logo
NOTICE:  This is the new PunchCAD forum. You should have received an email with your new password around August 27, 2014. If you did not, or would like it reset, simply use the Lost Password feature, and enter Answer as the security answer.
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
Guide skin solid (simple test) (#2394)
Options
Go to last post Go to first unread
Previous Topic Next Topic
Steve.M  
#1 Posted : Sunday, June 14, 2009 5:29:55 AM(UTC)
Steve.M

Rank: Senior Member

Joined: 6/18/2008(UTC)
Posts: 978

Was thanked: 1 time(s) in 1 post(s)
I have been looking at Shark and the Guide skin solid.

For a simple check I made 4 cross sections on an Ellipse

01: The cross sections and Ellipse for Guide.
02: The solid created
03: I trimmed off a section. Copied the edges for a check.
04: A view of the section edges.

Would this be deemed as correct :D

EDIT:
After changing the Ellipse to a Int-spline the result was better, however, the cross section had decreased in size on the width by over 10% on the section I made
Steve.M attached the following image(s):
01.jpg (41kb) downloaded 5 time(s).
02.jpg (89kb) downloaded 5 time(s).
03.jpg (57kb) downloaded 5 time(s).
04.jpg (12kb) downloaded 5 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
Tim Olson  
#2 Posted : Monday, June 29, 2009 11:45:57 PM(UTC)
Tim Olson

Rank: Senior Member

Joined: 2/2/2007(UTC)
Posts: 5,447
United States

Was thanked: 499 time(s) in 353 post(s)
01: The cross sections and Ellipse for Guide.
02: The solid created
03: I trimmed off a section. Copied the edges for a check.
04: A view of the section edges.


Hi Steve,

I believe this is updated in 838 if you were to regen the part. (force regen in concept explorer via right click).

Tim
Tim Olson
IMSI Design/Encore
Back to top
Steve.M  
#3 Posted : Tuesday, June 30, 2009 1:25:00 PM(UTC)
Steve.M

Rank: Senior Member

Joined: 6/18/2008(UTC)
Posts: 978

Was thanked: 1 time(s) in 1 post(s)
Originally Posted by: Tim Olson Go to Quoted Post
I believe this is updated in 838 if you were to regen the part. (force regen in concept explorer via right click).


Hello Tim,

As I currently only use the demo of shark (for verification of any problems I find in pro) I will need to download the latest build to verify.

Will any changes be made to the guide skin surfaces which currently give the same bad output as shown above? If yes, then will those optimizations be added to the pro version?


- Steve
Back to top
Steve.M  
#4 Posted : Friday, July 3, 2009 6:43:47 PM(UTC)
Steve.M

Rank: Senior Member

Joined: 6/18/2008(UTC)
Posts: 978

Was thanked: 1 time(s) in 1 post(s)
Originally Posted by: Tim Olson Go to Quoted Post
I believe this is updated in 838



EDIT


After a few checks I see very little improvement (and that is only on the guide skin solid, the guide skin surface as no improvement at all). Is it a case that Acis is not capable of this type of (which should be very simple) construction?


- Steve
Back to top
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF.NET 2.1.2 | YAF.NET © 2003-2024, Yet Another Forum.NET