
WWW
Users browsing this topic
Guest (11)
2 Pages<12
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF.NET 2.1.2 | YAF.NET © 2003-2024, Yet Another Forum.NET