This is the new PunchCAD forum. You should have received an email with your new password around August 27, 2014. If you did not, or would like it reset, simply use the
feature, and enter Answer as the security answer.
Welcome Guest! To enable all features please
ViaCAD & Shark
Smoothing a transition between two surfaces
Post a reply
Post a reply
Maximum number of characters in each post is: 32767
[quote=Guest;32392]Uuuum strange one. Do you have the files? I like a challenge!!!!! [/quote]
[YOUTUBE]Put YouTube URL in here[/YOUTUBE]
[HIDE-THANKS=x]The tag hides content from people who have below then X thanks received.[/HIDE-THANKS]
[HIDE-REPLY-THANKS]The tag hides content from people until they either reply in the same thread or press the thank you button for the post.[/HIDE-REPLY-THANKS]
[HIDE-REPLY]The tag hides content from people until they replied in the same thread.[/HIDE-REPLY]
[GROUP-HIDE]Hide the Content from Guests, or other Roles if defined.[/GROUP-HIDE]
[dailymotion]Enter Dailymotion Url (http://www.dailymotion.com/video/xxxx)[/dailymotion]
[HIDE-POSTS=x]The tag hides content from people who have below then X posts.[/HIDE-POSTS]
[GOOGLEMAPS]Enter Google Maps Url[/GOOGLEMAPS]
[ALBUMIMG]Enter a Album Image Number[/ALBUMIMG]
[SPOILER]Put Spoiler Text in here[/SPOILER]
[HIDE]This tag hides content from people until they press the thank you button for the post.[/HIDE]
[USERLINK]Put User Name Here[/USERLINK]
[TWITTER]Enter the Status ID of the Tweet you want to embed[/TWITTER]
Attach files to this post?
Enter The Letters From The Security Image:
Last 10 Posts (In reverse order)
Thursday, April 20, 2017 11:45:06 AM(UTC)
Uuuum strange one. Do you have the files? I like a challenge!!!!!
Thursday, April 20, 2017 9:05:31 AM(UTC)
Thanks but the problem is that doing that will not recreate the whole surface properly - it's just too long and curvy. I've tried skin with quides and a net surface. That's why I needed to make it in two pieces and join them. The way they are created they ought to be perfectly tangent at the joint, yet they show this discontinouity.
Thursday, April 20, 2017 7:39:30 AM(UTC)
One thing I have been doing is, create a new layer, change the surface to curves (keeping the original) put planes on the long edges of the curves. Intersect the surface with the planes to generate new curves. These will be coming across the shorter section of the swoopy thing in your image. Use the curves to recreate the entire surface (skin surface or similar). Use Coordinate compare to check back against original surface
Thursday, April 20, 2017 7:36:25 AM(UTC)
Have you got the files?
Monday, April 03, 2017 8:37:54 PM(UTC)
I have created two surfaces that share a common edge. The long (orange) skin surface was created using two guides and two curves, one of them is an edge belonging to the blue surface.
After joining the surfaces into one, where they meet, there is a small but noticeable edge or a crease.
How do I get rid of it to have a smooth, continous joint surface?
I've tried filleting, trimming the surfaces back a little and creating a lofted surface in between , thickening them and trying to create a blend on the solid... nothing works.
The attached images illustrate the situation - any tips would be greatly appreciated.
Powered by YAF.NET 2.1.2
YAF.NET © 2003-2017, Yet Another Forum.NET