logo
NOTICE:  This is the new PunchCAD forum. You should have received an email with your new password around August 27, 2014. If you did not, or would like it reset, simply use the Lost Password feature, and enter Answer as the security answer.
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
Printing multiple page?? (#1136)
Options
Go to last post Go to first unread
Previous Topic Next Topic
TerryPinotti  
#1 Posted : Monday, June 9, 2008 12:36:08 PM(UTC)
TerryPinotti

Rank: Junior Member

Joined: 4/7/2008(UTC)
Posts: 3
Hello everyone,

I have an Epson printer that prints in color on pages up to 13"X19". I sometimes like to print drawings at 1:1 and the images then take up 2 pages.

When I do this only one of the 2 pages is correct. The other page has about 1/3 of what should be on the printed page missing. It is like the image for the second page was shifted towards the border between the pages by several inches.

Any suggestions?

Thanks,
Back to top
Tim Olson  
#2 Posted : Monday, June 9, 2008 1:45:56 PM(UTC)
Tim Olson

Rank: Senior Member

Joined: 2/2/2007(UTC)
Posts: 5,447
United States

Was thanked: 499 time(s) in 353 post(s)
TerryPinotti wrote:
Hello everyone,

I have an Epson printer that prints in color on pages up to 13"X19". I sometimes like to print drawings at 1:1 and the images then take up 2 pages.

When I do this only one of the 2 pages is correct. The other page has about 1/3 of what should be on the printed page missing. It is like the image for the second page was shifted towards the border between the pages by several inches.

Any suggestions?

Thanks,


Hi Terry,

Does everything look correct when you turn on show page breaks?

Tim
Tim Olson
IMSI Design/Encore
Back to top
TerryPinotti  
#3 Posted : Tuesday, June 10, 2008 9:32:52 AM(UTC)
TerryPinotti

Rank: Junior Member

Joined: 4/7/2008(UTC)
Posts: 3
Tim Olson wrote:
Hi Terry,

Does everything look correct when you turn on show page breaks?

Tim


Tim,

Yes, the printer setup window and showing page breaks and other things I have looked at show everything as expected. Only the actual second page printed is incorrect.

Since my drawing is symetric about the Y-axis, I printed the drawing twice and took 2 copies of the first page and used them to get the picture I needed by turning one of the first pages 180 degrees.

Thanks for reply,
Terry
Back to top
TerryPinotti  
#4 Posted : Thursday, June 26, 2008 10:04:13 AM(UTC)
TerryPinotti

Rank: Junior Member

Joined: 4/7/2008(UTC)
Posts: 3
I figured out my problem and it was operator error. I had one thing set up to use 13x19 paper but was putting 11x17 paper in the printer, thus the 2" gap.

Thanks for the help. I did point me in the right direction where I discovered my error.

Terry
Back to top
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF.NET 2.1.2 | YAF.NET © 2003-2024, Yet Another Forum.NET