logo
NOTICE:  This is the new PunchCAD forum. You should have received an email with your new password around August 27, 2014. If you did not, or would like it reset, simply use the Lost Password feature, and enter Answer as the security answer.
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
Create Arc with 2 Tangents help (#2676)
Options
Go to last post Go to first unread
Previous Topic Next Topic
blowlamp  
#1 Posted : Friday, November 27, 2009 5:50:48 AM(UTC)
blowlamp

Rank: Senior Member

Joined: 6/28/2008(UTC)
Posts: 648
I'm attempting to create an arc that is tangent to a circle and a straight line. I have attached a picture to help explain what I need. The arc shown in purple must be tangent to the black line at the point where the blue line intersects with it - this is no problem as I'm using the Tangent Points Arc tool. What I can not achieve is tangency between the red circle and the purple arc. The radius of the purple arc is not known and doesn't matter, it just needs to be tangent to the red circle and the black line. I feel I'm missing something simple here but I just can't work it out. Does anyone have a solution to this?

Thanks.
Martin.
blowlamp attached the following image(s):
arctangent.jpg (25kb) downloaded 4 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
zumer  
#2 Posted : Friday, November 27, 2009 10:42:43 AM(UTC)
zumer

Rank: Senior Member

Joined: 11/4/2007(UTC)
Posts: 515

Was thanked: 1 time(s) in 1 post(s)
Martin: Draw a line normal to the tangent definer from the intersection point. To be tangential to the line at the intersection, the arc's centrepoint will be along a normal from there. Mirror the circle about the normal line, then fit a 3-tangent-point circle to the line and the two circles, then trim to the circle and line.
zumer attached the following image(s):
tangential solution.PNG (12kb) downloaded 4 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
blowlamp  
#3 Posted : Friday, November 27, 2009 12:26:56 PM(UTC)
blowlamp

Rank: Senior Member

Joined: 6/28/2008(UTC)
Posts: 648
Thanks, Zumer. That worked well:). Much appreciated.

Martin.
Back to top
Tim Olson  
#4 Posted : Thursday, August 26, 2010 10:04:25 AM(UTC)
Tim Olson

Rank: Senior Member

Joined: 2/2/2007(UTC)
Posts: 5,447
United States

Was thanked: 499 time(s) in 353 post(s)
>>I'm attempting to create an arc that is tangent to a
>>circle and a straight line.

Martin

Some progress here in 947.

http://www.csi-concepts.com/Demo/videos/cirTan3.mov

Tim
Tim Olson
IMSI Design/Encore
Back to top
blowlamp  
#5 Posted : Thursday, August 26, 2010 12:17:57 PM(UTC)
blowlamp

Rank: Senior Member

Joined: 6/28/2008(UTC)
Posts: 648
Oh yes!! Thanks, Tim and Co.

Martin.
Back to top
blowlamp  
#6 Posted : Thursday, February 17, 2011 3:42:19 PM(UTC)
blowlamp

Rank: Senior Member

Joined: 6/28/2008(UTC)
Posts: 648
I've done a video and near the beginning, it shows the Tangent Points Arc tool in use to make an ark that is tangential to both the green line and the circle.

You can see that if there was a Tangent Snap option on the third click of this tool, then it would be very easy to make a neat arc.

The second part of the video shows how I'm doing this job at the moment, but it would be much easier with the Tangent option enabled.


Martin.

http://www.screencast.com/users...e-41ef-8a20-9af7119117d3
Back to top
NickB  
#7 Posted : Thursday, February 17, 2011 4:02:38 PM(UTC)
NickB

Rank: Senior Member

Joined: 2/19/2007(UTC)
Posts: 501

Was thanked: 2 time(s) in 1 post(s)
Martin,
Good screencast.

Something that simple should not be so difficult and require such an ingenious work around.
Shark FX 9 build 1143
OS X 9.5
3.6 GHz Core i7, 8GB, GTX 760 2GB

matter.cc
Back to top
WWW
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF.NET 2.1.2 | YAF.NET © 2003-2024, Yet Another Forum.NET