logo
NOTICE:  This is the new PunchCAD forum. You should have received an email with your new password around August 27, 2014. If you did not, or would like it reset, simply use the Lost Password feature, and enter Answer as the security answer.
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

New Topic Post Reply
Options
Go to last post Go to first unread
andyww  
#1 Posted : Sunday, April 09, 2017 4:36:14 AM(UTC)
Quote
andyww

Rank: Guest

Joined: 4/9/2017(UTC)
Posts: 5

I am trying to extrude a shape which has filleted internal sides, at an extrusion offset angle of 8 degrees.

The problem is the arcs of the fillets reduce in radius to zero as the extrusion progresses. This would be expected but is there any way to maintain the arcs constant?

jdi000  
#2 Posted : Sunday, April 09, 2017 6:14:54 AM(UTC)
Quote
jdi000

Rank: Senior Member

Joined: 7/29/2007(UTC)
Posts: 1,484
United States

Was thanked: 24 time(s) in 24 post(s)
Andy

Can you post some pics of what you are describing?

Not sure what this looks like but can you add the radius after extrusion.

Regards

Jason
Windows 10, Win 7
L. Banasky  
#3 Posted : Sunday, April 09, 2017 6:30:29 AM(UTC)
Quote
L. Banasky

Rank: Senior Member

Joined: 2/16/2007(UTC)
Posts: 326

Thanks: 12 times
Was thanked: 30 time(s) in 26 post(s)
Hi Andy,
As Jason suggested, an example would be helpful.
You could subtract a tapered solid.
Larry
File Attachment(s):
Extrusion.sfx (103kb) downloaded 3 time(s).
L. Banasky attached the following image(s):
Extrusion.jpg
andyww  
#4 Posted : Monday, April 10, 2017 2:57:16 AM(UTC)
Quote
andyww

Rank: Guest

Joined: 4/9/2017(UTC)
Posts: 5

This shows the issue, the lines should end up parallel rather than the radius tapering and the lines converging, eventually to a point.
andyww attached the following image(s):
extrude.png
L. Banasky  
#5 Posted : Monday, April 10, 2017 4:10:27 AM(UTC)
Quote
L. Banasky

Rank: Senior Member

Joined: 2/16/2007(UTC)
Posts: 326

Thanks: 12 times
Was thanked: 30 time(s) in 26 post(s)
Andy,
As Jason suggested:

<<<< Not sure what this looks like but can you add the radius after extrusion.>>>>
seems to work well.
Larry
File Attachment(s):
Extrusion2.sfx (31kb) downloaded 4 time(s).
L. Banasky attached the following image(s):
Extrusion2.jpg
andyww  
#6 Posted : Monday, April 10, 2017 11:25:23 AM(UTC)
Quote
andyww

Rank: Guest

Joined: 4/9/2017(UTC)
Posts: 5


That is what I need to do.

How to do this?

Thanks.
L. Banasky  
#7 Posted : Monday, April 10, 2017 12:50:32 PM(UTC)
Quote
L. Banasky

Rank: Senior Member

Joined: 2/16/2007(UTC)
Posts: 326

Thanks: 12 times
Was thanked: 30 time(s) in 26 post(s)
Draw the outside and inside lines.
Extrude with 8 degree taper.
Use Constant Blend, and select the corner where the inside
sides meet.
Larry
L. Banasky attached the following image(s):
Constant Blend.jpg
andyww  
#8 Posted : Wednesday, April 12, 2017 8:02:39 AM(UTC)
Quote
andyww

Rank: Guest

Joined: 4/9/2017(UTC)
Posts: 5

When I try this is seems to be applying a fillet to all corners of the selected corner, including the front and back faces.

I have made sure nothing is originally selected, then selecting just the curve in the existing corner does this.
andyww attached the following image(s):
solid.png
andyww  
#9 Posted : Wednesday, April 12, 2017 8:38:57 AM(UTC)
Quote
andyww

Rank: Guest

Joined: 4/9/2017(UTC)
Posts: 5


OK I have this now. Doing a multi-select works.

Thanks!
Quick Reply Show Quick Reply
Users browsing this topic
Guest (3)
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.