logo
NOTICE:  This is the new PunchCAD forum. You should have received an email with your new password around August 27, 2014. If you did not, or would like it reset, simply use the Lost Password feature, and enter Answer as the security answer.
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
Radius dimension difficulties (#2646)
Options
Go to last post Go to first unread
Previous Topic Next Topic
hadmack  
#1 Posted : Thursday, November 12, 2009 12:58:05 PM(UTC)
hadmack

Rank: Junior Member

Joined: 1/26/2009(UTC)
Posts: 13
I am working on dimensioning a solid part in model to sheet mode. In one viewport I try to dimension a round chamfer with the radius tool and the dimension does not show up but clearly was created. When I enlarge the viewport extents I find the dimension significantly offset from my part and snapped to an invisible center point. I frequently have this problem dimensioning with the radius and diameter tools. Sometimes it will or won't work for different curves on the same part. Any ideas? Thanks.
Back to top
Tim Olson  
#2 Posted : Thursday, November 12, 2009 5:01:46 PM(UTC)
Tim Olson

Rank: Senior Member

Joined: 2/2/2007(UTC)
Posts: 5,447
United States

Was thanked: 502 time(s) in 353 post(s)
Originally Posted by: hadmack Go to Quoted Post
I am working on dimensioning a solid part in model to sheet mode. In one viewport I try to dimension a round chamfer with the radius tool and the dimension does not show up but clearly was created. When I enlarge the viewport extents I find the dimension significantly offset from my part and snapped to an invisible center point. I frequently have this problem dimensioning with the radius and diameter tools. Sometimes it will or won't work for different curves on the same part. Any ideas? Thanks.


Private email or post the file and I can check if its fixed in V7.

Tim
Tim Olson
IMSI Design/Encore
Back to top
jdi000  
#3 Posted : Thursday, November 12, 2009 5:56:34 PM(UTC)
jdi000

Rank: Administration

Joined: 7/29/2007(UTC)
Posts: 1,862
United States

Thanks: 1 times
Was thanked: 87 time(s) in 81 post(s)
Originally Posted by: hadmack Go to Quoted Post
I am working on dimensioning a solid part in model to sheet mode. In one viewport I try to dimension a round chamfer with the radius tool and the dimension does not show up but clearly was created. When I enlarge the viewport extents I find the dimension significantly offset from my part and snapped to an invisible center point. I frequently have this problem dimensioning with the radius and diameter tools. Sometimes it will or won't work for different curves on the same part. Any ideas? Thanks.



Hi hadmack


can you post a example of what types you have issues with?


Jason
Windows 11, 10
Back to top
hadmack  
#4 Posted : Thursday, November 19, 2009 2:38:14 PM(UTC)
hadmack

Rank: Junior Member

Joined: 1/26/2009(UTC)
Posts: 13
Is it possible to input multiline text for radial dimensions? Is there some way to type an escaped CR character into the text box?

Currently I use the dimension for the first line, then add a text box below for additional lines. Unfortunately they don't move together or scale in the same way.
Back to top
Tim Olson  
#5 Posted : Thursday, November 19, 2009 4:39:40 PM(UTC)
Tim Olson

Rank: Senior Member

Joined: 2/2/2007(UTC)
Posts: 5,447
United States

Was thanked: 502 time(s) in 353 post(s)
Originally Posted by: hadmack Go to Quoted Post
Is it possible to input multiline text for radial dimensions? Is there some way to type an escaped CR character into the text box?

Currently I use the dimension for the first line, then add a text box below for additional lines. Unfortunately they don't move together or scale in the same way.


Try adding a \P to the dimension string.

#\P hello world

Hello world will be placed on the line under the Diameter value

Tim
Tim Olson
IMSI Design/Encore
Back to top
Tim Olson  
#6 Posted : Thursday, November 19, 2009 4:42:18 PM(UTC)
Tim Olson

Rank: Senior Member

Joined: 2/2/2007(UTC)
Posts: 5,447
United States

Was thanked: 502 time(s) in 353 post(s)
Originally Posted by: jdi000 Go to Quoted Post
Tim

I noticed the center mark dimension was going to an objects old location not where it was moved to like the radius and center dims.


Thanks

Jason


If you have an example that would be great. My quick test was ok.

Tim
Tim Olson
IMSI Design/Encore
Back to top
jdi000  
#7 Posted : Thursday, November 19, 2009 6:08:01 PM(UTC)
jdi000

Rank: Administration

Joined: 7/29/2007(UTC)
Posts: 1,862
United States

Thanks: 1 times
Was thanked: 87 time(s) in 81 post(s)
Originally Posted by: Tim Olson Go to Quoted Post
If you have an example that would be great. My quick test was ok.

Tim



Hi Tim


See attached example the center mark is in location of ref circle for cutout by solid is moved.

Thanks
Jason
File Attachment(s):
move solid mtos.vc3 (146kb) downloaded 5 time(s).

You cannot view/download attachments. Try to login or register.
Windows 11, 10
Back to top
Tim Olson  
#8 Posted : Thursday, November 19, 2009 10:16:43 PM(UTC)
Tim Olson

Rank: Senior Member

Joined: 2/2/2007(UTC)
Posts: 5,447
United States

Was thanked: 502 time(s) in 353 post(s)
>>See attached example the center mark is in
>>location of ref circle for cutout by solid is moved.

Thanks for the example. This was also fixed when with the radial/diameter bug. This correction be in the next viacad/shark service packs. It is specific to the polyline hidden line mode.


Tim
Tim Olson
IMSI Design/Encore
Back to top
hadmack  
#9 Posted : Friday, November 20, 2009 12:31:54 PM(UTC)
hadmack

Rank: Junior Member

Joined: 1/26/2009(UTC)
Posts: 13
This kind of does what I need it to. Your example works fine but if you try:
# hello\P world
the hello ends up on top of the diameter value. This doesn't work either:
hello world\P#
I would really like to see this feature functional though. Are there any other hidden escape codes like the \P that may be useful such as tabs or alignment markers? Thanks.
Back to top
hadmack  
#10 Posted : Friday, November 20, 2009 12:32:50 PM(UTC)
hadmack

Rank: Junior Member

Joined: 1/26/2009(UTC)
Posts: 13
Originally Posted by: Tim Olson Go to Quoted Post
Try adding a \P to the dimension string.

#\P hello world

Hello world will be placed on the line under the Diameter value


This kind of does what I need it to. Your example works fine but if you try:
# hello\P world
the hello ends up on top of the diameter value. This doesn't work either:
hello world\P#
I would really like to see this feature functional though. Are there any other hidden escape codes like the \P that may be useful such as tabs or alignment markers? Thanks.
Back to top
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF.NET 2.1.2 | YAF.NET © 2003-2024, Yet Another Forum.NET