logo
NOTICE:  This is the new PunchCAD forum. You should have received an email with your new password around August 27, 2014. If you did not, or would like it reset, simply use the Lost Password feature, and enter Answer as the security answer.
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
A newbie question about extrusion (#2654)
Options
Go to last post Go to first unread
Previous Topic Next Topic
romu  
#1 Posted : Friday, November 20, 2009 7:11:16 AM(UTC)
romu

Rank: Junior Member

Joined: 10/13/2009(UTC)
Posts: 15
Dear all,
Here is joined a little VCP file. I would like to extrude the 2 little rectangles on the right along the 2 curves.

As everyone can see on the joined image, no problem by using the One Rail Sweep Solid tool. But my problem comes from the corner, this little volume between the 2 rectangles which I want to be filled too.

My question is really about to know the ViaCAD "best practise" to perform such an operation. Thanks for your advices.
File Attachment(s):
test.vcp (42kb) downloaded 5 time(s).
romu attached the following image(s):
extrusion.jpg (91kb) downloaded 5 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
WWW
ZeroLengthCurve  
#2 Posted : Friday, November 20, 2009 12:06:45 PM(UTC)
ZeroLengthCurve

Rank: Senior Member

Joined: 5/15/2008(UTC)
Posts: 987

Thanks: 19 times
Was thanked: 35 time(s) in 24 post(s)
Have you tried applying a radius, then extruding it as a surface or applying a surface, then extruding it as a solid?
Back to top
hadmack  
#3 Posted : Friday, November 20, 2009 12:24:07 PM(UTC)
hadmack

Rank: Junior Member

Joined: 1/26/2009(UTC)
Posts: 13
You could also overlap the two parts so that there is a sharp corner and then use the blend tool to round it on both sides.
You would have to perform a union first though.
Back to top
romu  
#4 Posted : Monday, November 23, 2009 6:22:47 AM(UTC)
romu

Rank: Junior Member

Joined: 10/13/2009(UTC)
Posts: 15
Originally Posted by: ZeroLengthCurve Go to Quoted Post
Have you tried applying a radius, then extruding it as a surface or applying a surface, then extruding it as a solid?


No, but that's an idea worth to try. Thanks.
Back to top
WWW
romu  
#5 Posted : Monday, November 23, 2009 6:23:58 AM(UTC)
romu

Rank: Junior Member

Joined: 10/13/2009(UTC)
Posts: 15
Originally Posted by: hadmack Go to Quoted Post
You could also overlap the two parts so that there is a sharp corner and then use the blend tool to round it on both sides.
You would have to perform a union first though.


Ok, thanks, let's try this too. I'll give you a feedback, as soon as I would have made some tests. Thanks for your help.
Back to top
WWW
romu  
#6 Posted : Monday, November 23, 2009 6:35:06 AM(UTC)
romu

Rank: Junior Member

Joined: 10/13/2009(UTC)
Posts: 15
After a little test, the Hadmack method is perfect. I just moved the vertical rectangle on the extreme right vertices of the horizontal rectangle, and the One Rail Sweep Solid tool creates the solid perfectly.

Thanks for the tip. Here is joined a little image about the result.
romu attached the following image(s):
extrusion.jpg (83kb) downloaded 5 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
WWW
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF.NET 2.1.2 | YAF.NET © 2003-2024, Yet Another Forum.NET