logo
NOTICE:  This is the new PunchCAD forum. You should have received an email with your new password around August 27, 2014. If you did not, or would like it reset, simply use the Lost Password feature, and enter Answer as the security answer.
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
Need to make a hole (#3870)
Options
Go to last post Go to first unread
Previous Topic Next Topic
tpaczkowski  
#1 Posted : Tuesday, July 19, 2011 1:43:42 PM(UTC)
tpaczkowski

Rank: Junior Member

Joined: 1/5/2011(UTC)
Posts: 2
I have an stp file that I've imported into ViaCad Pro6. There is a peanut shape on the back of the object that should be a hole. However, I can't find any way to select the back surface and the peanut shape separately to do a subtractive combine or anything else. I've tried ungrouping. I've tried changing the object type. I've attached a jpg with the back surface duplicated and moved to the right (for illustration purposes).

Does anyone have any Ideas how to proceed?
Thanks.
tpaczkowski attached the following image(s):
holePlease.jpg (27kb) downloaded 5 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
blowlamp  
#2 Posted : Tuesday, July 19, 2011 2:00:00 PM(UTC)
blowlamp

Rank: Senior Member

Joined: 6/28/2008(UTC)
Posts: 648
Is it possible to upload the file for us to look at and play with? You might even send just the duplicated bit that you show in your pic, if that's easier.


Martin.
Back to top
jdi000  
#3 Posted : Tuesday, July 19, 2011 7:28:56 PM(UTC)
jdi000

Rank: Administration

Joined: 7/29/2007(UTC)
Posts: 1,862
United States

Thanks: 1 times
Was thanked: 87 time(s) in 81 post(s)
Hi


Did you try the curve/ surface intersect tool to see if it pulls arcs out?


Regards

Jason
jdi000 attached the following image(s):
curve surface tool.PNG (23kb) downloaded 5 time(s).

You cannot view/download attachments. Try to login or register.
Windows 11, 10
Back to top
rockyroad_us  
#4 Posted : Wednesday, July 20, 2011 8:46:42 AM(UTC)
rockyroad_us

Rank: Senior Member

Joined: 9/12/2009(UTC)
Posts: 608
Man
United States
Location: In my place

Was thanked: 59 time(s) in 51 post(s)
I would select the peanut curve and extrude to make a solid and then subtract? If the peanut surface can be selected, you can extrude the surface.
FX 7-FXPro14-1650
MacPro 11.7.4
2x2.8GHz Quad Xeon 32GB
NVIDIA 4 K5000 4GB
Work
Back to top
WWW
ZeroLengthCurve  
#5 Posted : Wednesday, July 20, 2011 12:29:28 PM(UTC)
ZeroLengthCurve

Rank: Senior Member

Joined: 5/15/2008(UTC)
Posts: 993

Thanks: 23 times
Was thanked: 43 time(s) in 27 post(s)
Originally Posted by: tpaczkowski Go to Quoted Post
I have an stp file that I've imported into ViaCad Pro6. There is a peanut shape on the back of the object that should be a hole. However, I can't find any way to select the back surface and the peanut shape separately to do a subtractive combine or anything else. I've tried ungrouping. I've tried changing the object type. I've attached a jpg with the back surface duplicated and moved to the right (for illustration purposes).

Does anyone have any Ideas how to proceed?
Thanks.


---

Does the peanut shaped set of curves appear in the Features tab of the Concept Explorer? What happens if you export it to DXF, and then import it into a new VC file? Is it selectable. Have you exported it to other formats?

Also, of the source, did you import the STL with different options to see if any healing/self-healing option appears?

Any saving as other formats and then importing to VC? What happens in the demo version of VC 2D/3D v8? Any diffs there?
Back to top
tpaczkowski  
#6 Posted : Wednesday, July 20, 2011 4:48:26 PM(UTC)
tpaczkowski

Rank: Junior Member

Joined: 1/5/2011(UTC)
Posts: 2
Thanks to everyone for your quick responses. I used a little bit of everyone's advice and ended up stumbling on the solution.

blowlamp, I was unable to upload my vcp project, even a smaller version of it, even stuffed into a zip file.The two Jpgs I attached to this post uploaded fine, so it must be a size limit thing.

So, exporting and re-importing as different formats (DXF, OBJ, etc) didn't work.
Changing different object types didn't help either. The problem was always that the peanut could not be selected by itself. The whole surface would select.

The solution: After importing, I changed the object type to surfaces. While hunting for the curve/surface intersect tool, I somehow hit the "untrim surface" tool, AND happened to click on our surface in question. What happened is that the whole surface filled in and turned into a rectangle. See jpg "holeinOne-1." I then quickly did an "undo" to correct my spastic clickings and behold "holeinOne-2.jpg" the hole was un-filled! Solved? Good enough.
tpaczkowski attached the following image(s):
holeInOne-1.jpg (23kb) downloaded 5 time(s).
holeInOne-2.jpg (25kb) downloaded 5 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
Users browsing this topic
Guest (3)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF.NET 2.1.2 | YAF.NET © 2003-2024, Yet Another Forum.NET