logo
NOTICE:  This is the new PunchCAD forum. You should have received an email with your new password around August 27, 2014. If you did not, or would like it reset, simply use the Lost Password feature, and enter Answer as the security answer.
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
"Lathe Axis Intersects Wire"; CRASH (#5104)
Options
Go to last post Go to first unread
Previous Topic Next Topic
ZeroLengthCurve  
#1 Posted : Thursday, May 1, 2014 1:16:26 PM(UTC)
ZeroLengthCurve

Rank: Senior Member

Joined: 5/15/2008(UTC)
Posts: 994

Thanks: 26 times
Was thanked: 44 time(s) in 28 post(s)
SLT V 8, SP 1

[[ edit: v8.0..0 Build 1003; no SP info present.]]

Tyring and trying to recreate this impeller:

http://www.youtube.com/watch?v=...ure=youtube_gdata_player

At time index 54 seconds.

Lathe Solid won't work, and Revolve Surface crashes SLT.

My model basic hub/core starts with 6 curves:

1. Top piece/horizontal curve (line),

2. Control point spline mimicing an arc

3. Vertical line downward from spline

4. Control point spline moving toward center/core/axis, with a slight "hook" downard

5. Small horizontal piece, smaller than at the top

6. Compulsory curve Lathe Solid demands; present for Revolve Surface.

I have not even tried the vanes yet.

When I use the Revolve Surface tool, I get "Lathe Axis Intersects Wire"

SLT then kinda jiggles, then throws up the "Shark has stopped working..." dialog box.

What gives?
Back to top
ZeroLengthCurve  
#2 Posted : Thursday, May 1, 2014 1:22:06 PM(UTC)
ZeroLengthCurve

Rank: Senior Member

Joined: 5/15/2008(UTC)
Posts: 994

Thanks: 26 times
Was thanked: 44 time(s) in 28 post(s)
JEEZ! "PERVERSITY OF THE INANIMATE" struck again.

I was about to upload a photo of my model when I notice the tool had another option. I was in "Two Point Revolved Surface". It repeatedly crashed.

Then, I clicked the option for "Curve Revolved Surface", and it worked.

I undid the revolve and reattempted the original method. It did not crash. now, either one works -- whether or not the session is not ended and restarted.
ZeroLengthCurve attached the following image(s):
20140501_121501.jpg (56kb) downloaded 7 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
ZeroLengthCurve  
#3 Posted : Thursday, May 1, 2014 1:34:23 PM(UTC)
ZeroLengthCurve

Rank: Senior Member

Joined: 5/15/2008(UTC)
Posts: 994

Thanks: 26 times
Was thanked: 44 time(s) in 28 post(s)
The crash was not repeatable because during the reconstruction of the crash attempts, I forgot to close the profile before using Revolve Surface.

Now, when the profile is closed (joined curves), SLT v8 crashes.

The Lathe Solid tool does not like open or closed profiles. Open profile produces "Gaps detected...". A closed profile produces:

"ACIS Error

! Self-intersection created by profile intersecting axis or crossing center of elliptical path.:Lathe_312" "OK"
ZeroLengthCurve attached the following image(s):
20140501_121501.jpg (56kb) downloaded 8 time(s).
20140501_122426.jpg (23kb) downloaded 8 time(s).
20140501_122440.jpg (35kb) downloaded 8 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
ZeroLengthCurve  
#4 Posted : Thursday, May 1, 2014 1:38:11 PM(UTC)
ZeroLengthCurve

Rank: Senior Member

Joined: 5/15/2008(UTC)
Posts: 994

Thanks: 26 times
Was thanked: 44 time(s) in 28 post(s)
Crash Dialog Box attached:

Hmm. Multiple attempts to attach the cam pic of the SLT crash dialog box refuse to upload. A reshot photo won't, and a direct camera shot won't.

...

Hmmm. Must've been the resolution due to the lens picking up too much detail at 2048 by xxxx
ZeroLengthCurve attached the following image(s):
20140501_123910.jpg (91kb) downloaded 8 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
ZeroLengthCurve  
#5 Posted : Thursday, May 1, 2014 2:15:02 PM(UTC)
ZeroLengthCurve

Rank: Senior Member

Joined: 5/15/2008(UTC)
Posts: 994

Thanks: 26 times
Was thanked: 44 time(s) in 28 post(s)
I did not model the smaller vanes. This is what I achieved.

Cam shots incl:

-- The early stage vanes and hub

-- Settings I used to polar duplicate the parts

An earlier missetting with the number of degrees produced a solid positioned with the parent, when I set 16 duplicates but it was at 45 vs 22.5.
ZeroLengthCurve attached the following image(s):
20140501_130946.jpg (71kb) downloaded 7 time(s).
20140501_131004.jpg (67kb) downloaded 7 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
ZeroLengthCurve  
#6 Posted : Thursday, May 1, 2014 3:28:30 PM(UTC)
ZeroLengthCurve

Rank: Senior Member

Joined: 5/15/2008(UTC)
Posts: 994

Thanks: 26 times
Was thanked: 44 time(s) in 28 post(s)
Here are a few more crude, early stages of making the impeller.

Filleting at the intersection of the hub and inner side of the vanes is not working out so well, so maybe my original construction made bad bodies.

I revolved a surface to alter the shape of the outer edges of the impeller vanes.
ZeroLengthCurve attached the following image(s):
20140501_134238.jpg (52kb) downloaded 7 time(s).
20140501_134245.jpg (48kb) downloaded 7 time(s).
20140501_134313.jpg (62kb) downloaded 8 time(s).
20140501_134344.jpg (49kb) downloaded 7 time(s).
20140501_135546.jpg (72kb) downloaded 7 time(s).
20140501_141635.jpg (49kb) downloaded 7 time(s).
20140501_141754.jpg (61kb) downloaded 7 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF.NET 2.1.2 | YAF.NET © 2003-2024, Yet Another Forum.NET