logo
NOTICE:  This is the new PunchCAD forum. You should have received an email with your new password around August 27, 2014. If you did not, or would like it reset, simply use the Lost Password feature, and enter Answer as the security answer.
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Options
Go to last post Go to first unread
songjaejoong  
#1 Posted : Friday, April 27, 2007 4:08:21 PM(UTC)
songjaejoong

Rank: Junior Member

Joined: 4/27/2007(UTC)
Posts: 1

I am using Alibre Design Express for free, and it is good for me.
I appreciate to Alibre team.

But sometimes I need to buy $1000 Alibre Professional,
for use of boolean function.

As ViaCAD is much cheapper than Alibre Professional
I am thingking about moving to ViaCAD.

But to learn new software, and to be accoustumed to it,
it will take several weeks for me.

Is there anyone who can compare ViaCAD with Alibre?
Though ViadCAD is very cheap, if it is not good,
then I may consume several weeks again.

I will wait for Alibre comparison.
If you are kind enough, please send me your opinion.
songjaejoong@ daum.net

Thank you.
Tim Olson  
#2 Posted : Saturday, April 28, 2007 2:38:23 PM(UTC)
Tim Olson

Rank: Senior Member

Joined: 2/2/2007(UTC)
Posts: 5,446
United States

Was thanked: 498 time(s) in 352 post(s)
>But sometimes I need to buy $1000 Alibre Professional,
>>for use of boolean function.

Since Alibre and ViaCAD are based on the same ACIS kernel, your booleans should be the same assuming each product is on R16 or R17. ViaCAD supports add, subtract, and intersection boolean operations. Plus trim and split operations which are based on booleans.

>But to learn new software, and to be accoustumed to it,
>it will take several weeks for me.
ViaCAD has close to a gig of videos and tutorials that may help out as you learn at your own pace. Also check out the Tips section of this forum for useful training material.

>>Alibre?
Alibre has dimension constraints not found in ViaCAD. We do not have a limit as to the number of parts you can create in ViaCAD.
Tim Olson
IMSI Design/Encore
rjotto  
#3 Posted : Monday, April 30, 2007 8:44:19 PM(UTC)
rjotto

Rank: Junior Member

Joined: 2/19/2007(UTC)
Posts: 8

songjaejoong wrote:
I am using Alibre Design Express for free, and it is good for me.
I appreciate to Alibre team.

But sometimes I need to buy $1000 Alibre Professional,
for use of boolean function.

As ViaCAD is much cheapper than Alibre Professional
I am thingking about moving to ViaCAD.

But to learn new software, and to be accoustumed to it,
it will take several weeks for me.

Is there anyone who can compare ViaCAD with Alibre?
Though ViadCAD is very cheap, if it is not good,
then I may consume several weeks again.

I will wait for Alibre comparison.
If you are kind enough, please send me your opinion.
songjaejoong@ daum.net

Thank you.

Hi, for what it's worth, I switched from Alibre Design (pro) to Concepts Unlimited about 4 months ago. I understand that ViaCAD is an "apples & oranges" comparison to CU, but the basics are the same.
Why the switch? Simple... I mean Alibre is NOT simple. It became too way to hard to make money when I had to constrain every single thing. Alibre was overly complex. I found myself using it only when a customer required a visualization. Otherwise, I'd sketch concepts by hand and just create tool paths directly in my CAM software.
Anyway, now I find CU to be flexible enough that I can sketch out things in 3D and skip a few prototype iterations (eureka!)
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.